pengenalan
Thank you for choosing the Bernhard Products 10-Inch Silent Quartz Wall Clock. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new timepiece. Please read these instructions carefully before use and retain them for future reference.
Persediaan
Membongkar
Carefully remove the clock from its packaging. Inspect the clock for any signs of damage. Ensure all components are present.
Pemasangan Bateri
- Cari petak bateri di belakang jam.
- Insert one (1) AA battery (not included) into the compartment. Ensure the positive (+) end of the battery is inserted first, aligning with the indicator inside the compartment.
- Tutup penutup petak bateri dengan selamat.

Imej: Belakang view of the clock, highlighting the battery compartment and the integrated hanging slot.
Menetapkan Masa
- On the back of the clock, locate the time adjustment knob, typically a small wheel or dial near the battery compartment.
- Gently turn the knob in either direction to move the hour and minute hands to the correct time.
- Once the correct time is set, the second hand will begin to move, indicating the clock is operating.

Image: Close-up of the clock face, showing the hour, minute, and sweep second hands.
Memasang Jam
- Choose a suitable location on a wall for your clock. Ensure the surface is stable and can support the clock's weight.
- On the back of the clock, locate the integrated hanging slot.
- Securely install a nail or wall hook (not included) into the chosen wall location.
- Carefully hang the clock onto the installed nail or hook, ensuring it is level and stable.

Image: The 10-inch wall clock displayed on a wall, illustrating its appearance when mounted.
Operasi
Penjagaan masa
Your Bernhard Products wall clock features precise quartz movements, ensuring accurate timekeeping. The silent, non-ticking sweep movement provides a quiet environment, making it suitable for bedrooms, offices, classrooms, and other spaces where silence is preferred.
Penyelenggaraan
Pembersihan
To clean your clock, gently wipe the plastic frame and glass lens with a soft, dry cloth. Avoid using abrasive cleaners or chemical sprays, as these may damage the finish or the clock's components.
Penggantian Bateri
When the clock begins to lose time or stops functioning, it is an indication that the battery needs to be replaced. Follow the battery installation steps outlined in the Setup section to replace the AA battery.
Menyelesaikan masalah
If you encounter any issues with your clock, please refer to the following common problems and solutions:
- Clock Not Running or Stopping:
Check if the AA battery is inserted correctly with the positive (+) end first. Replace the battery with a fresh one if necessary. Ensure the time adjustment knob is not stuck or obstructed. - Clock Making Noise:
This clock is designed with a silent, non-ticking sweep movement. If you hear any ticking or unusual noises, it may indicate a defect in the movement. Please refer to the warranty information for further assistance. - Paparan Masa Salah:
If the time displayed is incorrect, adjust the time using the adjustment knob on the back of the clock. If the clock consistently loses or gains time after adjustment and battery replacement, it may indicate a movement issue.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Produk Bernhard |
| Nombor Model | 01176 |
| Saiz | Diameter 10 Inci |
| warna | Hitam |
| Jenis Paparan | Analog |
| Sumber Kuasa | Dikuasakan oleh Bateri (1 bateri AA diperlukan) |
| bahan | Plastic Frame / Glass Cover |
| Ciri Khas | Silent Clock, Lightweight |
| Berat Barang | 9.6 auns |
Waranti
This Bernhard Products wall clock comes with a Waranti Pengeluar 12 Bulan. Please retain your proof of purchase for any warranty claims. The warranty covers defects in materials and workmanship under normal use.
Sokongan
For additional support or inquiries regarding your Bernhard Products wall clock, please visit the official Bernhard Products store on Amazon or contact customer service through your purchase platform. Always refer to your product's specific model number (01176) when seeking assistance.