Crosley C200 Direct-Drive Turntable Instruction Manual

pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Arahan Keselamatan Penting

• Baca semua arahan sebelum digunakan.
• Simpan manual ini untuk rujukan masa hadapan.
• Jangan gunakan alat ini berhampiran air.
• Bersihkan hanya dengan kain kering.
• Jangan sekat sebarang bukaan pengudaraan. Pasang mengikut arahan pengilang.
• Jangan pasang berhampiran mana-mana sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
• Lindungi kord kuasa daripada berjalan atau tersepit, terutamanya pada palam, bekas kemudahan dan tempat keluar dari radas.
• Hanya gunakan lampiran/aksesori yang ditentukan oleh pengilang.
• Cabut plag radas ini semasa ribut petir atau apabila tidak digunakan untuk jangka masa yang lama.
• Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan. Servis diperlukan apabila radas telah rosak dalam apa jua cara, seperti kord bekalan kuasa atau palam rosak, cecair telah tertumpah atau objek jatuh ke dalam radas, radas telah terdedah kepada hujan atau lembapan, tidak beroperasi seperti biasa. , atau telah digugurkan.

Kandungan Pakej

Pastikan semua barang yang disenaraikan di bawah disertakan dalam pakej anda:

• Crosley C200 Direct Drive Turntable
• Manual Pengguna (dokumen ini)
• Penutup Habuk
• Pinggan dengan Tali Pinggang Pemacu
• Felt Slip Mat
• Kaunter berat badan
• Head Shell with Audio-Technica Magnetic Cartridge
• Penyesuai 45 RPM
• Kabel Output RCA

Komponen Lebihview

Familiarize yourself with the main components of your turntable.

Persediaan

1. Pemasangan Pinggan dan Tali Pinggang Pemacu

1. Letakkan pinggan dengan berhati-hati di atas gelendong tengah.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Place the felt slip mat on top of the platter.

2. Tone Arm Assembly and Balancing

1. Pasang Penimbang: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Tanggalkan Pelindung Stilus: Gently remove the clear plastic stylus protector from the cartridge.
4. Buka Kunci Lengan Nada: Release the tone arm from its rest using the tone arm lock.
5. Balance Tone Arm: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Tetapkan Pasukan Penjejakan: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Tetapkan Anti-Luncur: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. Menyambung ke Sistem Audio

1. Connect the RCA output cables from the turntable to your amppembesar atau pembesar suara berkuasa.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • FON: Use if your amplifier has a dedicated phono input.
   • BARIS: Use if your amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Sambungkan penyesuai kuasa ke meja putar dan kemudian ke soket dinding.

Arahan Operasi

1. Memainkan Rekod

1. Letakkan rekod di atas platter. Jika memainkan single 45 RPM, gunakan penyesuai 45 RPM yang disertakan.
2. Select the correct speed (33 1/3 or 45 RPM) using the speed selector switch.
3. Unlock the tone arm from its rest.
4. Lift the cueing lever to raise the tone arm.
5. Manually position the tone arm over the desired starting groove of the record.
6. Gently lower the cueing lever to allow the stylus to descend onto the record.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Pastikan meja putar dihidupkan.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Cari untuk "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/amplebih hidup.

Nota: The Bluetooth feature is for receiving audio kepada the turntable, not for transmitting audio daripada the turntable to Bluetooth speakers.

Penyelenggaraan

1. Membersihkan Stylus

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Membersihkan Meja Putar

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Menyelesaikan masalah

Spesifikasi

• model: C200A-BK
• Jenama: Crosley
• Jenis Drive: Pemanduan Terus
• Motor: Tork tinggi
• Kelajuan: 33 1/3, 45 RPM
• Operasi: Manual sepenuhnya
• Lengan Nada: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Kartrij: Audio-Technica Magnetic Cartridge
• pra-amplebih hidup: Built-in switchable phono pre-amplebih hidup
• Keluaran: Detachable RCA output cables
• Pinggan: Damped die-cast aluminum with felt slip mat
• Ciri Khas: Penerima Bluetooth Terbina Dalam
• Bahan: Aluminum (platter), Black finish
• Dimensi Produk: 11.02 x 17.72 x 5.47 inci
• Berat Barang: 11.02 paun
• Peranti Serasi: Penceramah, Amppenguat, Penerima AV

Waranti dan Sokongan

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Pengeluar: Crosley

Tarikh Mula-mula Tersedia: 22 Disember 2015

Video Produk Rasmi