1. Pengenalan
This manual provides essential information for the installation, operation, and maintenance of the Black Box LPH008A-R2 Extreme PoE+ Switch. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.
The Black Box LPH008A-R2 is a hardened Gigabit PoE+ switch designed for robust performance in demanding environments. It features eight 10/100/1000-Mbps RJ-45 ports with Power over Ethernet (PoE+) capabilities, compliant with 802.3at standards.
2. Maklumat Keselamatan
- Pastikan pembumian peranti yang betul.
- Do not expose the switch to moisture or extreme humidity.
- Use only the specified power supply. Incorrect voltage boleh merosakkan peranti.
- Elakkan menyekat bukaan pengudaraan untuk mengelakkan terlalu panas.
- Putuskan sambungan kuasa sebelum membersihkan atau menservis peranti.
- Pemasangan hendaklah dilakukan oleh pegawai yang berkelayakan.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Black Box LPH008A-R2 Extreme PoE+ Switch
- Dokumentasi (manual pengguna ini)
- Power terminal block (pre-installed or included)
Note: Power supply unit may be sold separately depending on the specific product bundle.
4. Produk Lebihview
4.1 Panel Depan
The front panel of the LPH008A-R2 switch features the network ports and LED indicators.
Rajah 1: Front Panel of Black Box LPH008A-R2 Switch.
This image displays the front panel of the Black Box LPH008A-R2 switch. It features eight 10/100/1000T RJ45 ports, numbered 1 through 8. Above the ports are LED indicators for P1, P2 (power inputs), and Fault. A green terminal block for power input is visible at the top.
4.2 Penunjuk LED
| Penunjuk | Status | Penerangan |
|---|---|---|
| P1 / P2 | Hidup (Hijau) | Power input 1 / Power input 2 is active. |
| Kesalahan | Hidup (Merah) | System fault detected. |
| Port LEDs (Green) | On | Link established at 1000 Mbps. |
| Berkelip | Data activity at 1000 Mbps. | |
| Port LEDs (Amber) | On | Link established at 10/100 Mbps. |
| Berkelip | Data activity at 10/100 Mbps. |
5. Persediaan dan Pemasangan
5.1 Sambungan Kuasa
- Pastikan sumber kuasa dimatikan sebelum menyambungkannya.
- Connect the 12-57 VDC power supply to the terminal block at the top of the switch. The switch supports dual power inputs (P1 and P2) for redundancy.
- Tighten the screws on the terminal block to secure the power wires.
- Turn on the power source. The P1 and/or P2 LED indicators should illuminate green.
5.2 Sambungan Rangkaian
- Connect standard RJ45 Ethernet cables from your network devices (e.g., computers, IP cameras, wireless access points) to any of the 8 RJ45 ports on the switch.
- For PoE-powered devices, ensure they are 802.3at compliant. The switch will automatically detect and provide power.
- Observe the port LEDs. A solid green or amber light indicates a successful link. Flashing indicates data activity.
5.3 Mounting (Optional)
The LPH008A-R2 is designed for industrial environments and can be DIN-rail mounted or wall-mounted. Refer to the specific mounting kit instructions for detailed steps.
6. Arahan Operasi
The Black Box LPH008A-R2 is an unmanaged switch, meaning it operates automatically without requiring configuration. Once powered on and connected, it will forward Ethernet traffic between connected devices.
- Naik Kuasa: After connecting power, the switch will initiate. The P1/P2 LEDs will light up.
- Penghantaran Data: Connect network devices to the RJ45 ports. The switch automatically detects link speed (10/100/1000 Mbps) and duplex mode.
- PoE+ Functionality: For PoE-enabled devices, the switch provides up to 30 watts per port, with a total power budget of 60 Watts (12-24 VDC input) or 120 Watts (24-57 VDC input).
7. Penyelenggaraan
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan bahagian luar suis. Jangan gunakan cecair atau pembersih aerosol.
- Pengudaraan: Ensure that the ventilation openings are clear of dust and debris to maintain proper airflow.
- Perisian tegar: Sebagai suis yang tidak diurus, kemas kini perisian tegar biasanya tidak diperlukan atau tersedia.
- Keadaan Persekitaran: Operate the switch within its specified temperature range (-40 to +75° C) and humidity levels.
8. Penyelesaian masalah
8.1 Tiada Kuasa
- Check if the power supply is correctly connected to the terminal block.
- Sahkan bahawa sumber kuasa aktif dan memberikan volum yang betultage (12-57 VDC).
- Ensure the P1/P2 LEDs are illuminated. If not, check the power supply and connections.
8.2 Tiada Pautan pada Port
- Pastikan kabel Ethernet disambungkan dengan selamat di kedua-dua hujungnya.
- Cuba kabel Ethernet yang berbeza.
- Connect a different device to the port to rule out issues with the connected device.
- Periksa status peranti yang disambungkan.
8.3 Peranti PoE Tidak Menerima Kuasa
- Verify that the connected device is PoE (802.3at) compliant.
- Pastikan jumlah bajet kuasa suis tidak melebihi had.
- Periksa kabel untuk kerosakan.
8.4 Fault LED is On
- A red Fault LED indicates a system error. Disconnect power, wait a few seconds, and reconnect.
- If the fault persists, contact technical support.
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | LPH008A-R2 |
| Bilangan Pelabuhan | 8 x 10/100/1000-Mbps RJ45 |
| Standard PoE | IEEE 802.3at (PoE+) |
| Output Kuasa PoE | Sehingga 30W setiap port |
| Jumlah Belanjawan Kuasa | 60W (12-24 VDC input), 120W (24-57 VDC input) |
| Input Voltage | Dual 12-57 VDC |
| Suhu Operasi | -40 hingga +75° C (-40 hingga +167° F) |
| Penilaian Kepungan | IP30 |
| Dimensi (LxWxH) | 1.61 x 3.74 x 5.67 inci (4.09 x 9.5 x 14.4 cm) |
| Berat badan | 1.8 paun (0.82 kg) |
| Bahan Kes | Tembaga |
10. Waranti dan Sokongan
Black Box products are designed for reliability and performance. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official Black Box webtapak.
For technical assistance or support, please contact Black Box customer service. Contact information can typically be found on the Black Box webtapak atau dalam dokumentasi produk anda.
Webtapak: www.blackbox.com