Cooler Master RC-351-KKN2

Cooler Master CMP 351 Cabinet User Manual

Model: RC-351-KKN2

1. Produk Lebihview

The Cooler Master CMP 351 is a mid-tower computer cabinet designed for PC enthusiasts and builders. It features a robust construction and a design focused on efficient cooling and ease of access for component installation. This cabinet includes a pre-installed power supply (available in 350W, 400W, or 500W variants) located at the top.

Ciri-ciri utama termasuk:

  • Front panel with a grill design for enhanced airflow.
  • Stylish blue LED stripe integrated into the front panel.
  • Conveniently located front I/O panel for easy access to ports.
  • One pre-installed 120mm rear fan and side panel vents for effective cooling.
Depan view of the Cooler Master CMP 351 Cabinet

Rajah 1.1: Depan view of the Cooler Master CMP 351 Cabinet, showcasing the grill design and front I/O panel.

2. Persediaan dan Pemasangan

This section provides general guidelines for installing components into your Cooler Master CMP 351 Cabinet. Always refer to the specific manuals for your motherboard, power supply, and other components for detailed installation instructions.

2.1 Menyediakan Jemaah Menteri

  1. Place the cabinet on a stable, flat surface.
  2. Remove the side panel(s) by unscrewing the thumbscrews at the rear of the cabinet and sliding the panel backward.
Dalaman view of the Cooler Master CMP 351 Cabinet

Rajah 2.1: Dalaman view of the Cooler Master CMP 351 Cabinet, showing the motherboard tray and drive bays.

2.2 Pemasangan Bekalan Kuasa

The CMP 351 cabinet comes with a pre-installed power supply unit (PSU) located at the top of the chassis. Ensure all power cables are routed correctly and connected to your components.

  • Connect the 24-pin ATX power connector to your motherboard.
  • Connect the 4-pin or 8-pin CPU power connector to your motherboard.
  • Connect SATA power cables to your storage drives (HDDs/SSDs) and optical drives.
  • Connect PCIe power cables to your graphics card, if required.

2.3 Pemasangan Motherboard

  1. Install the I/O shield provided with your motherboard into the rear opening of the cabinet.
  2. Align the motherboard with the standoffs inside the cabinet. Ensure all standoffs match the screw holes on your motherboard.
  3. Selamatkan papan induk dengan skru.
belakang view of the Cooler Master CMP 351 Cabinet

Rajah 2.2: Belakang view of the Cooler Master CMP 351 Cabinet, showing the I/O shield cutout and expansion slots.

2.4 Drive Installation (HDD/SSD/Optical)

  • Install 3.5-inch hard drives into the designated drive bays. Secure them with screws or tool-less mechanisms if available.
  • Install 2.5-inch SSDs into dedicated SSD mounts or use adapters for 3.5-inch bays.
  • Install 5.25-inch optical drives into the front bays, securing them from the side.
  • Connect SATA data cables from your motherboard to each drive.

2.5 Sambungan Panel I/O Hadapan

Connect the front panel cables to the corresponding headers on your motherboard. These typically include:

  • Suis kuasa: For turning the system on/off.
  • Tetapkan semula Suis: For restarting the system.
  • LED kuasa: Indicates system power status.
  • LED HDD: Indicates hard drive activity.
  • USB 2.0/3.0: For front USB ports.
  • Audio HD: For front headphone and microphone jacks.

Refer to your motherboard manual for the exact pin layout of these headers.

3. Arahan Operasi

Once all components are installed and connected, and the side panel is reattached, your system is ready for operation.

  1. Connect the power cord from the wall outlet to the power supply unit at the rear of the cabinet.
  2. Flip the power switch on the PSU to the 'ON' position (usually marked 'I').
  3. Press the power button on the front panel of the cabinet to start your computer. The blue LED stripe on the front panel will illuminate, and the power LED will indicate the system's status.
  4. To shut down the computer, use the operating system's shutdown procedure.
  5. In case of an unresponsive system, press and hold the power button for several seconds to force a shutdown, or press the reset button for a system restart.

The cabinet's grill design and pre-installed 120mm rear fan are designed to provide optimal airflow. Ensure that the side panel vents are not obstructed to maintain proper cooling performance.

4. Penyelenggaraan

Regular maintenance helps ensure the longevity and optimal performance of your computer system.

  • Pembersihan Habuk: Periodically clean dust from the exterior and interior of the cabinet. Use compressed air to clear dust from fan blades, heatsinks, and ventilation grilles. Ensure the system is powered off and unplugged before cleaning.
  • Pengudaraan: Ensure that the cabinet's ventilation openings, especially the front grill and side panel vents, are free from obstructions to allow for proper airflow.
  • Pengurusan Kabel: Periodically check internal cable routing to ensure it does not impede airflow or interfere with fan operation.

5. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

  • System does not power on:
    • Ensure the power cord is securely connected to both the wall outlet and the PSU.
    • Verify the PSU's main power switch is in the 'ON' position.
    • Periksa sama ada kabel suis kuasa panel hadapan disambungkan dengan betul ke pengepala papan induk.
    • Confirm the PSU is functioning by performing a paperclip test (refer to PSU manual for safety).
  • Tiada output paparan:
    • Ensure your monitor is connected to the correct video output port (graphics card or integrated graphics).
    • Verify that the graphics card is properly seated in its PCIe slot and any required power cables are connected.
    • Check RAM modules are correctly seated.
  • Excessive noise from fans:
    • Inspect fans (CPU, GPU, case fans) for dust buildup and clean them.
    • Ensure no cables are obstructing fan blades.
    • If a fan is consistently loud or making grinding noises, it may need replacement.
  • Overheating issues:
    • Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
    • Clean dust from all heatsinks and fans.
    • Verify thermal paste application on CPU cooler.
    • Ensure cabinet vents are not blocked.

6. Spesifikasi Teknikal

CiriSpesifikasi
JenamaGuru yang lebih sejuk
Nombor ModelRC-351-KKN2
Jenis KesMid Tower
warnaBlue (LED stripe) / Black (Chassis)
Bahan KepunganKaca Terbaja
Jenis Pemasangan Bekalan KuasaTop Mount (PSU included: 350W, 400W, or 500W)
Kaedah PenyejukanUdara
Fan Size (Pre-installed)120 Millimetres (Rear)
Number of Fans (Pre-installed)1
Total USB Ports (Front I/O)1 (USB 2.0)
Hard Disk Form Factor Support3.5 Inci
Berat Barang10.36 Paun (lebih kurang 4.7 kg)
Nombor Bahagian PengilangRC-351-KKN2

7. Waranti dan Sokongan

For warranty information and technical support regarding your Cooler Master CMP 351 Cabinet, please refer to the warranty card included with your product or visit the official Cooler Master webtapak.

You can also visit the Cooler Master Store for additional product information and support resources:

Kedai Cooler Master di Amazon

© 2023 Cooler Master. Semua hak terpelihara.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.