mcdodo KABLO

mcdodo Smart LED Auto Disconnect Nylon Braided Sync Charge USB Data Cable Instruction Manual

Model: KABLO | Brand: mcdodo

pengenalan

This manual provides essential information for the safe and efficient use of your mcdodo Smart LED Auto Disconnect Nylon Braided Sync Charge USB Data Cable. Please read these instructions carefully before using the product.

mcdodo Smart LED Auto Disconnect Cable connected to a phone, showing a green LED light

Image: The mcdodo Smart LED cable connected to a device, illustrating the LED indicator in green.

Ciri-ciri Produk

  • Smart Auto Disconnect: Features an integrated IC chip that senses the charging level and automatically stops power supply 20-30 minutes after the device is fully charged. This prevents overcharging, which can lead to battery degradation and overheating.
  • Petunjuk Status LED: The LED light on the connector indicates the charging status. It illuminates differently when charging and when fully charged.
  • Pembinaan Tahan Lama: Made with a nylon braided jacket and zinc alloy connectors for enhanced durability and protection against wear and tear.
  • Fast Charging & Data Transfer: High-quality four-core copper wires ensure efficient charging and high-speed data synchronization.
  • Keserasian: Designed for devices compatible with Lightning USB, including various iPhone and iPad models.

Persediaan

  1. Buka bungkus Kabel: Carefully remove the mcdodo Smart LED cable from its packaging.
  2. Sambungkan ke Sumber Kuasa: Insert the USB Type-A end of the cable into a compatible USB wall adapter, power bank, or computer USB port.
  3. Sambung ke Peranti: Insert the Lightning connector end into your compatible Apple device (iPhone, iPad, iPod).
  4. Sahkan Sambungan: The LED indicator on the Lightning connector will illuminate to show that the device is connected and charging.
Close-up of mcdodo Smart LED cable Lightning connector with green LED light

Imej: Dari dekat view of the mcdodo Smart LED cable's Lightning connector, highlighting the green LED indicator.

Arahan Operasi

Mengecas Peranti Anda

Once connected, the cable will begin charging your device. The LED indicator will show the charging status:

  • mengecas: The LED will display a specific color (e.g., red or pulsing light) indicating active charging.
  • Dicas Penuh: Approximately 20-30 minutes after your device reaches 100% battery, the cable's smart chip will automatically cut off power, and the LED indicator will change to a different color (e.g., green or off) to signify that charging has stopped.

Note: The auto-disconnect feature will not activate if you are actively using your phone while it is charging.

Pemindahan Data

To transfer data, connect the USB Type-A end to a computer and the Lightning end to your device. Your device should prompt you to trust the computer, allowing for data synchronization.

Video: Demonstration of the mcdodo Smart LED cable's auto-disconnect feature and LED indicator functionality.

Penyelenggaraan

  • Pembersihan: Use a soft, dry cloth to clean the cable and connectors. Avoid using liquid cleaners or abrasive materials.
  • Storan: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Use the included plastic tie (if applicable) to keep the cable neatly coiled.
  • Pengendalian: Avoid sharp bends, twists, or excessive pulling on the cable, especially near the connectors, to prevent internal damage.
Two mcdodo Smart LED cables, one with Lightning connector and one with USB-A connector

Imej: A view of both ends of the mcdodo Smart LED cable, showing the Lightning and USB-A connectors.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Cable not charging device.Loose connection, faulty power source, damaged cable.Ensure both ends are securely connected. Try a different USB port or power adapter. Inspect the cable for visible damage.
Penunjuk LED tidak menyala.No power, device not connected, cable malfunction.Check power source and device connection. If still no light, the cable may be faulty.
Auto-disconnect not working.Device in active use during charging, software issue.Ensure the device is idle after reaching full charge. Restart your device.
Slow charging or data transfer.Low-power USB port, background apps, cable damage.Use a high-power USB adapter. Close unnecessary apps. Check cable for damage.

Spesifikasi

  • Jenama: mcdodo
  • model: KABLO
  • Jenis Penyambung: USB Type A to Lightning
  • Jenis Kabel: USB
  • Panjang: 4FT / 1.2M
  • Bahan: Nylon Braided (outer), Zinc Alloy (connectors), Copper (wires)
  • Ciri Khas: Auto Disconnect, LED Indicator, Data Transfer
  • Vol Maksimumtage: 5 Volt (DC)
  • Peranti Serasi: iPhone 14/13 Pro Max/12/11/XS Max/XS/8/7/6s/6/5s/5c/5, iPad Pro/Air 2/mini 4, iPod (and other compatible Apple devices)

Waranti dan Sokongan

For warranty information and customer support, please refer to the official mcdodo weblaman web atau hubungi peruncit tempat anda membeli produk tersebut. Simpan bukti pembelian anda untuk tuntutan jaminan.

Pengeluar: mcdodo

Penjual: SNT-Brilliance

© 2023 mcdodo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.