Produk Selesaiview
The Smith & Locke Medium Duty Push-Button Lock is a robust mechanical keyless entry system designed for both interior and exterior doors. It features a 14-button numeric keypad for secure access and a tubular latch with a hold-back function. This lock is easy to install and comes with all necessary components for a complete setup, including a numeric keypad front plate, back plate, lock spindle, pin, strike plate, latch support post, installation template, and fixings. It is finished in silver and is suitable for door thicknesses between 35mm and 65mm.
Rajah 1: Depan view of the Smith & Locke Medium Duty Push-Button Lock. It features a silver finish with a 14-button numeric keypad and a turn knob at the bottom. The lock is designed for keyless entry.
Kandungan Pakej
Sebelum memulakan pemasangan, pastikan semua komponen ada:
- Numeric Keypad Front Plate
- Plat Belakang
- Selak Tiub
- Lock Spindle
- Pin
- Pukulan Pukulan
- Pos Sokongan Selak
- Templat Pemasangan
- Fixings (screws, etc.)
- Key (for key unlock feature)
Persediaan dan Pemasangan
This section provides general guidelines for installing your push-button lock. For detailed steps, always refer to the included installation template and specific instructions provided with your product packaging.
- Penyediaan: Ensure the door thickness is between 35mm and 65mm. Mark the drilling points on the door using the provided template.
- Penggerudian: Carefully drill the necessary holes for the tubular latch, spindle, and fixing bolts according to the template.
- Pasang Selak: Insert the tubular latch into the edge of the door and secure it with screws.
- Assemble Lock: Attach the lock spindle to the keypad front plate. Position the front plate and back plate on either side of the door, ensuring the spindle passes through the latch.
- Secure Plates: Secure the front and back plates using the provided fixings. Ensure the lock is aligned and operates smoothly.
- Pasang Strike Plate: Install the strike plate and latch support post on the door frame, aligning them with the latch.
Nota: Professional installation is recommended if you are unsure about any steps.
Arahan Operasi
Setting/Changing the Code
The Smith & Locke Push-Button Lock uses a mechanical code system. The default code is typically set at the factory or can be found in the specific instructions included with your lock. To change the code:
- Locate the code changing mechanism on the back of the front plate (usually small pins or screws corresponding to each button).
- Using a small tool (e.g., screwdriver), rotate the pins for the desired code numbers to the "ON" position and others to the "OFF" position.
- Ensure the new code is memorable but not easily guessable. Test the code before closing the door.
Membuka Kunci
- Enter your programmed code by pressing the correct buttons in any order.
- Rotate the turn knob to retract the latch.
- The lock also features a Buka Kunci Kekunci function, allowing entry with a physical key if provided.
Closing the Lock
Simply close the door. The latch will automatically engage, securing the door. No code entry is required to close the door from the inside.
Penyelenggaraan
Regular maintenance ensures the longevity and smooth operation of your lock.
- Pembersihan: Lap bahagian luar kunci dengan kain lembutamp kain. Elakkan pembersih atau pelarut yang melelas yang boleh merosakkan kemasan.
- Pelinciran: Periodically apply a small amount of silicone-based lubricant to the latch bolt and internal moving parts to ensure smooth operation. Do not use oil-based lubricants as they can attract dust.
- Semak Pembetulan: Periodically check that all screws and fixings are tight. Retighten if necessary to prevent wobbling or misalignment.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Code not working / Lock not opening | Incorrect code entered; Code not set correctly; Internal mechanism issue. |
|
| Latch sticking or not retracting smoothly | Lack of lubrication; Misalignment of latch or strike plate; Debris. |
|
| Buttons are stiff or unresponsive | Dirt or grime build-up; Internal mechanism issue. |
|
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Smith |
| Nombor Model | 5054814998058 |
| Jenis Kunci | Push Button (Mechanical) |
| Keserasian Ketebalan Pintu | 35mm – 65mm |
| Front Plate Dimensions (L x D x H) | 41 x 35 x 141 mm |
| Lock Spindle | 60 mm |
| Papan kekunci | 14-button numeric |
| Ciri Khas | Key Unlock, Hold-back function |
| Berat badan | 1 kg (approx. 1.18 kg as per description) |
| Sesuai Untuk | Interior and Exterior Doors |
Maklumat Waranti
For details regarding the warranty period and terms for your Smith & Locke Medium Duty Push-Button Lock, please refer to the warranty card included with your product packaging or the purchase documentation. Keep your proof of purchase for warranty claims.
Sokongan Pelanggan
If you require technical assistance, have questions about installation, or need to report an issue with your Smith & Locke Push-Button Lock, please contact Smith customer service. Contact information can typically be found on the product packaging or the manufacturer's official webtapak.
Sila sediakan nombor model anda (5054814998058) dan butiran pembelian semasa menghubungi sokongan.
