Atlanta 1882-7
Atlanta 1882-7 Digital Radio Alarm Clock User Manual
Model: 1882-7
pengenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your Atlanta 1882-7 Digital Radio Alarm Clock. This device features an LCD display, radio-controlled time synchronization, alarm with snooze function, date display, and temperature measurement. Please read this manual thoroughly before use to ensure proper functionality and longevity of your alarm clock.
Produk Selesaiview
The Atlanta 1882-7 is a compact and user-friendly digital alarm clock designed for reliability and convenience. Its radio-controlled feature ensures accurate timekeeping, automatically adjusting for daylight saving time. The clear LCD provides essential information at a glance.
Rajah 1: Depan view of the Atlanta 1882-7 Digital Radio Alarm Clock. The display shows the current time, date, and ambient temperature. A red 'ALARM ON/OFF' button is visible on top, along with 'TIME', 'ALARM', '+' and '-' buttons on the front panel below the display.
Ciri-ciri
- LCD radio alarm clock with clear digital display.
- Red top stop button for alarm control.
- Blue dial light activated by touching the top of the case (sensor touch).
- Display of current date and ambient temperature.
- Alarm repeat function (snooze function).
- Antara muka yang mudah digunakan.
- Compact dimensions: approximately 8 x 8 cm.
Persediaan
1. Pemasangan Bateri
- Cari petak bateri di bahagian belakang jam loceng.
- Buka penutup petak bateri.
- Insert the required batteries (typically 2x AAA, not included) according to the polarity indicators (+ and -) inside the compartment.
- Tutup penutup petak bateri dengan selamat.
2. Initial Power-On and Radio Synchronization
Upon battery installation, the alarm clock will power on and automatically begin searching for the radio time signal. This process may take several minutes. During synchronization, a radio signal icon (often resembling a radio tower or waves) will typically flash on the display. Once synchronized, the icon will become steady, and the correct time, date, and temperature will be displayed.
- Place the alarm clock in an area with good radio signal reception, away from electronic devices that may cause interference.
- Allow the clock to complete its initial synchronization.
- If synchronization fails, try repositioning the clock or manually setting the time (refer to "Setting Time Manually" in the Operating Instructions).
Arahan Operasi
1. Setting Time Manually (If Radio Signal is Unavailable)
- Tekan dan tahan butang MASA butang sehingga paparan masa mula berkelip.
- Gunakan + dan - butang untuk melaraskan jam.
- Tekan ke MASA button again to confirm the hour and move to minutes adjustment.
- Gunakan + dan - butang untuk melaraskan minit.
- Tekan ke MASA button once more to save the settings and exit time setting mode.
2. Menetapkan Penggera
- Tekan dan tahan butang PENGGERA button until the alarm time display starts flashing.
- Gunakan + dan - butang untuk melaraskan jam penggera.
- Tekan ke PENGGERA button again to confirm the hour and move to alarm minutes adjustment.
- Gunakan + dan - butang untuk melaraskan minit penggera.
- Tekan ke PENGGERA button once more to save the alarm setting.
3. Mengaktifkan/Menyahaktifkan Penggera
To turn the alarm on or off, press the red ALARM ON / OFF button located on the top of the clock. An alarm icon will appear on the display when the alarm is active.
4. Fungsi Tunda
When the alarm sounds, touch the top of the clock (the sensor touch area) or press the red ALARM ON / OFF button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes, specific duration may vary and is usually fixed). The blue dial light will also activate upon touch.
5. Menghentikan Penggera
To completely stop the alarm for the day, press any button other than the snooze/top touch area, or press the PENGGERA button on the front panel. The alarm icon will remain on the display, indicating it is set for the next day.
6. Display Light
Touch the top of the clock to activate the blue backlight for a few seconds, allowing for easy viewdalam keadaan cahaya rendah.
7. Viewing Date and Temperature
The date and temperature are continuously displayed on the LCD screen below the main time display.
Penyelenggaraan
1. Pembersihan
Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing atau paparan.
2. Penggantian Bateri
When the display dims or the clock functions become erratic, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Dispose of used batteries responsibly.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan jam kosong atau malap. | Bateri rendah atau kehabisan bateri. | Replace batteries with new ones. Ensure correct polarity. |
| Masa tidak betul atau tidak disegerakkan. | Poor radio signal reception; interference. | Move the clock to a different location, away from other electronics. Allow time for re-synchronization. Manually set time if necessary. |
| Penggera tidak berbunyi. | Penggera tidak diaktifkan; masa penggera tidak betul. | Ensure the red ALARM ON/OFF button is pressed (alarm icon visible). Verify the alarm time setting. |
| Fungsi tunda tidak berfungsi. | Incorrect activation method. | Ensure you are touching the top sensor area or pressing the red ALARM ON/OFF button when the alarm sounds. |
Spesifikasi
- model: Atlanta 1882-7
- Jenis: Jam Penggera Radio Digital
- paparan: LCD
- warna: Hitam
- Bahan: Akrilonitril Butadiena Stirena (Plastik)
- Dimensi: Kira-kira 8 x 8 cm
- Berat Barang: Lebih kurang 65 Gram
- Sumber Kuasa: Dikuasakan Bateri
- Bateri Diperlukan: Yes (Type not specified, commonly AAA)
- Ciri Khas: Snooze, Temperature Display, Date Display, Blue Backlight (Sensor Touch)
- Jenis Pemasangan: Atas meja