myTouchSmart 25055

myTouchSmart 25055 In-Wall Digital Countdown Timer Instruction Manual

Model: 25055

Brand: myTouchSmart

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your myTouchSmart 25055 In-Wall Digital Countdown Timer. This device is designed to automate indoor and outdoor lighting, fans, or other devices, offering convenience and energy savings. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Maklumat Keselamatan Penting

  • AMARAN: Risk of Electric Shock. Installation requires working with 120V AC wiring. Always turn off power at the circuit breaker or fuse box before installation.
  • Peranti ini bertujuan untuk kegunaan dalaman sahaja.
  • A neutral wire is DIPERLUKAN for proper installation and operation. If you are unsure, consult a qualified electrician.
  • Do not exceed the electrical ratings: 120VAC 60 Hz, 15A General/Resistive, 1200W Tungsten, 1200VA Ballast, ½ HP.
  • Pastikan semua sambungan wayar selamat dan terlindung dengan betul.
  • Baca semua arahan sepenuhnya sebelum memulakan pemasangan.

Kandungan Pakej

  • myTouchSmart 25055 In-Wall Digital Countdown Timer
  • Interchangeable White and Light Almond Switch Covers
  • Manual Pengguna (dokumen ini)

Note: A wall plate is not included and must be purchased separately.

Arahan Pemasangan

  1. Matikan Kuasa: Locate the circuit breaker or fuse that supplies power to the switch you are replacing. Turn it OFF. Verify power is off by attempting to turn on the light or device controlled by the switch.
  2. Keluarkan Suis Sedia Ada: Tanggalkan plat dinding dengan berhati-hati dan buka skru suis sedia ada dari kotak dinding. Putuskan wayar dari suis lama.
  3. Kenal pasti wayar: Identify the LINE (hot), LOAD, NEUTRAL, and GROUND wires. A neutral wire is DIPERLUKAN for this timer. If you do not have a neutral wire, consult a qualified electrician.
  4. Wire the Timer: Connect the wires to the myTouchSmart 25055 timer using the screw terminals as shown in the diagram below. Ensure all connections are tight and secure.
    • LINE Wire: Connect to the terminal labeled "Line".
    • LOAD Wire: Connect to the terminal labeled "Load".
    • NEUTRAL Wire: Connect to the terminal labeled "Neutral".
    • GROUND Wire: Connect to the terminal labeled "Ground".
    Wiring diagram for myTouchSmart 25055 In-Wall Digital Timer showing connections for Line, Load, Neutral, and Ground wires.

    Figure 1: Wiring Diagram. This image illustrates the correct connection points for the Line, Load, Neutral, and Ground wires on the back of the myTouchSmart 25055 timer module.

  5. Pasang Pemasa: Tolak pemasa berwayar ke dalam kotak dinding dengan lembut. Pasangkannya dengan skru yang disediakan.
  6. Pasang Plat Dinding: Attach your existing or a new wall plate (not included) over the timer.
  7. Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar atau kotak fius.

The timer includes interchangeable white and light almond switch covers to match your decor. To change the switch cover, carefully pry off the existing cover and snap on the desired color.

Operasi

Menetapkan Masa Semasa

  1. Tekan ke JAM butang untuk memasuki mod tetapan masa.
  2. Gunakan UP (▲) dan TURUN (▼) arrow buttons to adjust the hour and minute. The time will scroll.
  3. Tekan ke JAM butang sekali lagi untuk mengesahkan dan keluar dari mod tetapan masa.

Using Preset Programs

The myTouchSmart 25055 timer features three preset buttons for common scheduling needs:

  • EVENING (5pm-12am): Activates the connected device from 5:00 PM to 12:00 AM.
  • MORNING (5am-8am): Activates the connected device from 5:00 AM to 8:00 AM.
  • ALL NIGHT (6pm-6am): Activates the connected device from 6:00 PM to 6:00 AM.

