1. Pengenalan dan Lebihview
This manual provides essential instructions for the proper setup, operation, and maintenance of your Ohaus Defender 3000 Bench Scale, Model D31P15BR. Please read this manual thoroughly before using the scale to ensure accurate and safe operation.
Image 1.1: Ohaus Defender 3000 Bench Scale, Model D31P15BR. This image displays the complete bench scale unit, including the weighing platform, support column, and digital indicator.
Ciri-ciri Utama:
- kapasiti: 33 lb / 15 kg (depending on calibration unit used).
- Resolusi: 1:6000 to 7500d; NTEP certified and Measurement Canada approved to 3,000e.
- Pembinaan: 304 stainless steel pan with painted carbon steel frame and aluminum IP67 load cell.
- Penunjuk: High-impact durable ABS plastic housing with a reversible face for wall, column, or table-top mounting.
- Kestabilan: Adjustable non-slip rubber leveling feet with an externally visible level indicator.
2. Persediaan
2.1 Membongkar dan Pemeriksaan
Carefully remove all components from the packaging. Inspect the scale for any signs of damage that may have occurred during transit. Retain packaging materials for future transport or storage.
2.2 Penempatan
Place the scale on a stable, level surface free from vibrations, drafts, and extreme temperature changes. Ensure adequate space around the scale for operation and maintenance.
2.3 Meratakan Skala
- Locate the bubble level indicator, typically found near the indicator or on the base.
- Adjust the four non-slip rubber leveling feet by turning them clockwise or counter-clockwise until the bubble is centered within the indicator circle. This ensures accurate weighing.
2.4 Indicator Mounting
The indicator features a reversible face and can be mounted in several configurations:
- Column Mount: Attach the indicator to the provided column using the appropriate hardware.
- Pemasangan Dinding: Secure the indicator to a wall using suitable fasteners (not included) through the designated mounting points.
- Table-Top Mount: Position the indicator on a flat surface next to the weighing platform.
Ensure all connections between the indicator and the weighing platform are secure before proceeding.
3. Operasi
3.1 Menghidupkan/Mematikan
Connect the scale to a suitable power source. Press the HIDUP/MATI button on the indicator to power the scale on or off. The backlit liquid crystal display (LCD) will illuminate upon startup.
3.2 Penimbangan Asas
- Ensure the scale is powered on and displays "0.00" or a stable zero reading. If not, press the SIFAR butang.
- Carefully place the item to be weighed onto the center of the stainless steel weighing pan.
- Wait for the reading on the display to stabilize. The displayed value represents the weight of the item.
- Remove the item from the pan. The display should return to zero.
3.3 Taring (Subtracting Container Weight)
To weigh an item in a container, use the Tare function:
- Place the empty container on the weighing pan.
- Tekan ke SASARAN button. The display will show "0.00" and a "T" or "NET" indicator, indicating the container's weight has been tared out.
- Place the item to be weighed into the container. The display will show only the net weight of the item.
- Remove both the item and container. The display may show a negative value equal to the tared weight. Press SIFAR untuk kembali kepada sifar.
4. Penyelenggaraan
4.1 Pembersihan
Regular cleaning helps maintain the scale's performance and longevity. The weighing pan is made of 304 stainless steel, and the indicator housing is high-impact ABS plastic.
- Lap permukaan penimbang dengan iklanamp kain dan detergen lembut.
- Jangan gunakan pembersih yang kasar, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan atau komponen dalaman.
- Ensure no liquids enter the indicator housing or the load cell area. Although the load cell is IP67 rated for dust and water ingress, proper care is recommended.
- Always disconnect the scale from the power source before cleaning.
4.2 Penentukuran
The Ohaus Defender 3000 Bench Scale is factory calibrated. However, periodic calibration may be required to maintain accuracy, especially after relocation or significant temperature changes. Refer to the full technical manual for detailed calibration procedures or contact authorized service personnel.
5. Penyelesaian masalah
If you encounter issues with your scale, refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Skala tidak dihidupkan | No power supply; loose cable | Periksa sambungan kuasa; memastikan saluran keluar berfungsi. |
| Bacaan tidak tepat | Scale not level; drafts; calibration required | Level the scale; move to a stable environment; perform calibration. |
| Display shows "OVERLOAD" | Berat melebihi kapasiti | Buang berat berlebihan dengan segera. |
| Bacaan tidak stabil | Vibrations; air currents; damaged load cell | Relocate scale; shield from drafts; contact service if persistent. |
For issues not listed here or if problems persist, please contact Ohaus customer support or an authorized service technician.
6. Spesifikasi
Detailed technical specifications for the Ohaus Defender 3000 Bench Scale Model D31P15BR:
| Spesifikasi | Perincian |
|---|---|
| Jenama | Ohaus |
| Nombor Model | D31P15BR (Manufacturer Part Number: 30369116) |
| Kapasiti | 33 lb / 15 kg |
| Ketepatan Bacaan | 0.005 lb (2 g) |
| Resolusi | 1:6000 to 7500d; NTEP certified to 3,000e |
| Jenis Paparan | Backlit Liquid Crystal Display (LCD) |
| Jenis Penimbang Timbang | Skala Kaunter |
| Jenis Pengukuran | Imperial / Metrik |
| Material (Pan) | 304 Keluli Tahan Karat |
| Bahan (Bingkai) | Painted Carbon Steel |
| Material (Load Cell) | Aluminum, IP67 rated |
| Material (Indicator Housing) | Akrilonitril Butadiena Stirena (ABS) |
| Berat Barang | 33 paun |
| Ciri Khas | Adjustable Leveling Feet, NTEP Certification, Reversible Indicator Face |
7. Waranti dan Sokongan
For detailed warranty information, please refer to the official warranty statement provided with your product or visit the Ohaus webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
For technical support, service, or spare parts, please contact your local Ohaus representative or visit the official Ohaus support portal. Provide your model number (D31P15BR) and serial number when requesting support.