Encik Beams MBN3000

Mr Beams MBN3000 Netbright 500 Lumen Wireless Motion Sensing LED Dual Head Security Spotlight

Model: MBN3000 | Brand: Mr Beams

pengenalan

This manual provides essential information for the safe and effective use of your Mr Beams MBN3000 Netbright 500 Lumen Wireless Battery Powered Motion Sensing LED Dual Head Security Spotlight. Please read these instructions thoroughly before installation and operation, and retain them for future reference.

Mr Beams MBN3000 Netbright LED Security Spotlight illuminating a dark outdoor area.

The Mr Beams MBN3000 Netbright LED Security Spotlight is shown in action, brightly illuminating a dark outdoor space, emphasizing its security and visibility benefits.

Maklumat Keselamatan

  • Always use the specified battery type (4 D batteries).
  • Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
  • Pastikan bateri dimasukkan dengan polariti yang betul (+/-).
  • Buang bateri terpakai dengan betul mengikut peraturan tempatan.
  • Do not submerge the unit in water. It is weather-resistant, not waterproof.
  • Avoid looking directly into the LED lights when illuminated, as this may cause temporary vision impairment.
  • Mount the light securely to prevent it from falling.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

  • 1 x Mr Beams MBN3000 Netbright 500 Lumen Dual Head Security Spotlight
  • 1 x Kurungan Pemasangan
  • Installation Hardware (screws and anchors)
  • Manual Pengguna (dokumen ini)

Note: 4 D batteries are required and not included.

Persediaan

1. Pemasangan Bateri

Untuk memasang bateri:

  1. Locate the battery compartment on the back of the spotlight unit.
  2. Tanggalkan skru yang menahan penutup petak bateri.
  3. Gently pull the cover from both sides to release it.
  4. Insert 4 D-cell batteries, ensuring correct polarity.
  5. Gantikan penutup petak bateri dan kencangkannya dengan skru.

2. Mounting the Spotlight

The Mr Beams MBN3000 is designed for easy, wireless installation. Choose a location that provides optimal light coverage and motion detection, such as garages, doorways, sheds, or fences.

  1. Position the mounting bracket at your desired location.
  2. Mark the screw holes on the mounting surface.
  3. Gerudi lubang pandu jika perlu, kemudian selamatkan pendakap pelekap menggunakan skru dan penambat yang disediakan.
  4. Align the spotlight unit with the mounted bracket and slide it into place until it clicks securely.
Mr Beams MBN3000 Netbright LED Security Spotlight installed on a house siding, illuminating the area.

The Mr Beams MBN3000 Netbright LED Security Spotlight is shown installed on the exterior siding of a house, demonstrating its effective illumination of the surrounding area.

Mr Beams MBN3000 Netbright LED Security Spotlight mounted on a tree trunk, providing light to a backyard.

This image illustrates the versatility of the Mr Beams MBN3000 Netbright LED Security Spotlight, mounted on a tree trunk to light up a section of a backyard.

Installation and Battery Guide Video

This video demonstrates the installation process for the Mr Beams MBN3000 Netbright LED Security Spotlight, including battery insertion and mounting the unit to a surface. It also highlights the light's brightness and adjustable features.

Arahan Operasi

Motion Sensing Activation

The Mr Beams MBN3000 spotlight features a motion sensor that automatically turns the light on when motion is detected within its range. The light will remain on for approximately 20 seconds after motion stops.

  • Sudut Pengesanan Gerakan: 120 darjah
  • Julat Pengesanan: Sehingga 25 kaki

You can customize the light coverage area by adjusting the two heads, which pivot 180 degrees up and down and 135 degrees side to side.

NetBright Technology

The NetBright technology allows multiple Mr Beams NetBright lights to communicate wirelessly. When one NetBright light detects motion, all other lights on the same network will also activate, providing a wider and more comprehensive lighting solution.

  • Create up to 4 zones with up to 50 lights on each network.
  • Ensure lights are within 150 feet of each other for optimal communication.

Penyelenggaraan

  • Pembersihan: Lap unit dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
  • Penggantian Bateri: Replace all 4 D batteries when the light output diminishes or the unit stops activating. Follow the battery installation steps outlined in the Setup section.
  • Pemeriksaan: Periodically check the mounting for security and ensure the motion sensor is clear of obstructions.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Cahaya tidak menyala.Bateri mati atau tidak dipasang dengan betul.Check battery polarity and replace all 4 D batteries.
Lampu sentiasa menyala.Gerakan berterusan dalam zon pengesanan.Adjust the light's position or the motion sensor's angle to avoid constant triggers.
Light flashes or is dim.Kuasa bateri rendah.Replace all 4 D batteries.
NetBright lights not synchronizing.Lights are out of range or on different networks.Ensure lights are within 150 feet of each other and set to the same network zone.

Spesifikasi

  • Jenama: Encik Beams
  • Nombor Model: MBN3000-WHT-01-00
  • Output Cahaya: 500 Lumen
  • Sumber Kuasa: Bateri 4D (tidak termasuk)
  • Jenis Pemasangan: Lekap di dinding
  • Sudut Pengesanan Gerakan: 120 darjah
  • Julat Pengesanan Pergerakan: Sehingga 25 kaki
  • Kepala boleh laras: 180 degrees up/down, 135 degrees side/side
  • NetBright Technology: Yes, up to 4 zones, 50 lights per zone
  • Berat Barang: 0.86 paun
  • warna: putih

Waranti dan Sokongan

This Mr Beams product comes with a Waranti terhad 1 tahun from the date of purchase. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Mr Beams webtapak.

Register your product on the Mr Beams website to potentially extend your warranty.