1. Pengenalan
This manual provides detailed instructions for the safe and correct installation, operation, and maintenance of your new ILIFE PX-B010 Li-ion Battery Power Pack. Please read this manual thoroughly before attempting to replace the battery in your ILIFE robotic vacuum cleaner. Proper installation ensures optimal performance and extends the lifespan of your device.
2. Maklumat Keselamatan
Observe the following safety precautions to prevent damage to the battery, the vacuum cleaner, or personal injury:
- Jangan buka, buka atau carik pek bateri.
- Jangan dedahkan bateri kepada haba atau api. Elakkan penyimpanan di bawah cahaya matahari langsung.
- Do not short-circuit the battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
- Jangan keluarkan pek bateri daripada pembungkusan asalnya sehingga diperlukan untuk digunakan.
- Jangan biarkan pek bateri terkena kejutan mekanikal.
- Sekiranya bateri bocor, jangan biarkan cecair bersentuhan dengan kulit atau mata. Jika telah terkena, basuh kawasan yang terjejas dengan air yang banyak dan dapatkan nasihat perubatan.
- Jangan gunakan sebarang pengecas selain daripada yang disediakan khusus untuk digunakan dengan peralatan.
- Dispose of the battery pack properly according to local regulations.
3. Produk Lebihview
The ILIFE PX-B010 is a high-quality Li-ion replacement battery designed to restore the cleaning performance of your compatible ILIFE robotic vacuum cleaner. It provides reliable power for extended cleaning sessions.
Image: The ILIFE PX-B010 Li-ion Battery Power Pack, showing its blue casing and connector wires.
3.1 Keserasian
This battery is compatible with the following ILIFE robotic vacuum cleaner models:
- ILIFE V3s Pro
- ILIFE V5s Pro
- ILIFE V8s
Nota: This battery is bukan compatible with ILIFE A9, A7, or A4s models.
3.2 Kandungan Pakej
- 1 x ILIFE PX-B010 Li-ion Battery Power Pack
4. Pemasangan
Follow these steps carefully to replace the battery in your ILIFE robotic vacuum cleaner. Ensure the vacuum is powered off and disconnected from its charging base before beginning.
Image: Visual guide illustrating the four steps of the battery replacement process for the ILIFE robotic vacuum cleaner.
4.1 Step-by-Step Replacement
- Disassemble the Battery Cover: Locate the screw on the battery cover at the bottom of your robotic vacuum. Use a screwdriver to loosen and remove the screw, then carefully lift off the battery cover.
- Putuskan sambungan Bateri Lama: Gently disconnect the wire connector of the old battery from the vacuum's port. Carefully remove the old battery from its compartment.
- Connect the New Battery: Take the new ILIFE PX-B010 battery. Connect its wire to the corresponding port inside the vacuum. Ensure the connection is secure. Perhatian: The red wire of the vacuum should be connected with the red wire of the battery. Incorrect connection (e.g., black wire to red wire) can cause damage.
- Assemble the Battery Cover: Place the new battery into the compartment. Align the battery cover and secure it with the screw you removed in Step 1.
5. Arahan Operasi
After installing the new battery, follow these guidelines for optimal performance.
5.1 Pengecasan Awal
For the first use, place your robotic vacuum on its charging base and allow it to charge completely. A full charge typically takes several hours. Refer to your vacuum cleaner's original manual for specific charging indicators.
5.2 Penggunaan Biasa
Once fully charged, your robotic vacuum is ready for operation. The new battery should provide extended run times. Always return the vacuum to its charging base after each cleaning cycle to ensure it is ready for the next use.
6. Penyelenggaraan
Proper maintenance of your battery can significantly extend its lifespan.
6.1 Penjagaan Bateri
- Elakkan menyahcas sepenuhnya bateri dengan kerap.
- Keep the vacuum and battery away from extreme temperatures (both hot and cold).
- Ensure the charging contacts on both the vacuum and the charging base are clean.
6.2 Penyimpanan
If you plan not to use your robotic vacuum for an extended period, fully charge the battery before storing it. Store the vacuum in a cool, dry place. It is recommended to charge the battery every 3-6 months to prevent deep discharge.
7. Penyelesaian masalah
If you encounter issues after battery replacement, refer to the table below:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Vacuum does not power on after battery replacement. | Battery not connected properly or not charged. | Check battery connection (ensure red wire to red wire). Place vacuum on charging base for initial charge. |
| Short run time after charging. | Battery not fully charged or incorrect charging procedure. | Ensure vacuum is charging correctly. Allow for a full charge cycle. If issue persists, contact support. |
| Vacuum beeps continuously. | Indicates a battery or charging error. | Verify battery connection. Clean charging contacts. Refer to your vacuum's original manual for specific error codes. |
8. Spesifikasi
Technical specifications for the ILIFE PX-B010 Li-ion Battery Power Pack:
| Ciri | Spesifikasi |
|---|---|
| Jenis Bateri | Li-ion |
| Voltage | 14.4V |
| Kapasiti | 2600 mAh |
| Nombor Model | ILIFEBP03 / PX-B010 |
| Berat badan | 190 Gram |
9. Waranti dan Sokongan
ILIFE provides customer support for its products. For warranty information, please refer to the documentation included with your original robotic vacuum cleaner or contact ILIFE customer service directly.
Maklumat Hubungan 9.1
- Khidmat Pelanggan AS: 1-800-631-9676 (Mon-Fri: 9:00 AM - 5:00 PM CST)
- Sokongan E-mel AS: support@iliferobot.com
- rasmi Webtapak: www.iliferobot.com
- Wilayah lain: Please refer to the product packaging or official webtapak untuk butiran hubungan serantau.