pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Tesa Assa Abloy 3903U0NE Ball Door Knob Set. Please read these instructions carefully before beginning installation or use to ensure proper function and safety.
Image: Tesa Assa Abloy 3903U0NE Ball Door Knob Set in Black/White. This image shows the complete knob set, including both interior and exterior components.
Maklumat Keselamatan
- Always wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
- Ensure all components are securely fastened before use. Loose parts can lead to malfunction or injury.
- Do not modify the product. Unauthorized modifications can compromise safety and void the warranty.
- Jauhkan bahagian kecil daripada kanak-kanak untuk mengelakkan bahaya tercekik.
Persediaan dan Pemasangan
Komponen yang Disertakan:
- Set of Knobs
- Locker (Latch Mechanism)
- Fixing Elements (Screws, Spindle)
- Assembly Instructions (Refer to the included paper manual for detailed steps)
Langkah Pemasangan Umum:
- Sediakan Pintu: Mark and drill holes on the door face and edge according to the provided templates and dimensions. Refer to the technical drawings below for precise measurements.
- Pasang Selak: Insert the latch mechanism (locker) into the door edge hole and secure it with screws. Ensure the latch bolt operates smoothly.
- Assemble Knobs: Insert the spindle through the latch mechanism. Attach the exterior knob, then the interior knob, ensuring they align correctly.
- Secure the Knobs: Fasten the knobs using the provided fixing elements. Test the knob operation and latch engagement.
- Pasang Strike Plate: Mark and chisel out the door frame for the strike plate. Secure the strike plate with screws, ensuring the latch bolt engages properly when the door is closed.
Image: Door Preparation Dimensions. This diagram provides critical measurements for preparing the door, including bore hole diameters (Ø25, Ø42) and backset dimensions (60/70 mm) for the latch mechanism. All measurements are in millimeters.
Image: Ball Door Knob Dimensions. This diagram illustrates the key dimensions of the ball door knob assembly, including knob diameter (Ø53, Ø65), overall length (64), and spindle length (33-52 mm). All measurements are in millimeters.
Arahan Operasi
The Tesa Assa Abloy 3903U0NE Ball Door Knob Set is designed with Function 03, typically used for bathrooms. This function provides privacy and emergency access.
Function 03 (Bathroom):
- Both sides of the door can be locked and unlocked using the interior thumb-turn (crutch).
- For emergency situations, external unlocking is possible using an emergency device (e.g., a coin or flat tool) inserted into the exterior knob's emergency slot.
Untuk berakhirview of other available functions, please refer to the function table below:
Image: Door Knob Function Table. This table explains various functions of Tesa Assa Abloy door knobs, such as 'Entrance', 'Bathroom', 'Passage', and 'Office', detailing how locking and unlocking mechanisms operate for each function code.
Penyelenggaraan
- Pembersihan: Clean the knob surfaces with a soft, damp kain. Elakkan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan kemasan.
- Pelinciran: Periodically apply a small amount of graphite-based lubricant to the latch mechanism and keyway (if applicable) to ensure smooth operation. Do not use oil-based lubricants, as they can attract dust and debris.
- Pemeriksaan: Regularly check all screws and fixing elements for tightness. Tighten any loose screws to prevent wobbling or malfunction.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tombol kaku atau sukar dipusing. | Kekurangan pelinciran; serpihan dalam mekanisme. | Apply graphite lubricant to the latch mechanism. Clean any visible debris. |
| Bolt selak tidak ditarik balik sepenuhnya. | Misalignment; debris; worn spring. | Check alignment of latch and strike plate. Clean mechanism. If issue persists, consider professional inspection. |
| Tombol longgar atau goyah. | Skru pemasangan longgar. | Ketatkan semua skru pelekap yang kelihatan. |
Spesifikasi
| Nombor Model | 3903U0NE |
| Jenama | Tesa Assa Abloy |
| bahan | Zink |
| warna | Hitam/Putih |
| Gaya | bola |
| Kemasan Luaran | Zink Hitam |
| Jenis Selesai | Satin |
| Jenis Pemegang | Tombol |
| Jenis Kunci | Key Lock (Function 03 has emergency access) |
| Berat Barang | 0.5 Kilogram |
| Kegunaan Khusus | Door (Bathroom, Passage, etc.) |
Maklumat Waranti
Tesa Assa Abloy products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Tesa Assa Abloy webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.
Sokongan Pelanggan
If you encounter any issues or have questions regarding your Tesa Assa Abloy Ball Door Knob Set that are not covered in this manual, please contact Tesa Assa Abloy customer support. Contact details can typically be found on the product packaging or the official brand webtapak.
Sumber Dalam Talian: For additional support, FAQs, and product information, please visit the official Tesa Assa Abloy webtapak.