pengenalan
Thank you for choosing the Orbit 6-Station Easy Dial Sprinkler Timer. This manual provides detailed instructions for the proper installation, programming, and maintenance of your new irrigation controller. Designed for ease of use, this timer helps you manage your watering schedules efficiently, ensuring your landscape receives optimal hydration while conserving water.
Please read this manual thoroughly before operating the timer to ensure correct setup and to maximize its features.
Rajah 1: Depan view of the Orbit 6-Station Easy Dial Sprinkler Timer, showing the large LCD screen and programming dial.
Maklumat Keselamatan Penting
- Sentiasa putuskan bekalan elektrik sebelum melakukan sebarang pendawaian atau penyelenggaraan.
- Do not install the timer in direct sunlight or in areas exposed to extreme temperatures.
- Pastikan semua sambungan elektrik kukuh dan dilindungi daripada kelembapan.
- This device is intended for outdoor use with irrigation systems only.
- Jauhkan daripada kanak-kanak.
Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- Orbit 6-Station Easy Dial Sprinkler Timer Unit
- Perkakasan Pemasangan (skru dan sauh dinding)
- Manual Pengguna (dokumen ini)
Persediaan dan Pemasangan
1. Mounting the Timer
- Choose a suitable location near an electrical outlet and away from direct sunlight or extreme weather.
- Use the provided mounting hardware to secure the timer to a wall or sturdy surface. Ensure it is level.
2. Wiring the Valves
Each irrigation valve has two wires. One wire from each valve connects to the common wire, and the other connects to a specific station terminal on the timer.
- Connect the common wire from your valves to the terminal labeled "COMMON" or "C" on the timer.
- Connect the remaining wire from each valve to its corresponding station terminal (e.g., Valve 1 to Station 1, Valve 2 to Station 2, etc.). The Orbit 6-Station timer supports up to six individual zones.
3. Kuasa Penyambung
Plug the timer's power adapter into a standard electrical outlet. The LCD screen should illuminate, indicating power is supplied.
Arahan Operasi
The Easy Dial interface allows for intuitive programming. Rotate the dial to select different programming modes.
1. Setting Current Time and Date
- Putar dail ke TETAPKAN JAM.
- Gunakan +/- butang untuk melaraskan jam, kemudian tekan SETERUSNYA to move to minutes, and then to AM/PM.
- Tekan SETERUSNYA to set the current year, month, and day using the +/- butang.
2. Programming Watering Schedules (Programs A and B)
The timer offers two independent programs, A and B, allowing for different watering schedules for various zones or plant types.
- Putar dail ke PROGRAM A or PROGRAM B.
- Tetapkan Masa Mula: Tekan SETERUSNYA to cycle through up to four start times per program. Use +/- to adjust. Set unused start times to OFF.
- Tetapkan Masa Larian: Tekan SETERUSNYA. For each station (1-6), use +/- to set the watering duration from 1 minute to 240 minutes. Press SETERUSNYA to move to the next station.
- Tetapkan Hari Penyiraman: Tekan SETERUSNYA. guna +/- to select specific days of the week, or choose an interval (e.g., every 2nd day).
3. Smart Budgeting / Seasonal Adjust
This feature allows you to adjust all station run times in a program by a percentage, useful for seasonal changes without reprogramming each station individually.
- Putar dail ke BAJET.
- Gunakan +/- buttons to adjust the watering percentage from 10% to 200%. 100% is the programmed run time.
4. Penyiraman Manual
To water manually outside of programmed schedules:
- Putar dail ke MANUAL.
- guna +/- to select the station you wish to water and set its duration.
- Tekan MULAKAN to begin manual watering. The timer will automatically return to the AUTO position after manual watering is complete.
5. Rain Delay
Temporarily suspend watering for a set period due to rain or other reasons.
- Putar dail ke KELEWATAN HUJAN.
- guna +/- to select the number of days (24, 48, or 72 hours) you wish to delay watering.
- The timer will resume its programmed schedule automatically after the delay period.
Penyelenggaraan
1. Pembersihan
Wipe the timer's exterior with a damp kain. Jangan gunakan pembersih yang melelas atau rendam unit di dalam air.
2. Battery Backup (if applicable)
Some models may include a battery compartment for program backup during power outages. If your model has this feature, replace batteries annually or when the low battery indicator appears. Refer to the battery compartment for specific battery type (e.g., 2 x AA batteries).
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan pemasa kosong. | Tiada kuasa atau kuasa outage. | Check power connection. Ensure outlet is functional. If applicable, check battery backup. |
| Pemercik tidak menyala. | Timer not in AUTO mode, valves off, wiring issue, or low water pressure. | Ensure dial is set to AUTO. Check that water supply valves are open. Inspect wiring connections. Verify water pressure. |
| Timer waters at incorrect times. | Incorrect time/date setting or programming error. | Sahkan masa dan tarikh semasa.view masa mula program, masa larian dan hari penyiraman. |
| One station does not water. | Faulty valve, wiring issue for that station, or station not programmed. | Check wiring for the specific station. Manually test the valve. Ensure the station has a run time programmed. |
Spesifikasi
- model: 57596
- Jenama: Orbit
- Bilangan Stesen: 6
- Bahan: plastik
- Berat: Kira-kira 1.3 paun (0.59 kg)
- Input Kuasa: Standard AC (refer to power adapter for specific voltage)
- UPC: 816602024845
Maklumat Waranti
Orbit products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
Sokongan Pelanggan
If you have any questions or require assistance with your Orbit 6-Station Easy Dial Sprinkler Timer, please contact Orbit customer support. Contact information can typically be found on the product packaging or the official Orbit webtapak.