1. Pengenalan
This manual provides essential instructions for the safe installation, operation, and maintenance of your ALEKO TOULE NTSA45 Sauna Spa Heater Stove. This ETL certified wet and dry electric sauna heater is designed for reliability and efficiency in small to medium-sized sauna rooms. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Maklumat Keselamatan
Your safety is paramount. Adhere to all warnings and instructions to prevent electric shock, fire, or injury.
- Pemasangan Elektrik: All electrical connections must be performed by a qualified, licensed electrician in accordance with national and local electrical codes. Incorrect wiring can lead to severe injury or fire.
- Air dan Haba: This heater is designed for both wet and dry sauna use. However, avoid pouring excessive water directly onto the heating elements. Only use water on the sauna stones.
- Permukaan Panas: The heater and sauna stones become extremely hot during operation. Avoid direct contact to prevent burns. Install a protective wooden guard if necessary.
- Pengudaraan: Ensure adequate ventilation in the sauna room as specified by sauna construction guidelines.
- Bahan mudah terbakar: Keep all flammable materials away from the heater. Do not dry clothes or other items on the heater.
- Kanak-kanak dan Haiwan Kesayangan: Jauhkan kanak-kanak dan haiwan peliharaan daripada pemanas sauna semasa operasi.

3. Kandungan Pakej
Selepas membongkar, sahkan bahawa semua komponen ada dan tidak rosak:
- ALEKO TOULE NTSA45 Sauna Heater Unit
- NTS-100 Digital Wall-Mounted Controller
- Penderia Suhu
- Perkakasan Pemasangan (skru, kurungan)
- Manual Pengguna (dokumen ini)
Note: Sauna stones are typically sold separately and are not included with the heater unit.
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | NTSA45 |
| Output Kuasa | 4.5 kW |
| Voltage | 220-240 Volt |
| Phase Wiring | 2 Fasa |
| Kekerapan | 60Hz |
| Dimensi Produk | 29 x 19 x 13 inci (L x P x H) |
| Berat Barang | 27 paun |
| Pensijilan | ETL, CE |
| Jenis Pengawal | NTS-100 Digital Wall Controller |
5. Persediaan dan Pemasangan
Proper installation is crucial for safety and performance. It is highly recommended that a qualified electrician handles the electrical wiring.
5.1 Memilih Lokasi
Install the heater on a non-combustible wall surface within the sauna room. Ensure sufficient clearance from walls and benches as per local building codes and the heater's specific requirements. The heater should be positioned to allow for even heat distribution.
5.2 Memasang Pemanas
- Secure the mounting bracket to the sauna wall using appropriate fasteners.
- Carefully lift the heater unit and hang it onto the mounted bracket, ensuring it is stable and level.

5.3 Sambungan Elektrik
WARNING: This step must be performed by a licensed electrician.
- Connect the heater to a dedicated 220-240V, 2-phase, 60Hz electrical circuit with appropriate amperage and circuit breaker protection.
- Follow the wiring diagram provided with the heater and controller for correct connections.
- Pastikan semua sambungan ketat dan berpenebat.
5.4 Meletakkan Batu Sauna
Arrange sauna stones (not included) in the stone compartment of the heater. Ensure good air circulation between the stones. Do not pack them too tightly. Use only genuine sauna stones designed for electric heaters.


5.5 Installing the Digital Controller (NTS-100)
Mount the NTS-100 digital controller on an exterior wall outside the sauna room, at a convenient height. Connect the controller to the heater and temperature sensor according to the wiring diagram. The controller allows for easy temperature and time adjustments.
6. Arahan Operasi
The NTS-100 digital controller provides intuitive control over your sauna heater.
6.1 Permulaan Permulaan
- After installation, turn on the main power supply to the sauna heater.
- The digital controller display will illuminate.
- For the first use, operate the heater for 30-60 minutes without water to burn off any manufacturing residues. Ensure good ventilation during this period.
6.2 Using the NTS-100 Digital Controller

- Hidupkan/Mati Kuasa: Press the power button to activate or deactivate the heater.
- Tetapan Suhu: Use the up/down arrows to adjust the desired sauna temperature. The display will show the set temperature and the current sauna temperature.
- Tetapan Pemasa: Press the timer button to set the operating duration. The heater will automatically shut off after the set time.
- Pre-set Time: Some controllers allow for a delayed start. Consult the controller's specific instructions for this feature.
6.3 Wet vs. Dry Sauna Use
- Dry Sauna: Operate the heater without pouring water on the stones. This provides a dry heat experience.
- Wet Sauna: For a wet sauna experience, carefully ladle small amounts of water onto the hot sauna stones. This creates steam and increases humidity. Do not pour large quantities of water at once.
7. Penyelenggaraan
Regular maintenance ensures the longevity and safe operation of your sauna heater.
7.1 Membersihkan Pemanas
- Ensure the heater is completely cool and disconnected from power before cleaning.
- Wipe the exterior stainless steel surfaces with a damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Remove any debris from the stone compartment.
7.2 Sauna Stone Inspection and Replacement
- Periodically inspect the sauna stones for signs of crumbling or deterioration. Over time, stones can break down due to repeated heating and cooling cycles.
- Replace any broken or worn-out stones to maintain optimal heat transfer and prevent damage to the heating elements.
- Rearrange stones annually to ensure good air circulation.
8. Penyelesaian masalah
If you encounter issues with your sauna heater, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pemanas tidak dihidupkan. | No power supply; circuit breaker tripped; faulty wiring; controller issue. | Check main power supply and circuit breaker. Verify controller connections. If issues persist, contact a licensed electrician. |
| Heater turns on but does not heat. | Faulty heating element; incorrect temperature setting; sensor issue. | Ensure desired temperature is set higher than current room temperature. Check sensor connection. If elements are faulty, professional repair is needed. |
| Sauna tidak mencapai suhu yang diingini. | Insufficient heating time; poor insulation; incorrect stone placement; undersized heater for room. | Allow more time for heating. Check sauna room insulation. Rearrange stones for better airflow. Ensure heater power matches sauna volume. |
| Controller display is blank or erratic. | Power issue to controller; loose connection; controller malfunction. | Check power to the controller. Verify cable connections. If malfunction persists, contact support. |
For complex electrical issues or internal component failures, always consult a qualified technician or the manufacturer's support.
9. Waranti dan Sokongan
Your ALEKO TOULE NTSA45 Sauna Heater is backed by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact ALEKO customer support. Keep your purchase receipt as proof of purchase for warranty claims.
Maklumat Hubungan: Refer to the ALEKO official website or your purchase documentation for the most current customer support contact details.