To activate a preset program, simply press the corresponding button (e.g., PETANG, PAGI, ALL NIGHT). The blue LED indicator next to the button will illuminate to show it is active.

Custom Countdown Function

The COUNTDOWN button allows you to set a custom countdown timer for up to 24 hours.

  1. Tekan ke COUNTDOWN button. The display will show "00:00".
  2. Gunakan UP (▲) dan TURUN (▼) arrow buttons to set the desired countdown duration (up to 24 hours).
  3. Tekan ke COUNTDOWN button again to start the countdown. The connected device will turn ON for the set duration and then turn OFF.

Manual ON/OFF Override

You can manually turn the connected device ON or OFF at any time, overriding any active program.

  • Tekan ke ON button to manually turn the device ON.
  • Tekan ke DIMATIKAN button to manually turn the device OFF.
Depan view of myTouchSmart 25055 In-Wall Digital Timer with arrows pointing to the scroll buttons for setting time and the preset buttons for scheduling.

Figure 2: Simple Setup and Operation. This image highlights the scroll buttons for setting the current time and the preset buttons for activating schedules.

Ciri-ciri

  • Paparan Digital: Clear digital display for time and countdown settings.
  • Program Pratetap: Three convenient preset programs (Evening, Morning, All Night) and a Custom Countdown.
  • Pembatalan Manual: Dedicated ON/OFF buttons for instant manual control.
  • Penunjuk LED: Blue LED lights indicate active programs.
  • Keserasian Luas: Works with LED, CFL, Incandescent, and Halogen bulbs, including dimmable LED and CFL.
  • Bateri Sandaran: Maintains settings during power outages.
  • Pemasangan Mudah: Screw terminal installation for efficient wiring.
  • Pilihan Estetik: Includes interchangeable white and light almond switch covers.
Image showing a wall-mounted outdoor light fixture with icons for Lights, Fans, and Exhaust Fans, indicating the timer's versatility.

Figure 3: Product Applications. This image demonstrates that the timer can control various devices such as indoor/outdoor lights, ceiling fans, and exhaust fans.

Penyelenggaraan

  • Clean the timer's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
  • The internal backup battery is designed for long-term use and typically does not require replacement.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Pemasa tidak boleh dihidupkan.No power to the switch box; incorrect wiring; neutral wire not connected.Check circuit breaker. Verify wiring connections (Line, Load, Neutral, Ground). Ensure neutral wire is connected.
Connected device does not turn ON/OFF as scheduled.Incorrect current time setting; program not activated; device malfunction.Verify current time is set correctly. Ensure the desired program (Evening, Morning, All Night, Countdown) is active (blue LED). Test the connected device manually.
Paparan kosong atau berkelip.Low power; internal issue.Ensure stable power supply. If problem persists, turn off power at the breaker for 5 minutes, then restore. If still unresolved, contact customer support.
Butang tidak bertindak balas.Gangguan perisian sementara; kerosakan fizikal.Turn off power at the breaker for 5 minutes, then restore. If still unresponsive, contact customer support.

Spesifikasi

  • model: 25055
  • Penarafan Elektrik: 120VAC, 60 Hz
  • Muatan Maks: 15A General/Resistive, 1200W Tungsten, 1200VA Ballast, ½ HP
  • Dimensi Produk: 2"D x 4.5"W x 6"H
  • Timer Module Dimensions: Approximately 1.75" (4.45cm) width x 4.25" (10.8cm) height
  • Bahan: plastik
  • warna: White (with interchangeable Light Almond option)
  • Pensijilan: UL Tersenarai
  • Kawat Neutral: Diperlukan
  • Bateri Sandaran: NiMH (internal)
Image showing the dimensions of the myTouchSmart 25055 In-Wall Digital Timer module, indicating a width of 1.75 inches (4.45 cm) and a height of 4.25 inches (10.8 cm).

Figure 4: Timer Module Dimensions. This image provides the physical measurements of the timer module for installation reference.

Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk kepada pihak berkuasa rasmi pengeluar webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda untuk tuntutan waranti.