Manual Arahan Loket Besar ET2 Hilite (Model E21169-01BZ)

1. Maklumat Keselamatan Penting

Please read and understand all instructions before attempting to assemble, install, or operate this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.

• AMARAN: Risk of electric shock. Disconnect power at the main circuit breaker or fuse box before installation or any maintenance.
• Rujuk juruelektrik bertauliah jika anda tidak pasti tentang proses pemasangan.
• Pastikan semua sambungan elektrik dibuat mengikut kod tempatan, ordinan dan Kod Elektrik Kebangsaan (NEC).
• Jangan cuba mengubah suai lekapan atau komponennya.
• Handle the fixture with care to avoid damage to the LED components or glass shades.

2. Kandungan Pakej

Sahkan bahawa semua komponen ada dan tidak rosak sebelum memulakan pemasangan. Jika mana-mana bahagian hilang atau rosak, jangan teruskan pemasangan dan hubungi khidmat pelanggan.

• Pendant Fixture Assembly (9-light LED pendant)
• Mounting Hardware Kit (crossbar, mounting screws, wire nuts)
• Manual Arahan (dokumen ini)

3. Persediaan dan Pemasangan

3.1 Alat Diperlukan (Tidak Termasuk)

• Pemutar Skru Kepala Phillips
• Pemutar Skru Flathead
• Pelucut Kawat
• Pita Elektrik
• Tangga
• Cermin Mata Keselamatan

3.2 Langkah Pemasangan

1. Matikan Kuasa: Before starting, ensure the power to the junction box is turned off at the circuit breaker.
2. Sediakan Pemasangan: Attach the mounting crossbar to the junction box using the provided screws. Ensure it is securely fastened.
3. Laraskan Ketinggian Loket: The individual pendants can be adjusted to your desired hanging height. Carefully feed the suspension wires through the canopy until the desired length is achieved for each light. Secure the wires according to the specific mechanism on the fixture.
4. Sambungan Pendawaian: Connect the fixture's wires to the corresponding wires from the junction box. Use the provided wire nuts.
   • Sambungkan wayar hitam dari lekapan ke wayar hitam (panas) dari kotak simpang.
   • Sambungkan wayar putih dari lekapan ke wayar putih (neutral) dari kotak simpang.
   • Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box (or to the mounting crossbar if no ground wire is present).
   Ensure all connections are tight and secure. Wrap wire nuts with electrical tape for added security.
5. Kanopi Gunung: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting crossbar and secure it with the canopy screws.
6. Pulihkan Kuasa: Setelah lekapan dipasang dengan selamat, pulihkan kuasa pada pemutus litar.

Image 3.2.1: Fully assembled ET2 Hilite Large Pendant (Model E21169-01BZ) showing the overall design and multiple lights.

Image 3.2.2: Dimensional drawing of the ET2 Hilite Large Pendant, indicating overall height and width for installation planning.

4. Arahan Operasi

The ET2 Hilite Large Pendant is designed for simple operation via a standard wall switch.

• Menghidupkan/Mematikan: Use the wall switch connected to the fixture's circuit to turn the pendant lights on or off.
• Teknologi LED: This fixture utilizes integrated LED technology for energy efficiency and long lifespan. No traditional bulbs need to be replaced.
• Kawalan Apl: While the fixture itself does not have integrated app control, it is compatible with most standard smart home lighting systems and dimmer switches that support LED fixtures. Consult your smart home system's instructions for integration.

5. Penyelenggaraan

Proper care and maintenance will ensure the longevity and appearance of your pendant light.

• Pembersihan: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
• Tiada Bahagian Boleh Diservis Pengguna: The LED components are integrated and not designed for user replacement. Do not attempt to disassemble the LED modules.
• Pemeriksaan: Periksa secara berkala semua sambungan dan perkakasan pelekap untuk kesesakan.

6. Penyelesaian masalah

Jika anda mengalami masalah dengan lampu loket anda, rujuk langkah penyelesaian masalah biasa berikut:

• Lampu Tidak Dihidupkan:
  • Check that the power is on at the circuit breaker.
  • Pastikan suis dinding berada dalam kedudukan 'HIDUP'.
  • Verify that all wiring connections are secure (ensure power is off before checking).
• Lights Flicker:
  • Ensure all wiring connections are secure. Loose connections can cause flickering.
  • If using a dimmer switch, ensure it is compatible with LED lighting. Incompatible dimmers can cause flickering or damage to the LEDs.
• Output Cahaya Malap:
  • If using a dimmer, ensure it is set to the maximum brightness.
  • Verify the fixture is receiving the correct voltage (120V).

If these steps do not resolve the issue, contact a qualified electrician or ET2 customer support.

7. Spesifikasi

8. Waranti dan Sokongan

8.1 Maklumat Waranti

This ET2 Hilite Large Pendant (Model E21169-01BZ) is covered by a Waranti pengilang selama 1 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

8.2 Sokongan Pelanggan

For technical assistance, warranty claims, or to report missing/damaged parts, please contact ET2 customer support. Refer to the original packaging or the ET2 official webtapak untuk maklumat hubungan semasa.