BMC RESmart GII Auto CPAP E-20A-H with Humidifier User Manual

1. Pengenalan

This manual provides essential information for the safe and effective operation, setup, and maintenance of your BMC RESmart GII Auto CPAP System E-20A-H with Humidifier. Please read this manual thoroughly before using the device and retain it for future reference. This device is intended for the treatment of Obstructive Sleep Apnea (OSA).

2. Maklumat Keselamatan

Amaran Keselamatan Penting:

• Always disconnect the device from the power supply before cleaning or performing any maintenance.
• Jangan rendam peranti di dalam air atau sebarang cecair lain.
• Use only accessories and parts recommended by BMC.
• Keep the device away from direct sunlight, heat sources, and sharp objects.
• Consult your physician or healthcare provider if you experience any unusual symptoms or discomfort during use.
• Peranti ini tidak bertujuan untuk sokongan hayat.

3. Produk Lebihview

The BMC RESmart GII Auto CPAP System E-20A-H is an intelligent device designed for the treatment of Obstructive Sleep Apnea. It features an integrated humidifier for enhanced comfort.

Komponen Utama:

• Unit Utama: Houses the motor, control electronics, and display.
• Pelembap: Integrated unit with dual water chambers for efficient humidification.
• Paparan LCD 3.5-inci: Provides real-time information and access to settings.
• Tombol kawalan: For navigating menus and adjusting settings.
• Saluran Udara: Connects to the CPAP tubing.
• Saluran Kuasa: Untuk menyambungkan penyesuai kuasa.
• Slot Kad SD: For compliance data storage and retrieval (iCode II).
• SpO2 Kit Port (Optional): For real-time blood oxygen saturation and pulse rate monitoring.

An image showing the BMC RESmart GII Auto CPAP device, featuring its main unit, control knob, and integrated humidifier. The device is black with a clear humidifier chamber visible.

4. Persediaan

4.1 Membongkar

1. Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
2. Inspect the device and accessories for any signs of damage. Do not use if damaged.

4.2 Kuasa Penyambung

1. Connect the power adapter to the power inlet on the back of the device.
2. Palamkan kord kuasa ke salur keluar elektrik yang sesuai.

4.3 Filling the Humidifier

1. Open the humidifier chamber by sliding or lifting the cover.
2. Fill the water chamber with distilled water up to the maximum fill line. Do not overfill.
3. Close the humidifier chamber securely.

4.4 Connecting Tubing and Mask

1. Connect one end of the CPAP tubing to the air outlet on the device.
2. Connect the other end of the tubing to your prescribed CPAP mask.
3. Fit the mask comfortably and securely according to its own instructions.

5. Arahan Operasi

5.1 Terapi Permulaan

1. Ensure the device is properly set up and connected.
2. Pakai topeng anda.
3. Press the Start/Stop button (usually the control knob) to begin therapy. The device will automatically start delivering air.

5.2 Melaraskan Tetapan

Use the control knob to navigate the menu on the 3.5-inch LCD display. Press the knob to select an option and rotate to adjust values.

• Julat Tekanan: 4-20 cm H2O (Auto CPAP adjusts automatically within this range).
• Ramp Masa: Adjusts the time (0-60 minutes) for the pressure to gradually increase to the prescribed level.
• Humidification Level: Select from Off or levels 1-5 to control the humidity output.
• Reslex: Pressure relief feature (Off/1/2/3) for exhalation comfort.
• Auto Hidup/Mati: Can be enabled or disabled (Off by default).

5.3 Terapi Penghentian

Press the Start/Stop button again to end therapy. The device will power down.

5.4 iCode II Data Retrieval

Compliance data is encoded by a QR code displayed on the device's screen. Use a compatible application to scan the QR code for quick data retrieval and monitoring.

6. Penyelenggaraan

Regular cleaning and maintenance are crucial for the optimal performance and longevity of your device.

6.1 Pembersihan Harian

• Humidifier Water Chamber: Empty any remaining water and rinse with distilled water. Allow to air dry.
• Topeng: Wipe down the mask cushion with a damp cloth or specialized CPAP wipes.

6.2 Pembersihan Mingguan

• Humidifier Water Chamber: Wash with mild soap and warm water. Rinse thoroughly and allow to air dry completely.
• Tiub CPAP: Wash with mild soap and warm water. Rinse thoroughly and hang to air dry.
• Penapis Udara: Inspect the reusable air filter (if applicable). If dirty, rinse under running water and allow to air dry. Replace disposable filters as recommended.

6.3 Penjagaan Am

• Lap bahagian luar peranti dengan iklanamp cloth. Do not use abrasive cleaners or immerse the device.
• Replace air filters regularly as per manufacturer recommendations or if visibly dirty.

7. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:

If the problem persists, contact your healthcare provider or the manufacturer's customer support.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support, service, or questions regarding your BMC RESmart GII Auto CPAP System, please contact the seller or the manufacturer directly.