DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

pengenalan

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Maklumat Keselamatan Penting

• Baca arahan ini dengan teliti sebelum mengendalikan produk ini.
• Simpan arahan ini untuk rujukan masa hadapan.
• Patuhi semua amaran pada produk dan dalam arahan pengendalian.
• Ikut semua arahan.
• Jangan gunakan alat ini berhampiran air.
• Bersihkan hanya dengan kain kering.
• Jangan sekat sebarang bukaan pengudaraan. Pasang mengikut arahan pengilang.
• Jangan pasang berhampiran mana-mana sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
• Hanya gunakan lampiran/aksesori yang ditentukan oleh pengilang.
• Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan. Servis diperlukan apabila radas telah rosak dalam apa jua cara, seperti kord bekalan kuasa atau palam rosak, cecair telah tertumpah atau objek jatuh ke dalam radas, radas telah terdedah kepada hujan atau lembapan, tidak beroperasi seperti biasa. , atau telah digugurkan.

Kandungan Pakej

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Manual Arahan (dokumen ini)

Jika terdapat sebarang barang yang hilang atau rosak, sila hubungi peruncit anda dengan segera.

Persediaan

Penempatan Pembesar suara

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Jarak dari Dinding: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Ketinggian: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Segitiga Stereo: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Jari ke dalam: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

Imej: Depan view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Imej: Depan view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Menyambung ke an Amplebih hidup

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Matikan: Pastikan anda amplifier is turned off and unplugged from the power outlet before making any connections.
2. Kabel Pembesar Suara: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Kekutuban: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Sambungan Selamat: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Imej: Belakang view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Mengendalikan Pembesar Suara Anda

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Hidupkan kuasa: Pasang dan hidupkan anda amplebih hidup.
• Kawalan Kelantangan: Mulakan dengan amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Tempoh Pecah Masuk: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Panggangan: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Penyelenggaraan

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Pembersihan: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Panggangan: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Elakkan Cahaya Matahari Terus dan Haba: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Kelembapan: Keep the speakers away from excessive moisture or humidity.
• Perlindungan Pemandu: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Menyelesaikan masalah

Jika anda menghadapi masalah dengan pembesar suara anda, rujuk masalah dan penyelesaian biasa berikut:

• Tiada Bunyi:
  • Memastikan amplifier is powered on and connected correctly.
  • Check all speaker cable connections at both the amplifier and the speakers for secure contact and correct polarity.
  • Verify the correct input source is selected on your amplebih hidup.
  • Confirm the volume is turned up on the amplebih hidup.
• Bunyi Herot:
  • Kurangkan tahap kelantangan pada anda amplifier. Overdriving the speakers can cause distortion.
  • Periksa sambungan kabel pembesar suara untuk sebarang helai longgar atau litar pintas.
  • Memastikan amplifier's power output is suitable for the speakers (refer to specifications).
  • Periksa sumber audio untuk herotan.
• Bass lemah:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Uneven Soundstage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Spesifikasi

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Waranti dan Sokongan

Maklumat Waranti

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTY. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO webtapak.

Sokongan Pelanggan

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webtapak untuk bantuan lanjut.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.