Manual Pengguna Stesen Dok HDD Dua Bay USB 3.0 LC-Power LC-DOCK-U3-III

1. Lebihview

The LC-Power LC-DOCK-U3-III is a versatile USB 3.0 dual bay docking station designed for 2.5-inch and 3.5-inch SATA HDDs/SSDs. It provides a convenient solution for accessing multiple hard drives, data backup, and disk cloning without the need for a computer connection. This manual provides detailed instructions for setup, operation, and maintenance of your docking station.

Imej 1.1: Depan view of the LC-Power LC-DOCK-U3-III Docking Station, showing two drive bays and LED indicators.

2. Ciri-ciri Produk

• Menyokong dua HDD/SSD SATA I/II/III 2.5 inci atau 3.5 inci secara serentak.
• USB 3.0 interface for high-speed data transfer (up to 5 Gbps).
• Serasi ke belakang dengan USB 2.0.
• Standalone clone function (computer-independent disk duplication).
• LED indicators for power, activity, and cloning progress.
• Plug & Play functionality, no driver installation required for most operating systems.
• Serasi dengan sistem pengendalian Windows, macOS dan Linux.

3. Kandungan Pakej

Sila semak pakej untuk item berikut:

• LC-Power LC-DOCK-U3-III Docking Station
• USB 3.0 Cable
• Penyesuai Kuasa
• Manual Pengguna (dokumen ini)

Image 3.1: Retail packaging of the LC-Power LC-DOCK-U3-III, showing the product and key features.

4. Arahan Persediaan

Ikuti langkah ini untuk menyediakan stesen dok anda:

1. Sambungkan Kuasa: Connect the included power adapter to the DC 12V port on the back of the docking station and then plug it into a power outlet.
2. Connect to Computer (Optional for cloning): Connect the USB 3.0 cable from the docking station's USB 3.0 port to an available USB 3.0 port on your computer. If your computer only has USB 2.0 ports, the device will still function but at USB 2.0 speeds.
3. Masukkan Pemacu Keras:
   • Ensure the docking station is powered off (ON/OFF switch in OFF position).
   • Carefully insert your 2.5-inch or 3.5-inch SATA HDDs/SSDs into the drive bays. Ensure they are firmly seated.
4. Hidupkan kuasa: Flip the ON/OFF switch on the back of the docking station to the ON position. The power LED will illuminate.

Image 4.1: Rear panel of the docking station, highlighting the USB 3.0 port, DC 12V power input, and ON/OFF switch.

Imej 4.2: Cthample of 2.5-inch and 3.5-inch hard drives correctly inserted into the docking station bays.

5. Arahan Operasi

5.1. Data Transfer Mode (Connected to Computer)

1. Ensure the docking station is connected to your computer via the USB 3.0 cable and powered on.
2. Insert one or two SATA HDDs/SSDs into the bays.
3. Your operating system should automatically detect the drives. They will appear as removable storage devices.
4. You can now access, read, and write data to the drives as you would with any other external storage.
5. Penting: Always use the "Safely Remove Hardware" option in your operating system before disconnecting the docking station or removing drives to prevent data corruption.

5.2. Standalone Clone Function

The cloning function allows you to duplicate a source drive to a target drive without a computer connection. The target drive must be equal to or larger than the source drive's capacity.

1. Penyediaan:
   • Ensure the docking station is powered off and disconnected from the computer.
   • Masukkan Pemacu Sumber (pemacu yang anda ingin salin DARI) ke dalam HDD1 (Source) teluk.
   • Masukkan Pemacu Sasaran (pemacu yang anda ingin salin) ke dalam HDD2 (Target) teluk.
   • Verify that the target drive has equal or greater capacity than the source drive. All data on the target drive will be overwritten.
2. Start Cloning:
   • Hidupkan stesen dok.
   • Press and hold the "Clone" button (often labeled "One Touch Clone" or similar) for approximately 3-5 seconds until the cloning progress LEDs begin to flash.
   • Release the button. The cloning process will begin.
3. Pantau Kemajuan: The LED indicators (e.g., 25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress.
4. penyiapan: Once all progress LEDs are solid, the cloning process is complete.
5. Power Off and Remove: Power off the docking station before removing the drives.

Warning: Do not interrupt the cloning process. Doing so may result in data loss or corruption on both drives.

6. Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to clean the exterior of the docking station. Do not use liquid cleaners or solvents.
• Storan: Apabila tidak digunakan, simpan stesen dok di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
• Pengendalian: Handle the docking station and hard drives with care to avoid physical damage. Avoid dropping or subjecting the device to strong impacts.

7. Penyelesaian masalah

8. Spesifikasi

9. Maklumat Keselamatan

• Do not expose the device to moisture, dust, or extreme temperatures.
• Gunakan hanya penyesuai kuasa yang disediakan. Menggunakan penyesuai yang tidak dibenarkan boleh merosakkan peranti dan membatalkan jaminan.
• Jangan cuba membuka atau membaiki peranti ini sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Jauhkan peranti daripada medan magnet yang kuat.
• Pastikan pengudaraan yang betul di sekeliling peranti semasa operasi.

10. Waranti dan Sokongan

LC-Power products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official LC-Power website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact LC-Power customer service through their official channels.

LC-Power Official Webtapak: www.lc-power.com