respekta CH 22098-90 IXB Wall-Mounted Cooker Hood

1. Pengenalan dan Maklumat Keselamatan

This manual provides important information regarding the installation, operation, and maintenance of your respekta CH 22098-90 IXB wall-mounted cooker hood. Please read these instructions carefully before installation and use, and keep them for future reference.

1.1 Amaran Keselamatan Am

• Pastikan pemasangan elektrik mematuhi peraturan tempatan.
• Jangan benarkan kanak-kanak mengendalikan perkakas.
• Bersihkan penapis gris secara kerap untuk mengelakkan bahaya kebakaran.
• Jangan flambé di bawah hud dapur.
• Ensure adequate ventilation when the cooker hood is used simultaneously with gas or other fuel-burning appliances.
• Putuskan sambungan perkakas daripada bekalan kuasa sebelum sebarang pembersihan atau penyelenggaraan.

2. Produk Lebihview

The respekta CH 22098-90 IXB is a 90 cm wall-mounted cooker hood designed to efficiently remove cooking vapors and odors from your kitchen. It features a high-quality stainless steel construction, LED lighting, and three power levels for effective ventilation.

Imej: Depan view of the respekta CH 22098-90 IXB wall-mounted cooker hood.

2.1 Komponen yang Disertakan

• Unit Hud Pemasak
• Metal Grease Filter (MIZ 2210)
• Bahan Pemasangan
• Manual Arahan (dokumen ini)

3. Persediaan dan Pemasangan

The cooker hood is designed for wall mounting. Ensure the mounting surface is strong enough to support the appliance's weight (approximately 15 kg) and that there is sufficient space for installation.

3.1 Dimensi Pemasangan

Refer to the following diagrams for detailed mounting dimensions and clearances. It is recommended to maintain a minimum distance of 65 cm between the cooking surface and the bottom of the cooker hood.

Image: Diagram showing overall dimensions of the cooker hood, including width (900mm), depth (500mm), and height (80mm for the main body, 400-780mm for the chimney).

Image: Diagram illustrating ducting connection details, including a 150mm diameter exhaust pipe connection and chimney dimensions.

3.2 Sambungan Elektrik

Connect the cooker hood to a standard 230 Volt, 50 Hz power supply. The appliance comes with a 120 cm power cable. Ensure the power outlet is easily accessible after installation.

3.3 Ducting Connection (Exhaust Air Operation)

For exhaust air operation, connect the cooker hood to an external ventilation system using a 150 mm diameter duct. Ensure the ducting is as short and straight as possible to maximize extraction efficiency.

3.4 Recirculation Operation

For recirculation operation, charcoal filters (not included) must be installed. The filtered air is then returned to the kitchen. Consult the charcoal filter instructions for proper installation.

4. Arahan Operasi

The cooker hood is controlled via push buttons located on the front panel.

4.1 Tahap Kuasa

The appliance offers 3 power levels to adjust the extraction rate according to your cooking needs. Press the corresponding button to select the desired speed:

• Tahap 1: Low speed for light cooking and simmering.
• Tahap 2: Medium speed for general cooking.
• Tahap 3: High speed for heavy frying or strong odors.

4.2 Lampu LED

Press the light button to turn the integrated LED lighting on or off. The LED lights provide illumination for your cooking area.

5. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your cooker hood. Always disconnect the appliance from the power supply before performing any maintenance.

5.1 Cleaning the Metal Grease Filters

The metal grease filters (MIZ 2210) collect grease particles from cooking vapors. They should be cleaned regularly, approximately every 3-4 weeks, depending on usage. To clean:

1. Remove the filters by releasing selak mereka.
2. Basuh penapis dengan tangan dalam air sabun panas atau dalam mesin basuh pinggan mangkuk pada kitaran suhu rendah.
3. Benarkan penapis kering sepenuhnya sebelum memasangnya semula.

Note: Discoloration of the filters may occur in the dishwasher but does not affect their performance.

5.2 Cleaning the Cooker Hood Surfaces

Clean the stainless steel surfaces with a soft cloth and a non-abrasive stainless steel cleaner. Avoid using abrasive sponges, harsh detergents, or corrosive cleaners, as these can damage the finish.

5.3 Penggantian Lampu LED

The LED lighting system is designed for long life. If replacement is necessary, contact qualified service personnel. Do not attempt to replace the LED modules yourself.

6. Penyelesaian masalah

Sebelum menghubungi perkhidmatan pelanggan, sila semak isu dan penyelesaian biasa berikut:

7. Spesifikasi