1. Pengenalan
Thank you for choosing the AMIR Upgraded 3.15-inch Motion Sensor LED Night Light. This cordless, battery-powered light is designed to provide convenient and efficient illumination in various indoor spaces. Its advanced PIR motion and light sensors ensure light is only activated when needed, conserving battery life. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Image 1: AMIR Motion Sensor Light providing illumination under a kitchen cabinet.
2. Ciri-ciri Produk
- Reka bentuk yang dipertingkatkan: Features a 15% larger design and 30% increased brightness compared to previous models.
- PIR Motion & Light Sensor: Automatically turns on when motion is detected within 10 feet in dark conditions and turns off after 15 seconds of no motion.
- Pemasangan Mudah: No hard-wiring required. Equipped with adhesive pads and a built-in magnet for versatile placement.
- Dikendalikan Bateri: Cordless operation using 3 AAA batteries (not included), ideal for areas without electrical access.
3. Kandungan Pakej
Pakej termasuk item berikut:
- 6 x AMIR Motion Sensor Light units
- 6 x Iron Sheets with Strong Adhesive Tape
- 1 x Manual Pengguna
4. Persediaan dan Pemasangan
4.1. Pemasangan Bateri
- Gently twist the back cover of the light unit counter-clockwise to open it.
- Insert 3 AAA batteries (not included) into the battery compartment, ensuring correct polarity (+/-).
- Align the back cover with the unit and twist clockwise to securely close it.
Image 2: Illustration of battery installation process.
4.2. Memasang Cahaya
The AMIR Motion Sensor Light offers two convenient mounting options:
- Lampiran Magnetik: The light has a built-in magnet. Simply attach it to any ferrous metal surface.
- Pad Pelekat: For non-metal surfaces, use the provided iron sheets with strong adhesive tape. Peel off the protective film from the adhesive, stick the iron sheet to your desired clean, dry surface, and then magnetically attach the light to the iron sheet.
Image 3: Demonstrating magnetic and adhesive installation methods.
4.3. Important Installation Guidelines
- This product activates only in dark spaces. Its light sensor detects ambient brightness and remains off in well-lit conditions. Therefore, install in dim/dark areas.
- Never mount the light fixture in high-temperature zones, as heat weakens the adhesive and causes the fixture to detach. Installation in room-temperature environments is recommended to ensure secure, long-lasting adhesion.
- Avoid mounting two lights too close together, as this may interfere with their motion sensing capabilities.
- Do not face the lights towards vents or mount them in moist places.
Image 4: Scenarios to avoid during installation for optimal performance.
5. Arahan Operasi
The AMIR Motion Sensor Light is designed for automatic, hands-free operation:
- Pengaktifan Automatik: The light will automatically turn on when its PIR motion sensor detects movement within approximately 10 feet (3 meters) in a dark environment.
- Penyahaktifan Automatik: The light will automatically turn off approximately 15 seconds after no motion is detected. This feature helps prolong battery life.
- Light Sensor Functionality: The integrated light sensor ensures the unit only activates in low-light conditions, preventing unnecessary illumination during daylight hours.
Image 5: Visual explanation of the light and motion sensor operation.
Video 1: Official product video demonstrating the features and installation of the AMIR Motion Sensor Light. It shows the light activating with motion and its compact design.
6. Penyelenggaraan
6.1. Penggantian Bateri
When the light output diminishes or the unit stops activating, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. Always replace all 3 AAA batteries at once with new ones for optimal performance.
6.2. Pembersihan
To clean the light unit, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | 1. Bateri mati atau dimasukkan dengan salah. 2. Cahaya persekitaran terlalu terang. 3. Tiada gerakan dikesan dalam julat. | 1. Gantikan bateri, pastikan kekutuban yang betul. 2. Move the light to a darker area. 3. Ensure motion occurs within 10 feet of the sensor. |
| Light turns on too frequently. | 1. Placed in a high-traffic area. 2. Interference from other light sources or heat. | 1. Relocate the light to a less active area. 2. Ensure the light is not near heat sources or facing vents. |
| Light falls off mounting surface. | 1. Adhesive weakened by heat or improper application. 2. Surface not clean or dry. | 1. Reapply adhesive to a clean, room-temperature surface. 2. Ensure surface is clean and dry before applying adhesive. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | AMIR |
| Nombor Model | Gerakan Sensor Pergerakan |
| Jenis Sumber Cahaya | LED |
| Sumber Kuasa | Dikuasakan oleh Bateri (3 x AAA, tidak termasuk) |
| Jenis Suis | PIR Motion & Light Sensor |
| Julat Penderia Pergerakan | Sehingga 10 kaki (3 meter) |
| Masa Automatik | 15 saat (selepas tiada gerakan) |
| Jenis Pemasangan | Wall Mount (Adhesive/Magnetic) |
| Dimensi Produk | 3.15 inches (Base Diameter) |
| Berat Barang | 1.76 auns |
| Jenis Bahan | plastik |
| Penggunaan Dalaman/Luar | Penggunaan dalaman sahaja |
Image 6: Lighting Facts for the AMIR Motion Sensor Light.
9. Waranti dan Sokongan
This AMIR Motion Sensor Light comes with a Waranti pengilang selama 1 tahun. For any product inquiries, technical support, or warranty claims, please contact AMIR customer service through the retailer's platform or visit the official AMIR webtapak untuk maklumat hubungan.