pengenalan
This manual provides instructions for the safe and effective operation and maintenance of your INSIZE 1108-150 Electronic Caliper. Please read this manual thoroughly before use and retain it for future reference.
Rajah 1: Depan view of the INSIZE 1108-150 Electronic Caliper, showing the digital display, measurement jaws, and control buttons.
Produk Selesaiview
The INSIZE 1108-150 is a precision electronic caliper designed for accurate dimensional measurements. It features a clear digital display and is constructed from durable stainless steel.
Ciri-ciri Utama:
- Measurement Range: 0-6 inches / 0-150 mm
- Resolusi: 0.0005 inci / 0.01 mm
- Accuracy: ±0.0008 inches
- Fungsi mematikan kuasa automatik
- Inch/millimeter conversion
- Zero setting at any position
- Data output capability
- Pembinaan keluli tahan karat
Rajah 2: Technical diagram illustrating the INSIZE 1108-150 Electronic Caliper's dimensions and key specifications.
Rajah 3: belakang view of the INSIZE 1108-150 Electronic Caliper, displaying the serial number and the battery compartment location.
Kandungan Pakej
Setelah membuka bungkusan, pastikan semua barang ada dan tidak rosak:
- INSIZE 1108-150 Electronic Caliper (Main Unit)
- Bateri CR2032 (dipasang atau disertakan secara berasingan)
- Hard Plastic Storage Case
- Manual Arahan Operasi
- Sijil Pemeriksaan
Rajah 4: The INSIZE 1108-150 Electronic Caliper, its instruction manual, and inspection certificate neatly stored within its protective hard plastic case.
Persediaan
Pemasangan Bateri
The caliper uses one CR2032 battery. If the display does not turn on or shows a low battery indicator, replace the battery.
- Locate the battery compartment cover on the digital unit (refer to Figure 3).
- Slide the cover open or use a small tool to gently pry it open.
- Remove the old battery, noting its polarity.
- Masukkan bateri CR2032 baharu dengan bahagian positif (+) menghadap ke atas.
- Tutup penutup petak bateri dengan selamat.
Rajah 5: The INSIZE 1108-150 Electronic Caliper alongside a CR2032 battery, indicating the battery type required for operation.
Arahan Operasi
Menghidupkan/Mematikan
- Untuk Menghidupkan: Press the "ON/OFF" button or simply move the digital unit along the beam.
- Untuk Mematikan: Press the "ON/OFF" button. The caliper will also automatically power off after a period of inactivity.
Tetapan Sifar
The zero point can be set at any position, allowing for incremental measurements.
- Close the measuring jaws completely for absolute zero, or position the jaws at your desired reference point.
- Press the "ZERO" button. The display will show "0.00" or "0.000".
Inch/Millimeter Conversion
To switch between inch and millimeter units:
- Press the "INCH/MM" button. The display will toggle between the two units.
Mengambil Ukuran
- Ensure the caliper is clean and the jaws are free of debris.
- Turn on the caliper and set the zero point as needed.
- Gently open the jaws and position the workpiece between the appropriate measuring surfaces (outside jaws for external dimensions, inside jaws for internal dimensions, or depth rod for depth measurements).
- Close the jaws until they make firm, but not excessive, contact with the workpiece.
- Baca ukuran terus dari paparan digital.
Rajah 6: A user demonstrating the measurement of an external diameter on a cylindrical metal part using the INSIZE 1108-150 Electronic Caliper.
Penyelenggaraan
Pembersihan
- Regularly clean the measuring surfaces and the beam with a clean, dry, lint-free cloth.
- Avoid using solvents or abrasive cleaners, as these can damage the display or measuring surfaces.
- Keep the digital unit dry. While the caliper is made of stainless steel, the electronic components are not waterproof.
Penyimpanan
- Store the caliper in its protective hard plastic case when not in use to prevent damage.
- Simpan di persekitaran yang kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
- Slightly open the jaws before storing to relieve tension on the measuring surfaces.
Rajah 7: The INSIZE 1108-150 Electronic Caliper resting securely within its custom-fit hard plastic storage case, ready for protection when not in use.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan tidak dihidupkan. | Bateri mati atau tidak dipasang dengan betul. | Gantikan bateri CR2032, memastikan kekutuban yang betul. |
| Bacaan yang tidak tepat atau turun naik. | Dirt/debris on measuring surfaces or beam; low battery; damaged sensor. | Clean the caliper thoroughly. Replace battery. If problem persists, contact support. |
| "ZERO" button not responding. | Button malfunction or electronic issue. | Ensure battery is fully charged. If problem persists, contact support. |
| Automatic power off not working. | Kerosakan elektronik. | Hubungi sokongan. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 1108-150 |
| Julat Pengukuran | 0-6 inci / 0-150 mm |
| Resolusi | 0.0005 inci / 0.01 mm |
| Ketepatan | ±0.0008 inches |
| bahan | Keluli Tahan Karat |
| Jenis Bateri | CR2032 (1 termasuk) |
| Fungsi | ON/OFF, ZERO, Inch/mm conversion, Data Output |
| Matikan Automatik | ya |
| Dimensi Produk | 10.28" L x 4.09" W x 1.3" H |
| Berat badan | 13.67 auns |
Rajah 8: A terperinci view of the INSIZE Inspection Certificate, confirming the calibration and accuracy of the Digital Caliper model 1108-150.
Waranti dan Sokongan
INSIZE products are manufactured to high standards and undergo strict quality control. For warranty information, technical support, or service, please refer to the contact details provided in the included warranty certificate or visit the official INSIZE webtapak.
INSIZE Contact Information:
- INSIZE USA: www.insize.com
- Refer to your product's specific warranty card for regional contact details.