Manual Pengguna Termometer Daging Digital Profesional DeltaTrak 11040

pengenalan

This manual provides comprehensive instructions for the safe and effective use of your DeltaTrak 11040 Professional Digital Meat Thermometer. Designed for accuracy and durability, this waterproof thermometer is ideal for various cooking applications, including meat, liquids, deep frying, and candy making. Please read this manual thoroughly before operating the device.

Penerangan Imej: A DeltaTrak 11040 Professional Digital Meat Thermometer, featuring a round blue and white display unit with a digital temperature reading and a long stainless steel probe.

Ciri-ciri Produk

• Accurate and Fast: Instant read thermo sensor provides readings within 1 second, accurate to ±0.9°F (±0.5°C).
• IP65 Tahan Air: Allows for quick and easy cleaning under running water.
• Pelbagai Guna: Suitable for meats, liquids, deep frying, and candy making.
• Memori Minimum/Maks: Stores the lowest and highest temperature readings.
• Food Grade and Certified: Complies with FDA food code regulations and provides NIST traceable readings with automatic calibration features.
• Reduced Tip Probe: For faster response times.
• °F/°C Switchable: Tukar antara Fahrenheit dan Celsius dengan mudah.

Kandungan Pakej

• DeltaTrak 11040 Digital Meat Thermometer
• 1 Bateri CR2 (termasuk)

Persediaan

1. Pemasangan Bateri

The DeltaTrak 11040 thermometer comes with a CR2 battery pre-installed. If replacement is needed:

1. Cari petak bateri di belakang termometer.
2. Use a coin or small screwdriver to carefully open the battery cover.
3. Masukkan satu bateri CR2, pastikan kekutuban (+/-) yang betul.
4. Tutup penutup bateri dengan selamat.

2. Penggunaan Awal

Before first use, clean the probe with warm soapy water and rinse thoroughly. The thermometer is ready for use once the battery is installed.

Operasi

1. Hidupkan/Mati Kuasa

Tekan ke Butang kuasa () once to turn the unit on. Press and hold the Power button for approximately 3 seconds to turn the unit off.

2. Mengambil Bacaan Suhu

1. Hidupkan termometer.
2. Insert the stainless steel probe into the center of the food item, ensuring the tip is fully immersed and not touching bone or the bottom of the pan.
3. Wait for the reading to stabilize (typically within 1 second).
4. Baca suhu yang dipaparkan pada skrin LCD.

Nota: For best accuracy, ensure the probe is inserted deep enough into the thickest part of the food.

Penerangan Imej: A close-up of the thermometer's probe inserted into a piece of meat, indicating the target area for temperature measurement.

3. Min/Max Memory Function

The thermometer records the minimum and maximum temperatures measured during an operation cycle.

1. After turning the unit on, the display will show the current temperature.
2. Tekan ke Butang MIN/MAX once to display the maximum temperature recorded since the unit was turned on.
3. Tekan ke Butang MIN/MAX a second time to display the minimum temperature recorded.
4. Tekan ke Butang MIN/MAX a third time to return to the current temperature reading.

The Min/Max memory resets each time the thermometer is turned off and then on again.

4. Switching Between Fahrenheit and Celsius (°F/°C)

Untuk menukar unit suhu:

1. Cari yang kecil Suis °F/°C di dalam petak bateri.
2. Open the battery cover as described in the "Battery Installation" section.
3. Use a small pointed object (like a pen tip) to slide the switch to your desired unit (°F or °C).
4. Tutup penutup bateri dengan selamat.

Penerangan Imej: Satu jarak dekat view of the DeltaTrak 11040 thermometer's display, highlighting the °F/°C selectable feature and the Min/Max memory button. The display shows "72.9°F".

5. Auto-Calibration

The thermometer features an auto-calibration function. For NIST traceability and accurate readings, refer to the calibration procedure detailed on the product packaging or DeltaTrak's official support resources.

Penyelenggaraan

1. Pembersihan

The DeltaTrak 11040 is IP65 water resistant. To clean:

1. Lap kuar dengan iklanamp cloth or wash under running water using mild soap.
2. Jangan rendam seluruh badan termometer ke dalam air.
3. Keringkan dengan teliti sebelum disimpan.

Penerangan Imej: The DeltaTrak 11040 thermometer with water splashing around its display, illustrating its water-resistant design.

2. Penyimpanan

Store the thermometer in a clean, dry place at room temperature when not in use. Keep the probe protected to prevent damage.

3. Penggantian Bateri

Replace the CR2 battery when the display becomes dim or the thermometer fails to power on. Follow the "Battery Installation" steps.

Menyelesaikan masalah

• Tiada Paparan/Malapkan Paparan: Periksa pemasangan bateri. Gantikan bateri CR2 jika perlu.
• Bacaan Tidak Tepat: Ensure the probe is fully inserted into the food and not touching bone or the pan. Verify the °F/°C setting. If issues persist, refer to the auto-calibration instructions or contact support.
• Bacaan Lambat: Ensure the probe tip is clean and free of debris.

Spesifikasi

Waranti dan Sokongan

For warranty information and technical support, please visit the official DeltaTrak webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda untuk tuntutan waranti.

DeltaTrak Webtapak: www.deltatrak.com