pengenalan
Thank you for choosing the SKMEI Model 1235 Analog-Digital Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure optimal performance and longevity. Please read this manual carefully before using your watch.
Produk Selesaiview
The SKMEI Model 1235 is a robust analog-digital wristwatch designed for daily wear and sports activities. It features a dual time display, stopwatch, alarm, and backlight functions, all housed in a durable plastic case with 50-meter water resistance.
Rajah 1: Depan view of the SKMEI Model 1235 Analog-Digital Watch. This image displays the watch's black case, gold accents, and the dual analog-digital display. The 'LIGHT', 'MODE', 'START', and 'RESET' buttons are clearly visible.
Fungsi Butang:
- Butang CAHAYA: Mengaktifkan lampu latar untuk paparan digital.
- Butang MOD: Cycles through different operating modes (Time, Chronograph, Alarm).
- Butang MULA: Used to start/stop functions in Chronograph mode, and adjust values during setting.
- Butang TETAP SEMULA: Used to reset functions in Chronograph mode, and select items during setting.
Persediaan
1. Setting Analog Time:
The analog hands are set independently from the digital display. Pull out the crown located on the right side of the watch case. Rotate the crown to adjust the hour and minute hands to the desired time. Once set, push the crown back in to secure the time.
2. Setting Digital Time and Date:
- Daripada paparan masa biasa, tekan butang MODE button three times to enter the time setting mode. The seconds digits will flash.
- Tekan ke TETAP SEMULA butang untuk mengitar item tetapan: Saat → Jam → Minit → Bulan → Tarikh → Hari dalam Minggu.
- Gunakan MULAKAN button to adjust the flashing value. Hold the MULAKAN button to increase values rapidly.
- Untuk bertukar antara format 12 jam dan 24 jam, tekan butang TETAP SEMULA button until the hour digits are flashing, then press the MULAKAN butang untuk menogol.
- Setelah semua tetapan dilaraskan, tekan butang MODE butang untuk keluar dari mod tetapan dan kembali ke paparan masa biasa.
Mod Pengendalian
1. Chronograph (Stopwatch) Mode:
- Daripada paparan masa biasa, tekan butang MODE butang sekali untuk memasuki mod Kronograf. Paparan akan menunjukkan "00:00:00".
- Tekan ke MULAKAN butang untuk memulakan pemasaan.
- Tekan ke MULAKAN butang sekali lagi untuk menjeda masa.
- Tekan ke TETAP SEMULA butang semasa dijeda untuk menetapkan semula jam randik kepada "00:00:00".
- To return to normal time display, press the MODE butang.
2. Mod Penggera:
- Daripada paparan masa biasa, tekan butang MODE button twice to enter Alarm mode. The alarm time will be displayed.
- Tekan ke TETAP SEMULA button to select the hour or minute digits for setting.
- Gunakan MULAKAN butang untuk melaraskan nilai berkelip.
- Untuk mengaktifkan atau menyahaktifkan penggera, tekan MULAKAN dan TETAP SEMULA buttons simultaneously in Alarm mode. An alarm icon will appear/disappear.
- To return to normal time display, press the MODE butang.
3. Backlight Function:
Tekan ke CAHAYA button (top-left) at any time to illuminate the digital display for a few seconds, allowing visibility in low-light conditions.
Figure 2: The SKMEI Model 1235 watch with its backlight activated, illuminating the digital display for improved visibility in dark environments.
Penyelenggaraan
- Pembersihan: Lap jam tangan dengan kerap menggunakan kain lembut dan kering untuk menghilangkan habuk dan kotoran. Untuk kotoran degil, gunakan sedikit kain pembersihamp kain dan kemudian keringkan dengan teliti. Elakkan bahan kimia yang keras atau pembersih yang kasar.
- Tahan Air: This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming or showering. Do not press any buttons while the watch is submerged in water, as this can compromise the water seal. Avoid hot water, as temperature changes can affect the seals.
- Suhu: Avoid exposing the watch to extreme temperatures (hot or cold) for extended periods, as this can affect battery life and accuracy.
- Kesan: While durable, avoid strong impacts or dropping the watch, which can damage internal components or the case.
- Penggantian Bateri: When the display becomes dim or the watch stops functioning, the battery may need replacement. This should ideally be performed by a qualified watch technician to ensure proper sealing and functionality.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan digital kosong atau malap. | Bateri lemah. | Gantikan bateri. |
| Masa digital tidak betul. | Masa tidak ditetapkan dengan betul atau pelarasan tidak sengaja. | Refer to "Setting Digital Time and Date" section to reset the time. |
| Analog hands are incorrect. | Analog time not set correctly or accidental adjustment of the crown. | Refer to "Setting Analog Time" section to reset the hands. Ensure the crown is pushed in fully. |
| Penggera tidak berbunyi. | Alarm is deactivated or set incorrectly. | Refer to "Alarm Mode" section to activate and set the alarm correctly. |
| Air di dalam jam tangan. | Buttons pressed underwater or seals compromised. | Immediately take the watch to a qualified technician for inspection and repair. Avoid further water exposure. |
Spesifikasi
| Jenama | SKMEI |
| Nombor Model | 1235 |
| Jenis Paparan | Analog-Digital |
| Jenis Pergerakan | Kuarza |
| Bahan Kes | plastik |
| Bahan Tingkap Dail | damar |
| Bahan Band | Plastik (PU) |
| Jenis Genggam | gesper |
| Diameter Kes | 48 mm |
| Ketebalan Kes | 17 mm |
| Lebar Jalur | 24 mm |
| Panjang Jalur | 26.5 sm |
| Kedalaman Rintangan Air | 50 Meter (5 ATM) |
| Ciri Khas | Alarm, Light, Chronograph |
| Berat Barang | 70 g |
Waranti dan Sokongan
This SKMEI Model 1235 watch comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and what is covered. For technical support or warranty claims, please contact the authorized SKMEI dealer or service center from whom you purchased the product. Keep your proof of purchase for warranty validation.