Manual Pengguna Pemain Rakaman Meja Putar Vinil Fluance RT81 Elite High Fidelity

pengenalan

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Fluance RT81 Elite High Fidelity Vinyl Turntable. Please read this manual thoroughly before using your turntable to ensure proper function and longevity.

The Fluance RT81 is designed to deliver a pure analog listening experience with premium components, including an Audio Technica AT95E cartridge, a belt-drive system, and a high-mass MDF wood plinth for superior vibration isolation.

Apa yang Termasuk

Sahkan bahawa semua komponen terdapat dalam pembungkusan:

• RT81 Turntable Unit
• Penutup Habuk
• 45 Penyesuai
• Tikar Pinggan Getah
• 3ft RCA Cable with Ground Wire
• 100V - 240V (50/60Hz) AC Power Adapter
• Panduan Mula Pantas
• Audio Technica AT95E Cartridge (pre-installed on headshell)
• Kaunter berat badan
• Hinges (x2)
• Tali pinggang getah

Image: All components included with the Fluance RT81 turntable, including the plinth, aluminum platter, platter mat, headshell & AT95E cartridge, dust cover, hinges, RCA cable, 45 adapter, counterweight, 5ft power adapter, and rubber belt.

Persediaan

1. Membongkar dan Meletakkan

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.

Image: The Fluance RT81 turntable in its walnut finish, with the clear dust cover open, showcasing pinggan dan lengan nada.

2. Pemasangan Pinggan dan Tali Pinggang

1. Place the aluminum platter onto the spindle.
2. Carefully loop the rubber belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
3. Place the rubber platter mat on top of the aluminum platter.

Imej: Dari dekat view of the Fluance RT81 turntable's tonearm, highlighting the Audio Technica AT95E cartridge with its green stylus.

3. Persediaan Tonearm

The Audio Technica AT95E cartridge is pre-installed on the headshell. You will need to balance the tonearm and set the tracking force.

1. Pasang pemberat pengimbang pada bahagian belakang tonearm.
2. Laraskan pemberat balas sehingga lengan atas seimbang dan terapung secara mendatar.
3. Set the tracking force to the recommended 2.0 grams by rotating the counterweight.
4. Set the anti-skating control to '2' to match the tracking force.

4. Menyambung ke Sistem Audio

The RT81 features a built-in Texas Instruments preamp, offering flexibility in connection options.

• Using Built-in Preamp: Set the PHONO/LINE switch on the back of the turntable to TALIAN. Connect the RCA cables from the turntable's AUDIO OUTPUT to any available line-level input (e.g., AUX, CD) on your amplifier or powered speakers. The ground wire is not needed in this configuration.
• Using External Preamp: Set the PHONO/LINE switch on the back of the turntable to FON. Connect the RCA cables from the turntable's AUDIO OUTPUT to the PHONO input on your external preamp or receiver. Connect the ground wire from the turntable's ground post to the ground terminal on your external preamp/penerima.

Image: Rear panel of the Fluance RT81 turntable, displaying the RCA audio output jacks, ground terminal, PHONO/LINE switch, AUTO STOP switch, and DC 12V power input.

5. Sambungan Kuasa

Connect the AC power adapter to the DC 12V input on the back of the turntable, then plug it into a wall outlet.

Arahan Operasi

1. Memainkan Rekod

1. Place a record on the platter mat. For 7-inch singles, use the included 45 adapter.
2. Select the appropriate speed (33 or 45 RPM) using the selector dial on the front left.
3. Angkat lengan atas menggunakan tuil isyarat.
4. Manually position the tonearm over the desired starting groove of the record.
5. Turunkan tonearm perlahan-lahan menggunakan tuil isyarat. Rakaman akan mula dimainkan.

2. Auto Stop Function

The RT81 features an auto-stop function. When enabled (AUTO STOP switch set to ON), the platter will automatically stop spinning once the tonearm reaches the end of the record. If disabled (AUTO STOP switch set to OFF), the platter will continue to spin until manually stopped.

3. Menghentikan Main Semula

1. Angkat lengan atas menggunakan tuil isyarat.
2. Kembalikan tonearm ke tempat rehatnya.
3. Turn the speed selector dial to "OFF" to stop the platter.

Penyelenggaraan

1. Membersihkan Meja Putar

Regular cleaning will help maintain the performance and appearance of your RT81.

• Use a soft, dry cloth to wipe the plinth and dust cover. Avoid abrasive cleaners.
• Gently brush the stylus with a soft brush in a back-to-front motion to remove dust.
• Clean records regularly with a carbon fiber brush or record cleaning solution to prevent dust buildup and improve sound quality.

2. Penggantian Tali Pinggang

The drive belt may need replacement over time due to wear. Refer to the "What's Included" section for the location of the belt and instructions for re-installation.

Menyelesaikan masalah

Spesifikasi

• model: RT81 Elite
• Jenama: Fluance
• Dimensi (L x W x H): 13.75 x 16.5 x 5.5 inci
• Berat Barang: 14.1 paun
• Plinth Material: Kayu MDF
• Pinggan: aluminium
• Kartrij: Audio Technica AT95E (Elliptical Stylus)
• Sistem Pemacu: Pemacu Belt
• Kelajuan: 33 1/3, 45 RPM
• Praamp: Built-in Texas Instruments Preamp (switchable PHONO/LINE)
• Ketersambungan: Wired RCA Output with Ground Terminal
• Auto Stop: Yes (switchable ON/OFF)
• warna: kenari

Imej: Overhed view of the Fluance RT81 turntable with a record spinning, demonstrating its operational state.

Waranti & Sokongan

Your Fluance RT81 turntable comes with a Waranti Pengeluar 2 Tahun. For warranty claims or technical support, please contact Fluance customer service directly.

Sokongan Pelanggan Sepanjang Hayat is also provided by Fluance to assist with any questions or issues you may encounter with your turntable.

For additional resources, including detailed setup videos and FAQs, please visit the official Fluance website or refer to the included Quick Start Guide.

Image: The Fluance company logo, "FLUANCE. Serious Performance."