Broncolor RFS 2.1 Transmitter User Manual

1. Pengenalan

The Broncolor RFS 2.1 Transmitter is a wireless radio frequency system designed to eliminate the need for PC cords in studio and field photography setups. It enables reliable wireless triggering and control of compatible Broncolor flash units, enhancing flexibility and efficiency in your workflow.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your RFS 2.1 Transmitter to ensure optimal performance and longevity.

Figure 1: Broncolor RFS 2.1 Transmitter. This image shows the compact design of the transmitter, typically mounted on a camera's hot shoe.

2. Ciri-ciri Utama

The Broncolor RFS 2.1 Transmitter offers a range of features designed for professional use:

• 40 Saluran: Menyediakan ample options for interference-free operation in various environments.
• Julat Luar: Achieves reliable wireless communication up to 656 feet (200 meters) outdoors.
• Julat Dalaman: Maintains connectivity up to 164 feet (50 meters) indoors.
• Full Stop and 1/10 Stop Power Control: Allows for precise power adjustments of connected flash units directly from the transmitter.
• Fungsi Wayarles: Eliminates the need for cumbersome PC sync cables, offering greater freedom of movement and setup flexibility.

3. Panduan Persediaan

Follow these steps to set up your Broncolor RFS 2.1 Transmitter:

1. Pasang Bateri: Open the battery compartment (usually located on the underside or side of the unit) and insert the required batteries, ensuring correct polarity. Close the compartment securely.
2. Mount on Camera: Slide the RFS 2.1 Transmitter onto your camera's hot shoe. Secure it by tightening the locking mechanism, if present, to prevent accidental dislodgement.
3. Hidupkan kuasa: Press and hold the power button until the indicator light illuminates, indicating the unit is active.
4. Pilih Saluran: Use the channel selection buttons or dial to choose a desired channel. Ensure this channel matches the channel set on your Broncolor flash units or receivers. Refer to your flash unit's manual for channel setting instructions.
5. Sambungan Ujian: Perform a test flash to confirm that the transmitter is communicating correctly with your flash units.

4. Operasi

Operating the Broncolor RFS 2.1 Transmitter is straightforward:

• Hidupkan/Mati Kuasa: Press and hold the power button to turn the transmitter on or off.
• Pemilihan Saluran: Use the designated buttons (e.g., '+' and '-' or a rotary dial) to cycle through the 40 available channels. Always ensure the transmitter and receiver are on the same channel.
• Pelarasan Kuasa: If your flash units support remote power control via the RFS 2.1 system, use the power adjustment buttons on the transmitter to increase or decrease the flash output in full or 1/10 stop increments.
• Butang Ujian: Press the test button to manually trigger the connected flash units without taking a picture. This is useful for checking light output and setup.
• Camera Shutter Release: When mounted on a camera's hot shoe, the transmitter will automatically trigger the flash units when the camera's shutter is released.

5. Penyelenggaraan

Proper maintenance ensures the longevity and reliable performance of your RFS 2.1 Transmitter:

• Pembersihan: Use a soft, dry, lint-free cloth to clean the exterior of the transmitter. For stubborn dirt, slightly dampen kain dengan air. Elakkan menggunakan bahan kimia yang keras atau bahan yang melelas.
• Penjagaan Bateri:
  • Tanggalkan bateri jika unit tidak akan digunakan untuk tempoh yang lama untuk mengelakkan kebocoran.
  • Gantikan bateri dengan segera apabila penunjuk bateri lemah muncul.
  • Gunakan hanya jenis bateri yang disyorkan.
• Storan: Store the transmitter in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. Use a protective pouch or case to prevent scratches and impact damage.
• Elakkan Kesan: The transmitter contains sensitive electronic components. Avoid dropping or subjecting it to strong impacts.

6. Penyelesaian masalah

If you encounter issues with your Broncolor RFS 2.1 Transmitter, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Broncolor customer support.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, technical support, or service inquiries regarding your Broncolor RFS 2.1 Transmitter, please contact Broncolor directly through their official website or authorized service centers. Keep your purchase receipt as proof of purchase for warranty claims.

You can find more information and contact details on the official Broncolor webtapak: www.broncolor.com