Lavor Vertigo 28 Plus Pressure Washer User Manual

pengenalan

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Lavor Vertigo 28 Plus pressure washer. Please read this manual thoroughly before using the appliance to ensure proper handling and to prevent injury or damage.

Arahan Keselamatan Penting

Sentiasa patuhi langkah berjaga-jaga keselamatan asas apabila menggunakan peralatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.

• Pastikan bekalan kuasa voltage matches the specifications on the product label.
• Always use a grounded electrical outlet and avoid using extension cords unless absolutely necessary and rated for outdoor use.
• Pakai peralatan pelindung diri yang sesuai, termasuk pelindung mata, semasa operasi.
• Jangan sekali-kali halakan pancutan air kepada orang, haiwan, peralatan elektrik atau perkakas itu sendiri.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan operasi.
• Do not operate the pressure washer if the power cord or other critical parts are damaged.
• Disconnect the power plug from the outlet before performing any cleaning or maintenance.

Komponen Produk

The Lavor Vertigo 28 Plus pressure washer features an axial pump with a durable brass head and three high-resistance steel pistons. It includes an integrated by-pass valve and an automatic stop system for efficient operation. The unit is designed with an ergonomic handle and an accessory compartment for convenience.

Komponen utama termasuk:

• High-pressure pump unit
• Pemegang ergonomik
• Kekili hos
• Spray gun with quick-fix attachment
• Multi-nozzle lance with 4 nozzles
• Turbo head
• Integrated detergent tank

An image of the Lavor Vertigo 28 Plus pressure washer, showing its main body, handle, hose reel, and attached spray gun.

Panduan Persediaan

1. Membongkar

Carefully remove all components from the packaging. Verify that all listed parts are present and undamaged. Retain packaging for future storage or transport.

2. Perhimpunan

1. Attach the ergonomic handle to the main unit, ensuring it clicks securely into place.
2. Assemble the hose reel onto the designated mounting points. Connect the high-pressure hose from the unit to the hose reel, then connect the other end of the high-pressure hose to the spray gun.
3. Attach the desired lance (multi-nozzle or turbo head) to the spray gun using the quick-fix attachment.

3. Sambungan Air

1. Connect a standard garden hose to the water inlet on the pressure washer. Ensure the connection is tight to prevent leaks.
2. Turn on the water supply fully. The water supply must be clean and free of debris to prevent damage to the pump.

4. Sambungan elektrik

1. Plug the power cord into a suitable grounded electrical outlet. Confirm that the electrical supply (230V - 50Hz) matches the unit's requirements.

Operating Your Pressure Washer

1. Memulakan Unit

1. Before turning on the power, squeeze the trigger on the spray gun to release any trapped air from the system. Allow water to flow through until a steady stream emerges, indicating the pump is primed.
2. Turn the pressure washer ON using the main power switch. The motor will activate when the spray gun trigger is squeezed and automatically stop when released (Auto Stop System).

2. Using Nozzles and Lances

• Multi-Nozzle Lance: This lance offers four different spray patterns. Rotate the nozzle head to select the desired pattern (e.g., pencil jet, fan spray).
• Turbo Head: For stubborn dirt and grime, attach the turbo head. It provides a concentrated, rotating spray for maximum cleaning power.
• Always test the chosen spray pattern on an inconspicuous area first to avoid damaging the surface.

3. Aplikasi Detergen

1. Fill the integrated detergent tank with a pressure washer-specific detergent. Do not use corrosive or abrasive cleaning agents.
2. Attach the detergent application nozzle (if separate) or adjust the multi-nozzle lance to the detergent setting.
3. Apply detergent to the surface, working from bottom to top. Allow the detergent to soak for a few minutes (refer to detergent instructions) before rinsing with high-pressure water.

4. Stopping the Unit

1. Turn the pressure washer OFF using the main power switch.
2. Matikan bekalan air di paip.
3. Tekan picu pada pistol semburan untuk melepaskan sebarang tekanan yang tinggal dalam sistem.
4. Disconnect the water hose and then the power cord.

Penyelenggaraan dan Penjagaan

1. Pembersihan muncung

Regularly inspect and clean the nozzles to prevent blockages, which can lead to reduced pressure or inconsistent spray patterns. Use the provided nozzle cleaning tool to clear any debris.

2. Penapis Masuk Air

Periodically check and clean the water inlet filter. A clogged filter can restrict water flow to the pump, causing performance issues. Remove the filter, rinse it under running water, and reinsert it.

3. Storage and Winterization

Before storing the unit, especially in areas where temperatures may drop below freezing, it is crucial to drain all water from the pump, hose, and spray gun. This prevents damage from freezing water. Store the pressure washer in a dry, protected area.

Panduan Penyelesaian Masalah

Spesifikasi Teknikal

• model: 8.047.0016
• Tekanan Maksimum: 160 Bar
• Kadar Aliran Maksimum: 510 Liter sejam
• Penggunaan Kuasa: 2800 W maks
• Voltage: 230 V - 50 Hz
• Berat: 23.5 kg
• Jenis Pam: Axial pump with brass head
• Auto Stop System: ya
• Detergent System: Direct suction with integrated tank
• Pematuhan: CE, EMC

Waranti dan Sokongan Pelanggan

For detailed warranty information, terms, and conditions, please refer to the warranty card or documentation included with your purchase. For technical assistance, spare parts, or customer support, please contact Lavor customer service through their official channels.