HyperX Savage DDR4 Memory Module User Manual

pengenalan

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Imej: Depan view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Persediaan dan Pemasangan

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Persediaan

1. Pemeriksaan Keserasian: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Matikan: Matikan komputer anda sepenuhnya dan cabut kabel kuasa.
3. Kes Terbuka: Open your computer's side panel to access the motherboard.

2. Pemasangan Modul

1. Cari Slot DIMM: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Buka Klip: Gently push down the retention clips at both ends of the DIMM slot.
3. Align Module: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Sisipkan Modul: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Ulang: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Imej: Bersudut view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Selepas Pemasangan

1. Tutup Kes: Pasang semula panel sisi casing komputer anda.
2. Sambung semula Kuasa: Plug the power cable back into your computer and power it on.

Arahan Operasi

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Mendayakan XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) profiles. Pro inifiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. Akses BIOS/UEFI: Semasa sistem dimulakan, berulang kali tekan kekunci yang ditetapkan (biasanya DEL, F2, F10, atau F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. Locate XMP Setting: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Dayakan Profile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Simpan dan keluar: Simpan perubahan dan keluar dari BIOS/UEFI. Sistem anda akan dimulakan semula dengan tetapan memori baharu yang digunakan.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Penyelenggaraan

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Jaga kebersihan: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Pengendalian yang betul: When handling memory modules, always hold them by the edges to avoid touching the gold contacts or the integrated circuits.
• Kawalan Suhu: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Menyelesaikan masalah

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• Sistem Tidak Boot:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Cuba but dengan hanya satu modul yang dipasang untuk mengenal pasti modul yang mungkin rosak.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile didayakan.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Ketidakstabilan atau Ranap Sistem:
  • Jalankan alat diagnostik memori (cth, Windows Memory Diagnostic atau MemTest86) untuk menyemak ralat.
  • Ensure your power supply unit (PSU) provides sufficient and stable power to all components.
  • Check for proper cooling within your system to prevent overheating.

Spesifikasi

Waranti dan Sokongan

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webtapak atau hubungi perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk pengesahan waranti.

HyperX Support: www.hyperx.com/support