Movo RBS1 V-Mount Battery Plate Instruction Manual

pengenalan

This manual provides detailed instructions for the safe and effective use of your Movo RBS1 V-Mount Battery Plate. Please read this manual thoroughly before operation and retain it for future reference.

Maklumat Keselamatan

• Ensure the V-Mount battery (not included) is securely attached before use.
• Sahkan voltage output for each connected device to prevent damage.
• Jangan dedahkan unit kepada kelembapan atau suhu yang melampau.
• Avoid disassembling the unit; refer servicing to qualified personnel.
• Jauhkan daripada kanak-kanak.

Kandungan Pakej

• Movo RBS1 V-Mount Battery Plate with 15mm Rod Mount
• 7 Output Cables: 5V (for Microphones), 5V (for Audio Adapters/Dividers), 7.2V (for Canon 5D), 8.4V (for Cameras), 9V (for LED Lights), 12V (for LCD Monitors), and Dummy LP-E6 Output Adapter.

Ciri-ciri Produk

• 15mm Rod Mount for V-Mount Batteries.
• Berbilang Voltage Outputs: 5V, 7.2V, 8.4V, 9V, 12V, 14.8V.
• Includes LP-E6 Dummy Battery Adapter.
• Six simultaneous voltage outputs with voltage perlindungan.
• Designed to power various accessories on a camera rig.

Persediaan

1. Attach to Rod System: Secure the Movo RBS1 V-Mount Battery Plate to your camera rig's 15mm rod system using the integrated rod mount. Tighten the knobs to ensure stability.
   

   Image shows the Movo RBS1 V-Mount Battery Plate attached to a 15mm rod system on a camera rig.

2. Mount V-Mount Battery: Slide a compatible V-Mount battery (not included) onto the V-Mount plate until it clicks securely into place.
   

   Image displays the Movo RBS1 V-Mount Battery Plate, ready for a V-Mount battery to be attached.
3. Sambungkan Kabel Kuasa: Identify the appropriate output cable for each accessory (e.g., 5V for microphones, 12V for LCD monitors, 8.4V for cameras, LP-E6 for compatible cameras).
   

   Image illustrates a V-Mount battery connected to the plate, with various power cables plugged into the output ports.

4. Sambung Aksesori: Plug the other end of each power cable into its respective accessory.
   

   Image shows the Movo RBS1 V-Mount Battery Plate powering multiple camera accessories via its various output ports.

Arahan Operasi

Once the V-Mount battery is attached and accessories are connected, the Movo RBS1 will automatically provide power to your devices. No additional power switch is typically required for basic operation.

Voltage Hasil

• Output 5V: For microphones and audio adapters/dividers.
• Output 7.2V: Specifically for Canon 5D cameras.
• Output 8.4V: For general cameras.
• Output 9V: For LED lights.
• Output 12V: For LCD monitors.
• Output 14.8V: Main V-Mount battery output.
• LP-E6 Dummy Battery: For cameras compatible with LP-E6 batteries.

Close-up image of the Movo RBS1 V-Mount Battery Plate highlighting the various DC output ports and their corresponding voltage labels.

Penyelenggaraan

• Regularly inspect all cables and connections for wear or damage.
• Pastikan unit bersih dan bebas daripada habuk dan serpihan. Gunakan kain lembut dan kering untuk pembersihan.
• Simpan unit di tempat yang sejuk dan kering apabila tidak digunakan.

Menyelesaikan masalah

Tiada Output Kuasa

• Ensure the V-Mount battery is fully charged and securely attached to the plate.
• Periksa semua sambungan kabel untuk tempat duduk yang betul.
• Verify that the connected device is compatible with the selected voltagkeluaran e.

Loose Rod Mount

• Tighten the rod mount knobs firmly to secure the plate to the 15mm rods.

Spesifikasi

Waranti dan Sokongan

The Movo RBS1 V-Mount Battery Plate comes with a 1-YEAR WARRANTY. For technical assistance or warranty claims, please contact Movo's US-Based support team. Refer to the official Movo weblaman web untuk maklumat hubungan.