Possini Euro Design Rivulet 18-inch Flush Mount Ceiling Light Instruction Manual

1. Maklumat Keselamatan Penting

Please read and understand all instructions before beginning assembly and installation. Failure to do so could lead to fire, electric shock, or other injuries.

• AMARAN: To avoid electric shock, ensure electricity is turned off at the main circuit breaker box before installation.
• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC).
• Consult a qualified electrician if you are unsure about wiring or installation procedures.
• Gunakan hanya jenis mentol yang disyorkan dan wattage dinyatakan dalam bahagian spesifikasi.
• Jangan pasang lekapan ini di lokasi yang basah. Sesuai untuk kegunaan dalaman sahaja.
• Keep combustible materials away from the light fixture when in operation.

2. Kandungan Pakej

Carefully unpack the fixture and check that all parts are present. Refer to the diagram below for identification.

• A. Pendakap Melekap
• B. Fixture Canopy
• C. Inner Drum Shade
• D. Wavy Spun Metal Frame
• E. Glass Diffuser
• F. Akhir
• G. Wire Nuts (3)
• H. Skru Pemasangan (2)
• I. Outlet Box Screws (2)
• J. Bulbs (not included)

Figure 1: Assembled Rivulet Flush Mount Ceiling Light. This image shows the complete light fixture with its antique silver leaf wavy spun metal frame, white drum shade, and glass diffuser, mounted flush against a ceiling.

3. Spesifikasi Produk

Figure 2: Detailed dimensions of the light fixture, showing an 18-inch width, 7.5-inch height, 5.5-inch canopy, and 15.75-inch inner shade width.

4. Arahan Pemasangan

Before you begin, ensure the power is turned off at the circuit breaker.

1. Sediakan Pendakap Pelekap:

   Attach the mounting bracket (A) to the outlet box in the ceiling using the provided outlet box screws (I). Ensure the bracket is securely fastened.

2. Buat Sambungan Elektrik:

   Connect the fixture's wires to the house wires:

   • Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut (G).
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut (G).
   • Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the outlet box, and to the mounting bracket (A) using a ground screw if available, then secure with a wire nut (G).

   Berhati-hati masukkan semua wayar ke dalam kotak keluar.

3. Attach the Fixture Canopy:

   Align the fixture canopy (B) with the mounting bracket (A) and secure it using the mounting screws (H). Ensure the canopy is flush against the ceiling.

   

   Rajah 3: Sebuah bersudut view of the installed light fixture, showing the antique silver leaf wavy metal frame and the white drum shade. This illustrates the fixture's appearance once mounted.

4. Pasang Mentol:

   Insert three E26 base bulbs (J, not included) into the sockets. Do not exceed the maximum wattage sebanyak 60 watt setiap mentol.

5. Attach Glass Diffuser and Finial:

   Place the glass diffuser (E) over the inner drum shade (C) and secure it by screwing the finial (F) onto the threaded rod at the center of the fixture. Tighten gently to avoid overtightening.

   

   Rajah 4: Gambar jarak dekat view of the central finial, which secures the glass diffuser to the light fixture. This component is crucial for the final assembly step.

6. Pulihkan Kuasa:

   Setelah pemasangan selesai, sambungkan semula kuasa pada pemutus litar utama.

5. Arahan Operasi

This light fixture operates via a standard wall switch (not included).

• Ensure the light fixture is properly installed and power is restored.
• Flip the wall switch to the "ON" position to illuminate the fixture.
• Flip the wall switch to the "OFF" position to turn off the fixture.

6. Penyelenggaraan

• Pembersihan:

  Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Penggantian mentol:

  Turn off the power at the circuit breaker. Allow bulbs to cool completely. Unscrew the finial (F) and carefully remove the glass diffuser (E). Unscrew the old bulbs and replace them with new E26 base bulbs, not exceeding 60 watts each. Reattach the glass diffuser and finial.

7. Penyelesaian masalah

8. Waranti dan Sokongan

This Possini Euro Design product is manufactured with quality materials and craftsmanship. For specific warranty details and customer support, please refer to the documentation included with your purchase or visit the official Possini Euro Design webtapak.

Pengeluar: Lamps Plus

Figure 5: The official logo for the Possini Euro Design Collection.