1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo JSWm 1AX-N self-priming electric water pump. Please read these instructions carefully before using the pump and keep this manual for future reference.
The Pedrollo JSWm 1AX-N is a self-priming electric pump designed for pumping water. This model is an updated version of the JSWM/1A series.
2. Maklumat Keselamatan
AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan renjatan elektrik, kebakaran, kecederaan serius atau kematian.
- Always disconnect the pump from the power supply before performing any maintenance or installation.
- Ensure the electrical supply matches the pump's specifications (220-230V, 50Hz).
- The pump must be properly grounded to prevent electric shock.
- Jangan kendalikan pam dengan kabel atau palam yang rosak.
- Do not pump flammable, explosive, or corrosive liquids. This pump is designed for water only.
- Jauhkan kanak-kanak dan kakitangan yang tidak dibenarkan daripada pam semasa operasi.
- Install the pump in a well-ventilated area, protected from direct sunlight and freezing temperatures.
3. Produk Lebihview
The Pedrollo JSWm 1AX-N is a robust self-priming pump. Key features include:
- Self-priming capability.
- Power: 0.75 kW (0.85 HP).
- Maximum flow rate: 55 liters/minute.
- Maximum head: 43 meters.
- Constructed with Noryl material.
Figure 1: Pedrollo JSWm 1AX-N Self-Priming Electric Water Pump. This image shows the overall view of the blue electric pump with its motor and pump housing.
Figure 2: Pedrollo JSWm 1AX-N Pump Rating Plate. This image displays the technical specifications label on the pump, including model number, power, voltage, frequency, and flow rates.
4. Persediaan dan Pemasangan
Pemasangan yang betul adalah penting untuk prestasi dan jangka hayat pam.
- Pemasangan: Securely mount the pump on a stable, level surface. Ensure adequate ventilation around the motor.
- Talian sedutan: Connect a rigid, airtight suction pipe to the pump's inlet. The suction line should be as short and straight as possible, with a foot valve at the end submerged in the water source. The pump can draw water from depths up to 9 meters.
- Delivery Line: Connect the delivery pipe to the pump's outlet. Install a check valve if the delivery line is long or has significant vertical lift.
- Penyebuan: Before first use, or if the pump runs dry, fill the pump body completely with water through the priming port until it overflows. Replace the priming plug securely.
- Sambungan Elektrik: Connect the pump to a dedicated 220-230V, 50Hz power supply. Ensure proper grounding. A qualified electrician should perform the electrical connection.
5. Arahan Operasi
- Permulaan permulaan: After priming, switch on the power supply. The pump should start drawing water and build pressure.
- Operasi Berterusan: Monitor the pump for unusual noises or vibrations. Ensure a continuous water supply to prevent dry running.
- Menutup: Turn off the power supply to stop the pump.
Nota: The pump is designed for continuous duty (thermally protected).
6. Penyelenggaraan
Penyelenggaraan yang kerap memastikan prestasi optimum dan memanjangkan jangka hayat pam.
- Pembersihan: Periodically clean the pump exterior to prevent dirt buildup.
- Musim sejuk: In freezing temperatures, drain all water from the pump and pipes to prevent damage. Store the pump in a frost-free environment.
- Pemeriksaan: Regularly check for leaks, damaged cables, or unusual wear. Address any issues promptly.
- Injap Kaki: Ensure the foot valve at the end of the suction line is clear of debris.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pam tidak bermula | No power supply; Motor overload; Damaged capacitor. | Check power connection and circuit breaker; Allow motor to cool; Consult a qualified technician. |
| Pam berjalan tetapi tiada air yang dihantar | Pump not primed; Air leak in suction line; Suction lift too high; Foot valve blocked. | Re-prime the pump; Check suction line for leaks; Reduce suction lift; Clean foot valve. |
| Aliran atau tekanan rendah | Partial blockage in suction/delivery line; Worn impeller; Air in system. | Check and clear lines; Consult technician for impeller replacement; Re-prime pump. |
| Bunyi atau getaran yang berlebihan | Cavitation (air in pump); Loose mounting; Worn bearings. | Ensure pump is fully primed and suction line is airtight; Secure mounting bolts; Consult a technician. |
8. Spesifikasi
| Spesifikasi | Nilai |
|---|---|
| Model | JSWm 1AX-N |
| Jenama | Pedrollo |
| Kuasa (HP) | 0.75 HP (P2 0.55 kW) |
| Voltage | 220-230 V |
| Kekerapan | 50 Hz |
| Semasa (Dalam) | 3.6 A |
| Max Flow Rate (Q) | 55 l/min |
| Max Head (H) | 43 m |
| bahan | Noryl |
| Berat badan | 10 kg (22.05 lbs) |
| Kelas Perlindungan | IP X4 |
| Kelas Penebat | F |
| Suhu Cecair Maks | 40 °C |
| Kitaran Tugas | Continuous duty (Thermally protected) |
9. Waranti dan Sokongan
For warranty information and technical support, please refer to the official Pedrollo website or contact your authorized Pedrollo dealer. Keep your purchase receipt as proof of purchase.
Pedrollo is a manufacturer based in San Bonifacio (VR) Italy. Contact information may be available on the product's rating plate or official documentation.
Nota: Maklumat ketersediaan alat ganti tidak disediakan dalam butiran produk.