Manual Arahan Lekapan Siling Sumber Projek

1. Produk Lebihview

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Semi-Flushmount Ceiling Fixture. Designed for indoor use, this fixture features a white finish and an elegant etched frosted glass shade, providing diffused light suitable for various living spaces.

Image 1.1: The Project Source Semi-Flushmount Ceiling Fixture, showcasing its white base and decorative etched frosted glass shade.

2. Maklumat Keselamatan

Sila baca dan fahami semua arahan sebelum memulakan pemasangan. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau bahaya lain yang boleh menyebabkan kecederaan atau kerosakan harta benda.

• AMARAN: Untuk mengelakkan kejutan elektrik, putuskan bekalan elektrik pada pemutus litar atau kotak fius sebelum pemasangan.
• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC). Rujuk juruelektrik bertauliah jika anda tidak biasa dengan pendawaian elektrik.
• Jangan pasang lekapan ini di tempat basah atauamp lokasi.
• Kendalikan komponen kaca dengan berhati-hati bagi mengelakkan kerosakan dan kecederaan.
• Pastikan lekapan dipasang dengan kukuh pada elemen struktur siling.
• Gunakan hanya jenis dan wattage mentol yang dinyatakan untuk lekapan ini.

3. Kandungan Pakej

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

• Semi-Flushmount Ceiling Fixture Body (1)
• Etched Frosted Glass Shade (1)
• Mounting Hardware Kit (includes screws, wire nuts, mounting bracket) (1 set)
• Decorative Finial (1)
• Instruction Manual (this document) (1)

4. Persediaan dan Pemasangan

Alat yang Diperlukan (tidak termasuk): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.

1. Matikan Kuasa: Locate the circuit breaker or fuse box that controls the power to the light fixture you are replacing or installing. Turn off the power completely. Verify power is off using a voltage penguji.
2. Sediakan Pemasangan: If replacing an existing fixture, carefully remove it. Attach the mounting bracket (if not pre-attached) to the electrical junction box in the ceiling using the provided screws. Ensure the bracket is secure.
3. Sambungan Wayar:
   • Sambungkan hitam wayar dari lekapan ke hitam wayar (panas) dari kotak simpang menggunakan nat dawai.
   • Sambungkan putih wayar dari lekapan ke putih wayar (neutral) dari kotak simpang menggunakan nat dawai.
   • Sambungkan green or bare copper ground wire from the fixture to the tanah wayar dari kotak simpang (atau ke skru tanah hijau pada pendakap pelekap) menggunakan nat wayar.
   • Berhati-hati masukkan semua wayar ke dalam kotak simpang.
4. Attach Fixture Body: Align the fixture body with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the ceiling and stable.
5. Pasang Mentol: Insert the recommended type and wattage of light bulbs (not included) into the sockets. Do not exceed the maximum wattage ditunjukkan pada lekapan.
6. Pasang Teduh Kaca: Carefully place the etched frosted glass shade onto the fixture body. Secure it in place using the decorative finial by screwing it onto the threaded rod at the bottom of the fixture until snug. Do not overtighten.
7. Pulihkan Kuasa: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box. Test the light fixture.

5. Arahan Operasi

This Project Source ceiling fixture is designed for simple operation. Once properly installed and powered, it can be controlled via a standard wall switch. If your electrical setup includes a dimmer switch, ensure it is compatible with the type of bulbs you are using.

The product specifications indicate a "Remote" control method. If your specific model includes a remote control, please refer to the separate remote control instructions for pairing and operation. Otherwise, the fixture operates solely via the wall switch.

6. Penyelenggaraan

Regular maintenance will help preserve the appearance and functionality of your ceiling fixture.

• Pembersihan: Always turn off power to the fixture and allow it to cool before cleaning. Wipe the fixture body with a soft, dry cloth. For the glass shade, use a mild glass cleaner applied to a cloth (not directly to the glass) and wipe gently. Do not use abrasive cleaners or solvents.
• Penggantian mentol: Ensure power is off and bulbs are cool before attempting to replace them. Unscrew the decorative finial and carefully remove the glass shade. Replace old bulbs with new ones of the correct type and wattage. Reattach the glass shade and finial.

7. Penyelesaian masalah

Jika anda menghadapi masalah dengan lekapan anda, rujuk masalah dan penyelesaian biasa berikut:

If the problem persists after attempting these solutions, consult a qualified electrician or contact customer support.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation included with your purchase or contact Project Source customer service. Keep your purchase receipt for warranty claims.

For further assistance, you may visit the manufacturer's website or contact their support line. Contact details are typically found on the product packaging or the manufacturer's official webtapak.