Maklumat Keselamatan Penting
Please read this manual thoroughly before operating your Inventor Cool portable air conditioner. Keep these instructions for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, or injury.
- Pastikan unit disambungkan ke soket elektrik yang dibumikan dengan betul dengan volum yang betultage (240 Volt).
- Jangan kendalikan unit dengan kord kuasa atau palam yang rosak.
- Do not block air inlets or outlets. Maintain at least 30 cm (12 inches) clearance around the unit.
- Jangan masukkan jari atau objek ke dalam saluran udara.
- Sentiasa cabut plag unit sebelum membersihkan atau menservis.
- Jangan gunakan unit ini di persekitaran basah atau berhampiran air.
- Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka.
Arahan Persediaan
1. Membongkar dan Meletakkan
Carefully remove the air conditioner from its packaging. The unit weighs approximately 24 kg, so assistance may be required. The unit is equipped with durable casters for easy movement. Place the unit on a firm, level surface in the desired room. Ensure there is adequate space around the unit for proper airflow.
The portable air conditioner features robust casters for effortless movement across various surfaces.
2. Pemasangan Hos Ekzos
The portable air conditioner generates heat during operation, which must be vented outside. Connect the flexible exhaust hose to the air outlet on the back of the unit. Extend the hose to a window or other suitable opening and secure it using the provided window kit. Ensure the window kit creates a tight seal to prevent outside air from entering the room, which would reduce cooling efficiency.
The air conditioner with its flexible exhaust hose and window kit attached, ready for installation to vent hot air outdoors.
3. Sambungan Kuasa
Plug the power cord into a grounded 240V electrical outlet. Ensure the plug is fully inserted and the connection is secure.
belakang view of the unit, highlighting the power cord connection and the drainage outlet for condensate.
Arahan Operasi
Your Inventor Cool portable air conditioner can be operated using the control panel on the top of the unit or the elegant remote control.
1. Panel Kawalan Selesaiview
Close-up of the top control panel, featuring buttons for Mode, Fan Speed, Temperature adjustment, and Power On/Off, along with a digital display.
- Butang HIDUP/MATI: Menghidupkan atau mematikan unit.
- Butang MOD: Cycles through operating modes: Cooling, Dehumidification, and Fan.
- +/- Butang: Adjust the desired temperature in Cooling mode or set the timer.
- Butang KIPAS: Memilih kelajuan kipas (Rendah, Sederhana, Tinggi).
- Paparan Digital: Menunjukkan tetapan suhu atau pemasa yang ditetapkan.
2. Alat Kawalan Jauh
The remote control provides convenient access to all functions. Insert two AAA batteries (not included) into the remote. Note that some buttons on the remote (e.g., 'Heat' or 'Swing') may not be functional for this specific model, as it is a cooling-only unit without an automatic swing feature.
3. Mod Operasi
- Mod Penyejukan: Press the MODE button until the snowflake icon appears. Use the +/- buttons to set your desired temperature. The unit will cool the room to the set temperature with an 8000 BTU/h cooling capacity.
- Mod Penyahlembapan: Press the MODE button until the water drop icon appears. In this mode, the unit will remove excess moisture from the air, with a capacity of 0.75 liters per day. The fan speed is typically fixed in this mode.
- Mod Kipas: Press the MODE button until the fan icon appears. The unit will circulate air without cooling. Use the FAN button to select your preferred fan speed (3 speeds available).
4. Fungsi Pemasa
The timer function allows you to set a specific time for the unit to turn on or off automatically. Refer to the detailed instructions in the full user manual for precise timer programming steps.
Penyelenggaraan
Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan jangka hayat penghawa dingin anda.
1. Pembersihan Penapis Udara
The air filter should be cleaned regularly, approximately every 3 months or more frequently depending on usage and air quality. A dirty filter can reduce cooling efficiency and airflow.
- Cabut plag penghawa dingin dari salur keluar kuasa.
- Locate and remove the air filter panel, usually on the side or back of the unit.
- Gently wash the filter under running water (preferably warm) to remove dust and debris. A soft brush can be used for stubborn dirt.
- Allow the filter to air dry completely before reinserting it into the unit. Do not expose to direct sunlight or high heat.
2. Saliran Air
The Inventor Cool unit features an internal evaporator that helps to expel most of the condensed water through the exhaust hose. However, in high humidity conditions, the internal water tank may fill up. When the tank is full, the unit will stop operating and display an 'H8' error code.
- Cabut palam unit.
- Place a shallow pan or tray under the drainage outlet located at the bottom rear of the unit.
- Remove the rubber stopper from the drainage outlet to allow water to flow out.
- Once all water has drained, replace the rubber stopper securely.
- For continuous drainage, you can attach a suitable hose (not included) to the drainage outlet and direct it to a floor drain.
3. Penyimpanan
Sebelum menyimpan unit untuk tempoh yang panjang:
- Drain all water from the unit.
- Bersihkan penapis udara.
- Cabut palam kord kuasa dan gulungkannya dengan kemas.
- Store the unit in a dry, upright position, preferably in its original packaging, away from direct sunlight and extreme temperatures.
Menyelesaikan masalah
Jika anda menghadapi masalah dengan penghawa dingin anda, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Unit tidak dihidupkan. | No power, power cord unplugged, circuit breaker tripped, water tank full (H8 error). | Check power connection, reset circuit breaker, drain water tank if H8 error is displayed. |
| Penyejukan yang tidak mencukupi. | Dirty air filter, blocked air inlets/outlets, exhaust hose not properly installed/sealed, room too large, doors/windows open. | Clean air filter, ensure clear airflow, properly install and seal exhaust hose, close doors/windows. |
| Unit bising. | Normal operation sound (compressor/fan), unit not on a level surface, loose parts. | Portable air conditioners produce some operational noise. Ensure the unit is on a stable, level surface. If noise is excessive or unusual, contact support. |
| Air bocor dari unit. | Drainage plug not secured, continuous drainage hose blocked or disconnected. | Ensure drainage plug is tightly closed. Check continuous drainage hose for blockages or proper connection. |
Spesifikasi
- Jenama: Pencipta
- Nombor Model: 9771673968942
- Kapasiti Penyejukan: 8000 BTU/j
- Kapasiti Penyahlembapan: 0.75 Liter/hari
- Kelas Kecekapan Tenaga: A
- Dimensi (D x W x H): 34.5 cm x 30 cm x 79 cm
- Berat Barang: 24 Kilogram
- Tahap Bunyi: 54 Desibel
- Voltage: 240 Volt
- Penggunaan Kuasa: 900 Watt
- Kaedah Kawalan: Alat Kawalan Jauh, Panel Kawalan
- Komponen yang Disertakan: Window kit with flexible exhaust hose
The unit displaying its Energy Class A rating, indicating efficient operation.
Waranti dan Sokongan
This Inventor product comes with a limited warranty. For detailed information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Inventor webtapak.
For any technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Inventor's specialized customer support. Contact details can typically be found on the manufacturer's webtapak atau dalam pembungkusan produk.