Kohler 76331-CP Shower Arm with 2-Way Diverter Instruction Manual

1. Produk Lebihview

The Kohler 76331-CP Shower Arm with 2-Way Diverter is a wall-mount fixture designed to direct water flow between a showerhead and a handshower. Constructed from brass, this unit features a polished chrome finish, engineered to resist corrosion and tarnishing. It includes a flange for installation and is compatible with standard 1/2-inch NPT connections.

Image 1.1: The Kohler 76331-CP Shower Arm with 2-Way Diverter, showcasing its polished chrome finish and integrated diverter mechanism.

2. Maklumat Keselamatan

• Sentiasa matikan bekalan air utama sebelum memulakan sebarang pemasangan atau penyelenggaraan.
• Pakai peralatan perlindungan diri yang sesuai, seperti cermin mata keselamatan dan sarung tangan.
• Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, berunding dengan tukang paip yang berkelayakan.
• Pastikan semua sambungan selamat untuk mengelakkan kebocoran.
• Jangan terlalu ketatkan sambungan, kerana ini boleh merosakkan produk atau paip.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan.

• Shower Arm with 2-Way Diverter
• Bebibir

Note: Showerheads, handshowers, and additional flanges (K-76334 Traditional flange, K-76335 Square flange) are sold separately.

4. Spesifikasi

5. Arahan Pemasangan

5.1 Tools and Materials Required (Not Included)

• Sepana boleh laras
• Pita tukang paip (pengedap benang)
• Kain lembut

5.2 Langkah Pemasangan

1. Matikan Bekalan Air: Locate and turn off the main water supply to your shower area. Open existing shower faucets to relieve pressure.
2. Remove Existing Shower Arm (if applicable): Unscrew the existing shower arm from the wall fitting. Clean any old sealant or debris from the wall pipe threads.
3. Prepare New Shower Arm: Apply plumber's tape clockwise around the threaded end of the new Kohler shower arm (the end that connects to the wall). Ensure several wraps for a watertight seal.
4. Install Flange: Slide the decorative flange over the shower arm, ensuring it faces the wall.
5. Attach Shower Arm to Wall: Carefully thread the shower arm into the 1/2-inch NPT wall fitting. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/2 to 1 full turn until secure and properly oriented. Do not overtighten.
6. Position Flange: Slide the flange flush against the wall to cover the opening.
7. Install Showerhead and Handshower: Attach your desired showerhead to the top outlet and your handshower hose to the bottom outlet of the diverter. Apply plumber's tape to these connections as well.
8. Ujian untuk Kebocoran: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, turn off water, tighten connections slightly, and re-test.

6. Arahan Operasi

The 2-way diverter allows you to easily switch water flow between your main showerhead and a connected handshower.

• To use the Showerhead: Ensure the diverter handle is in the position that directs water upwards to the showerhead.
• To use the Handshower: Rotate the diverter handle to the position that directs water downwards to the handshower.
• To turn off water: Use your shower's main faucet handle to stop the water flow. The diverter only controls the direction of water, not the on/off function or temperature.

7. Penyelenggaraan dan Penjagaan

• Pembersihan: Bersihkan kemasan krom yang digilap dengan lembut, damp kain. Elakkan pembersih yang melelas, bahan kimia yang keras, atau pad penyental, kerana ini boleh merosakkan kemasan.
• Pembersihan Tempat: For water spots, use a mild soap solution and rinse thoroughly with clean water, then dry with a soft cloth.
• Pemeriksaan Berkala: Periodically check connections for any signs of leaks or corrosion.

8. Penyelesaian masalah

9. Waranti dan Sokongan

For specific warranty information and customer support, please refer to the official Kohler website or contact Kohler directly. Keep your purchase receipt for warranty claims.

Kohler Official Webtapak: www.kohler.com