1. Pengenalan
This manual provides detailed instructions for the proper use, setup, operation, maintenance, and troubleshooting of the INSIZE ISH-DSA Digital Shore Durometer, Shore A. This precision instrument is designed for measuring the hardness of soft plastics, soft rubber, and similar materials. Adhering to the guidelines in this manual will ensure accurate measurements and prolong the life of your device.
Perihalan Imej: Gambar secara dekat view of the INSIZE ISH-DSA Digital Shore Durometer, Shore A. The device features a digital display showing a reading of "64.4" with average and standard deviation values. Below the display is the "INSIZE" logo and a control panel with power, up, down, and OK buttons. The measurement probe extends from the bottom of the device.
2. Maklumat Keselamatan
- Always handle the durometer with care to prevent damage.
- Elakkan mendedahkan peranti kepada suhu ekstrem, kelembapan tinggi atau persekitaran yang menghakis.
- Do not attempt to disassemble the unit, as this will void the warranty and may cause damage.
- Jauhkan peranti daripada medan magnet yang kuat.
- Ensure the test surface is stable and secure to prevent accidents during measurement.
3. Komponen Produk
The INSIZE ISH-DSA Digital Shore Durometer package typically includes:
- INSIZE ISH-DSA Digital Shore Durometer
- Sarung simpanan pelindung
- Manual Pengguna (dokumen ini)
- Calibration block (optional accessory, may be sold separately)
4. Persediaan
Follow these steps to prepare your durometer for first use:
- Membongkar: Carefully remove the durometer from its packaging. Inspect the device for any visible damage that may have occurred during shipping.
- Pemasangan Bateri: Locate the battery compartment (usually on the back or side). Open it and insert the required batteries (e.g., AAA, specific type not provided in product data), ensuring correct polarity as indicated inside the compartment. Close the compartment securely.
- Hidupkan kuasa: Press the power button (often marked with a power symbol or 'ON/OFF') on the control panel to turn on the device.
- Semakan Paparan Awal: The digital display should illuminate and show a reading, typically "0.0" or a previous measurement. If the display does not light up, check the battery installation or replace the batteries.
5. Arahan Operasi
The INSIZE ISH-DSA Digital Shore Durometer is specifically designed for measuring Shore A hardness, suitable for soft materials.
5.1. Prosedur Pengukuran Asas
- Sediakan Sample: Ensure the test material (soft plastic, soft rubber, etc.) is flat, smooth, and has a minimum thickness of 6mm. The sample should be at a stable temperature, ideally between 20-25°C (68-77°F).
- Position Durometer: Hold the durometer firmly and vertically above the test sample. Ensure the presser foot is parallel to the samppermukaannya.
- Kenakan Tekanan: Slowly and steadily apply pressure to the durometer until the entire presser foot is in full contact with the sample. The indenter should penetrate the material. Avoid sudden impacts or lateral movements.
- Baca Pengukuran: Observe the digital display. The reading will stabilize, indicating the Shore A hardness value. The device has a resolution of 0.1 Ha.
- Rekod Data: Note down the measurement. For accurate results, take multiple readings (at least 5) at different points on the sample, ensuring each measurement point is at least 6mm from any other measurement or edge. Calculate the average for a representative value.
5.2. Ciri Lanjutan
- Julat Pengukuran: The device accurately measures within a range of 0 to 100 Ha.
- Matikan Automatik: To conserve battery life, the durometer features an automatic power-off function after a period of inactivity.
- Kesambungan Tanpa Wayar: This model supports wireless connection to a printer for convenient data output. Refer to the printer's manual for specific pairing and operation instructions.
- Handhold or Test Stand Use: The device can be used handheld for quick checks or mounted on an optional test stand (not included) for more consistent and repeatable measurements, especially when testing softer materials or requiring precise force application.
6. Penyelenggaraan
Proper maintenance ensures the longevity and accuracy of your durometer.
- Pembersihan: Wipe the durometer body with a soft, dry, lint-free cloth. Do not use solvents, alcohol, or abrasive cleaners, as these can damage the display or casing.
- Indenter Care: Keep the indenter tip clean and free from debris, dust, or residue from test samples. Avoid touching the tip with bare hands to prevent oil transfer. Use a soft brush or compressed air if necessary.
- Storan: Store the durometer in its protective case in a dry, dust-free environment when not in use. Avoid areas with extreme temperature fluctuations or high humidity.
- Penggantian Bateri: Replace batteries promptly when the low battery indicator appears on the display. If the device will not be used for an extended period (e.g., more than one month), remove the batteries to prevent leakage and potential damage.
- Penentukuran: Regular calibration by a qualified technician or an accredited laboratory is highly recommended to ensure the continued accuracy of the instrument, especially for critical measurement applications or after significant use.
7. Penyelesaian masalah
This section addresses common issues you might encounter with your durometer.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan | Bateri mati atau tidak dipasang dengan betul | Check battery polarity, replace batteries with fresh ones. |
| Inconsistent or fluctuating readings | Tidak wajar sample preparation; inconsistent pressure application; dirty indenter; unstable test surface | Memastikan sample is flat, smooth, and thick enough; apply steady, vertical pressure; clean indenter tip; use a stable test platform. |
| Display shows "Err" or abnormal values | Measurement out of range; device malfunction; environmental interference | Power off and on again; ensure measurement is within the 0-100 Ha range; move away from strong electromagnetic fields. If issue persists, contact support. |
| Wireless printer connection failure | Printer not paired; printer out of range; printer battery low | Refer to printer manual for pairing; ensure devices are within range; check printer battery. |
8. Spesifikasi
Key technical specifications for the INSIZE ISH-DSA Digital Shore Durometer:
| Ciri | Perincian |
|---|---|
| Model | ISH-DSA |
| taip | Digital Shore Durometer, Shore A |
| Bahan Ujian | Soft plastic, soft rubber, etc. |
| Julat Pengukuran | 0~100 Ha |
| Resolusi | 0.1 Ha |
| Pematuhan Piawaian | According to ISO868, ISO7619, ASTM D 2240 |
| Ciri Kuasa | Matikan kuasa automatik |
| Ketersambungan | Wireless to printer |
| Kaedah Penggunaan | Handhold use or work with test stand |
| Dimensi Pakej | 12.83 x 11.42 x 3.78 inci |
| Berat Barang | 1 paun |
| Pengeluar | INSIZE |
| Tarikh Mula-mula Tersedia | 4 Jun 2016 |
9. Waranti dan Sokongan
For detailed warranty information, technical support, and service inquiries, please refer to the official INSIZE website or contact your authorized INSIZE dealer. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance or to explore other INSIZE products, you may visit the INSIZE brand page on Amazon.
10. Pelupusan
This product contains electronic components and batteries. Do not dispose of it with general household waste. Please follow local regulations for the proper recycling and disposal of electronic waste and batteries to protect the environment.