1. Maklumat Keselamatan Penting
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.
- Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC).
- Rujuk juruelektrik bertauliah jika anda tidak pasti tentang prosedur pendawaian.
- This fixture is designed for outdoor, wet location use. Ensure all connections are properly sealed to prevent water intrusion.
- Jangan cuba mengubah suai sumber cahaya LED bersepadu. Ia tidak boleh diganti.
2. Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- 1 x VAXCEL Melbourne Post Light Fixture (with integrated LED)
- 1 x Clear Crackle Glass Shade
- Perkakasan Pemasangan (skru, nat dawai)
3. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | T0165 |
| Dimensi (L x W x H) | 8" x 8" x 16" |
| Berat badan | 3.97 paun |
| bahan | Keluli Aloi, Kaca |
| Sumber Cahaya | Integrated LED (6 Watts) |
| Kecerahan | 300 Lumen |
| Suhu Warna | 3000 Kelvin (Putih Hangat) |
| Indeks Paparan Warna (CRI) | 82 |
| Voltage | 120 Volt |
| Ciri Khas | Dusk to Dawn Sensor, Exterior Wet Rated |
| Jenis Pemasangan | Post Mounted (fits standard 3-inch diameter post, not included) |
4. Arahan Pemasangan (Persediaan)
Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed to be mounted on a standard 3-inch diameter post (post not included).
- Prepare the Post: Ensure your existing 3-inch diameter post is securely installed and has electrical wiring extending from its top.
- Sambungan Pendawaian: Carefully connect the fixture's wires to your household electrical wires. Use the provided wire nuts to secure connections:
- Connect the black wire from the fixture to the black (hot) wire from the post.
- Connect the white wire from the fixture to the white (neutral) wire from the post.
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the post.
- Pasang Lekapan: Carefully place the fixture onto the top of the 3-inch post, aligning any pre-drilled holes if applicable. Secure the fixture to the post using the provided mounting screws. Do not overtighten.
- Pasang Teduhan Kaca: Gently place the clear crackle glass shade into the fixture, ensuring it is seated properly and securely.
- Pulihkan Kuasa: Setelah lekapan dipasang dengan selamat dan semua sambungan dibuat, kembalikan kuasa pada pemutus litar.
5. Arahan Operasi
The VAXCEL Melbourne Post Light features an integrated dusk-to-dawn photocell sensor for automatic operation. There are no manual controls for this light fixture.
- Hidup/Mati Automatik: The photocell sensor (refer to Figure 3) detects ambient light levels. The fixture will automatically turn on when it gets dark and turn off when it detects sufficient daylight.
- Operasi Awal: Upon initial power-up, the light may take a few minutes to calibrate or may turn on briefly before turning off if it is daytime. This is normal operation.
6. Penyelenggaraan
Regular maintenance will help preserve the appearance and functionality of your VAXCEL Melbourne Post Light.
- Pembersihan: Untuk membersihkan lekapan, pastikan kuasa dimatikan. Lap dengan kain lembutamp kain. Jangan gunakan pembersih atau pelarut yang melelas, kerana ia boleh merosakkan kemasan atau kaca.
- Sumber Lampu LED: The LED light source is integrated and designed for long-lasting performance. It is not user-replaceable.
- Photocell: Keep the photocell sensor (Figure 3) free from dirt, debris, or obstructions (e.g., leaves, snow) to ensure proper dusk-to-dawn operation.
7. Penyelesaian masalah
If your VAXCEL Melbourne Post Light is not functioning as expected, refer to the following common issues and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala pada waktu malam. | Tidak ada kekuatan untuk perlawanan. Photocell is obstructed or faulty. Isu pendawaian. | Check circuit breaker and wall switch (if applicable). Ensure photocell is clean and not blocked by objects. Verify wiring connections are secure (with power off). |
| Cahaya kekal menyala pada siang hari. | Photocell is obstructed or faulty. Insufficient ambient light reaching the sensor. | Ensure photocell is clean and not blocked. Relocate the fixture if it's in a shaded area during the day. |
| Cahaya berkelip atau malap. | Sambungan pendawaian longgar. Turun naik kuasa. | Check all wiring connections (with power off). Consult an electrician if power fluctuations are suspected. |
If these steps do not resolve the issue, please contact VAXCEL customer support.
8. Maklumat Waranti
The VAXCEL Melbourne 1L LED Dusk to Dawn Outdoor Post Light (Model T0165) is covered by a Waranti terhad 5 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the VAXCEL official webtapak atau hubungi sokongan pelanggan.
9. Maklumat Hubungan
For further assistance, technical support, or warranty claims, please contact VAXCEL customer service:
- Webtapak: Visit the VAXCEL Store on Amazon
- Please have your model number (T0165) and proof of purchase ready when contacting support.
