Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) Instruction Manual

pengenalan

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.

Kandungan Pakej:

• Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
• Kit Perkakasan Pemasangan (pelbagai skru, sauh, pencuci)
• High Speed HDMI Cable (1080p 1.4v)
• 6-inch Tri-axis Spirit Level
• Manual Arahan

Rajah 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.

Maklumat Keselamatan Penting

WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
• Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/brick.
• Do not exceed the maximum load capacity of 36.2kg (80lbs).
• Produk ini direka untuk kegunaan dalaman sahaja.
• Ensure all screws are securely tightened, but do not overtighten.
• Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
• Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, berunding dengan profesional yang berkelayakan.

Spesifikasi

Rajah 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).

Persediaan dan Pemasangan

1. Senarai Semak Prapemasangan

• Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
• Jenis Dinding: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
• Alat yang Diperlukan: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
• Weight Check: Ensure your TV's weight does not exceed 36.2kg (80lbs).

Rajah 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.

2. Attaching the TV Brackets to Your Television

1. Letakkan TV anda dengan berhati-hati menghadap ke bawah di atas permukaan yang lembut dan bersih untuk mengelakkan kerosakan skrin.
2. Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
3. Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.

3. Mounting the Wall Plate to the Wall

1. Tentukan Ketinggian Pemasangan: Decide on the desired height for the top of your TV. Mark this on the wall.
2. Cari Stud (untuk dinding stud kayu): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
3. Kedudukan Plat Dinding: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
4. Gerudi Lubang Juruterbang:
   • For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
   • For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
5. Plat Dinding Selamat: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.

4. Hanging the Television

1. Dengan bantuan, angkat televisyen dengan berhati-hati dengan kurungan yang dipasang.
2. Cangkukkan kurungan TV pada plat dinding. Pastikan TV diletakkan dengan selamat pada plat dinding.
3. Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.

Arahan Operasi

The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

Rajah 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewing angles from various positions in a room.

Adjusting Swivel

Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.

Melaraskan Kecondongan

To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.

Pengurusan Kabel

The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

Rajah 5: Terperinci view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.

Penyelenggaraan

• Pemeriksaan Berkala: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
• Pembersihan: Bersihkan pelekap dengan kain lembut dan kering. Elakkan pembersih atau pelarut yang kasar yang boleh merosakkan kemasan.
• Pelinciran: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
• Had Berat: Never exceed the maximum weight capacity of 36.2kg (80lbs).

Menyelesaikan masalah

Maklumat Waranti

The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a Waranti Produk 25 Tahun. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For warranty claims or further details, please contact Invision customer support.

Sokongan Pelanggan

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.

Pengeluar: Invision Technology (UK) Ltd

Nombor Pengenalan Perdagangan Global (GTIN): 05060264551392

Please refer to the product packaging or the official Invision webtapak untuk maklumat hubungan terkini.

Rajah 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.