VOX BC108 Black Cab Series AmpKabinet penguat

1. Pengenalan

The VOX BC108 Black Cab Series Amplifier Cabinet is a compact and portable speaker cabinet designed to deliver quality sound for guitar amplification. Featuring an 8-inch speaker and 25 Watts of power handling, it is ideal for practice, studio use, and small venues. This manual provides essential information for the safe and effective use of your BC108 cabinet, ensuring optimal performance and longevity.

Rajah 1: Depan view of the VOX BC108 Amplifier Cabinet.

2. Langkah-langkah Keselamatan

To prevent electric shock, fire, or damage to the unit, please read and follow all instructions carefully.

• Sumber Kuasa: This cabinet is passive and does not require direct power. Ensure any connected amplifier is properly grounded and uses the correct voltage.
• Pengudaraan: Do not block any ventilation openings. Ensure adequate airflow around the cabinet.
• Air dan Kelembapan: Jangan dedahkan unit ini kepada hujan, kelembapan atau kelembapan berlebihan. Jangan letakkan objek yang berisi cecair di atas atau berhampiran unit ini.
• haba: Jauhkan unit daripada sumber haba seperti radiator, daftar haba, dapur, atau radas lain yang menghasilkan haba.
• Pembersihan: Bersihkan hanya dengan kain kering. Jangan gunakan pembersih cecair atau pembersih aerosol.
• Servis: Jangan cuba servis produk ini sendiri. Rujuk semua perkhidmatan kepada pegawai perkhidmatan yang berkelayakan.
• penempatan: Place the cabinet on a stable, level surface to prevent it from falling.
• Kabel Pembesar Suara: Use high-quality speaker cables with appropriate gauge for connections to prevent signal loss or damage.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• VOX BC108 AmpKabinet penguat
• Speaker Cable (may vary by region/retailer)
• Manual Arahan (dokumen ini)

4. Persediaan

Follow these steps to set up your VOX BC108 amplifier cabinet:

1. penempatan: Position the BC108 cabinet on a stable surface. For optimal sound projection, consider placing it on the floor or on a sturdy stand.
2. Menyambung ke an Amplifier Head:

   Locate the speaker output jack on your amplifier head and one of the input jacks on the rear of the BC108 cabinet. Use a high-quality speaker cable to connect these two points. Ensure both the amplifier and the cabinet are powered off before making connections.

   

   Figure 2: The BC108 cabinet paired with an MV50 ampkepala penguat.

   

   Figure 3: Rear panel of the BC108, illustrating the parallel speaker jacks.

3. Padanan Impedans: The BC108 has an impedance of 8 Ohms. Ensure your amplifier head's output impedance setting matches or is compatible with the cabinet's impedance to prevent damage to your amplebih hidup.
4. Parallel Speaker Jacks: The BC108 features two parallel speaker jacks. One jack serves as the input from your amplifier, and the other can be used to connect an additional speaker cabinet in parallel. When connecting two 8-Ohm cabinets in parallel, the total impedance presented to the amplifier will be 4 Ohms. Ensure your amplifier can safely operate at this lower impedance.

5. Operasi

The BC108 is a passive speaker cabinet and its operation is directly controlled by the connected ampkepala penguat.

• Hidupkan/Mati Kuasa: Hidupkan anda amplifier head after all connections are securely made. Turn off the amplifier head before disconnecting any cables.
• Kawalan Kelantangan: Adjust the volume and tone settings directly on your ampkepala penguat.
• Daisy-Chaining (Connecting Multiple Cabinets): If you wish to connect a second 8-Ohm cabinet, use a speaker cable to connect the second parallel jack on the BC108 to the input of the additional cabinet. Remember that this configuration will result in a 4-Ohm load for your amplebih hidup.


Figure 4: Two BC108 cabinets stacked, demonstrating a potential multi-cabinet setup.

6. Penyelenggaraan

Proper maintenance ensures the longevity and performance of your BC108 cabinet.

• Pembersihan: Wipe the exterior of the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Storan: When not in use for extended periods, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
• Pemeriksaan: Periodically check speaker cables for any signs of wear or damage. Replace damaged cables immediately.

7. Penyelesaian masalah

If you encounter issues with your BC108 cabinet, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact VOX customer support or a qualified service technician.

8. Spesifikasi

9. Maklumat Waranti

The VOX BC108 Amplifier Cabinet comes with a Waranti terhad 1 tahun from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VOX webtapak.

10. Sokongan Pelanggan

If you have any questions, require technical assistance, or need to arrange for service, please contact VOX customer support:

• Webtapak: Visit the official VOX webtapak untuk Soalan Lazim, sumber sokongan dan maklumat hubungan.
• Hubungi: Refer to the contact section on the VOX weblaman web untuk nombor telefon atau sokongan e-mel.
• Peniaga: Contact your authorized VOX dealer for local support and service options.