LOZ 9318 Tiger Building Blocks Instruction Manual

1. Pengenalan

Welcome to your LOZ 9318 Tiger Building Blocks set. This manual provides detailed instructions for assembling, operating, and maintaining your new building block model. Please read through these instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

2. Maklumat Keselamatan

• Warning: Choking Hazard - Small Parts. Produk ini mengandungi bahagian-bahagian kecil dan tidak sesuai untuk kanak-kanak di bawah umur 3 tahun.
• Pengawasan orang dewasa disyorkan semasa pemasangan dan permainan, terutamanya untuk pengguna yang lebih muda.
• Keep all building blocks and packaging materials away from heat sources and open flames.
• Do not put blocks in mouth or ingest.

3. Kandungan Pakej

Sila sahkan bahawa semua komponen terdapat dalam pakej anda:

• Approximately 250 x LOZ Micro Building Blocks (various shapes and colors)
• 1 x Instruction Booklet (this manual)
• 1 x Block Separator Tool (may be included in some sets)

Jika mana-mana bahagian hilang atau rosak, sila rujuk bahagian 'Waranti dan Sokongan' untuk bantuan.

4. Persediaan (Arahan Pemasangan)

Follow these steps to assemble your LOZ 9318 Tiger Building Blocks model:

Langkah 1: Bongkar dan Susun

Carefully open the packaging and lay out all the block bags. It is highly recommended to sort the blocks by color and shape into separate piles or containers. This will significantly speed up the assembly process and prevent frustration.

Image showing the LOZ 9318 Tiger Building Blocks set, including the packaging and some of the micro blocks, ready for assembly.

Step 2: Follow the Illustrated Steps

Refer to the step-by-step illustrations provided in the separate instruction sheet or within this manual. Each step will show which blocks to use and where to place them. Begin by identifying the base pieces and gradually build upwards, following the sequence shown.

Step 3: Building the Tiger Model

• Pay close attention to the color and orientation of each block as depicted in the diagrams.
• Ensure each block is firmly connected to the previous one. Micro blocks require precise alignment and gentle, even pressure to snap into place.
• The model is typically built layer by layer. Double-check each layer before proceeding to the next.
• If a block is difficult to connect, ensure there are no obstructions and try adjusting its angle. Avoid excessive force, which can damage the blocks.
• If you make a mistake, carefully use the block separator tool (if provided) to detach pieces. Insert the thin edge of the tool between the blocks and gently pry them apart.

5. Operating (Using the Model)

Once fully assembled, your LOZ 9318 Tiger model can be used for display as a decorative item or for imaginative play. Handle the model with care to prevent accidental disassembly. It is designed to be a stable structure when correctly assembled.

6. Penyelenggaraan

Pembersihan

• To clean the blocks or the assembled model, gently wipe them with a dry, soft cloth to remove dust.
• Untuk kotoran degil, gunakan sedikit damp cloth with a small amount of mild soap. Immediately wipe dry with a clean, soft cloth.
• Do not immerse blocks in water or use harsh chemical cleaners, as this may damage the plastic or colors.

Penyimpanan

Store the assembled model or any loose blocks in a cool, dry place away from direct sunlight. Prolonged exposure to sunlight can cause discoloration or degradation of the plastic.

7. Penyelesaian masalah

• Potongan yang Hilang: Double-check all packaging materials and the surrounding area. Small micro blocks can be easily overlooked. If pieces are genuinely missing after a thorough search, please contact customer support as per the 'Warranty and Support' section.
• Kesukaran Menyambungkan Blok: Ensure blocks are correctly aligned before applying pressure. Micro blocks require precise positioning. If a block still won't connect, check for any debris or manufacturing imperfections.
• Model Runtuh: This usually indicates that some connections are not fully secured or blocks are incorrectly placed. Re-examine the assembly steps and ensure all blocks are firmly pressed together.

8. Spesifikasi

9. Waranti dan Sokongan

For product support, inquiries about missing parts, or warranty information, please contact the manufacturer, Carmel RC -Toys, directly through their official customer service channels. Please retain your purchase receipt as proof of purchase, as it may be required for warranty claims or support requests.