Utilitech Pro 24-inch 2-Speed High Velocity Fan User Manual

Maklumat Keselamatan Penting

Please read and understand all instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

• Sentiasa cabut plag kipas dari salur keluar kuasa sebelum membersihkan, menservis atau mengalihkannya.
• Jangan kendalikan mana-mana kipas dengan kord atau palam yang rosak. Buang kipas atau kembalikan ke kemudahan servis yang dibenarkan untuk pemeriksaan dan/atau pembaikan.
• Jangan letakkan tali di bawah permaidani. Jangan tutup tali dengan permaidani, alas kaki atau penutup yang serupa. Susun tali jauh dari kawasan lalu lintas di mana ia tidak akan tersandung.
• Jangan masukkan atau benarkan jari atau objek asing memasuki sebarang pengudaraan atau bukaan ekzos kerana ini boleh menyebabkan kejutan elektrik atau kebakaran, atau merosakkan kipas.
• Do not use outdoors or on wet surfaces. This fan is designed for indoor use only.
• Letakkan kipas di atas permukaan yang stabil dan rata untuk mengelakkannya daripada terbalik.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kipas semasa operasi.

Kandungan Pakej

Carefully unpack your fan and ensure all items are present and in good condition. If any items are missing or damaged, contact customer support.

• Utilitech Pro 24-inch High Velocity Fan Unit
• Sturdy Floor Stand with Wheels
• Perkakasan Pemasangan (bolt, nat, pencuci)
• Manual Pengguna (dokumen ini)

Persediaan

Arahan Perhimpunan

Follow these steps to assemble your Utilitech Pro High Velocity Fan:

1. Carefully remove all packaging materials from the fan unit and the stand components.
2. Attach the fan head to the U-shaped floor stand using the provided bolts, nuts, and washers. Ensure the fan head is securely fastened and can pivot smoothly within the stand.
3. Attach the wheels to the designated points on the base of the floor stand. These wheels allow for easy portability of the fan.
4. Ensure all connections are tight and secure before plugging in the fan.

An image of the fully assembled Utilitech Pro 24-inch 2-Speed High Velocity Fan, showcasing its black metal frame, large circular fan head with a protective grille, and a sturdy base with wheels for portability.

Arahan Operasi

Kawalan

The fan features a simple control knob located on the rear of the fan motor housing. This knob allows you to select between two speed settings.

Operasi

1. Letakkan kipas di atas permukaan yang kukuh dan rata.
2. Palamkan kord kuasa ke soket elektrik 120V AC standard.
3. Turn the control knob on the back of the fan to select your desired speed setting: '1' for low speed or '2' for high speed.
4. To turn off the fan, turn the control knob to the 'OFF' position.
5. Adjust the angle of the fan head by tilting it up or down to direct airflow as needed.

Penyelenggaraan

Pembersihan

Pembersihan tetap akan membantu mengekalkan prestasi kipas dan memanjangkan jangka hayatnya.

• Sentiasa cabut plag kipas sebelum membersihkan.
• Gunakan yang lembut, damp kain untuk mengelap permukaan luar kipas. Jangan gunakan pembersih atau pelarut yang melelas.
• To clean the fan blades, carefully remove the front grille (refer to assembly instructions for reverse steps if necessary). Wipe the blades with a soft cloth. Ensure the blades are dry before reattaching the grille.
• Jangan rendam kipas di dalam air atau biarkan air menitis ke dalam perumahan motor.

Penyimpanan

When not in use, store the fan in a cool, dry place, away from direct sunlight and moisture. It is recommended to cover the fan to protect it from dust.

Menyelesaikan masalah

If you experience issues with your fan, refer to the table below for common problems and solutions.

Spesifikasi

Waranti dan Sokongan

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Utilitech webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.