BLACK+DECKER GPC1820LN 18V 2.0Ah Cordless High Branch Pole Chainsaw Instruction Manual

1. Pengenalan

Thank you for choosing the BLACK+DECKER GPC1820LN 18V 2.0Ah Cordless High Branch Pole Chainsaw. This tool is designed for safely and efficiently pruning high branches without the need for a ladder. Its lightweight and cordless design offers convenience and maneuverability for various gardening tasks. Please read this manual thoroughly before operating the tool to ensure safe and effective use.

Image: The BLACK+DECKER GPC1820LN 18V 2.0Ah Cordless High Branch Pole Chainsaw.

2. Arahan Keselamatan

Sentiasa mengutamakan keselamatan semasa mengendalikan alatan kuasa. Kegagalan mematuhi arahan ini boleh mengakibatkan kecederaan serius atau kerosakan harta benda.

• Peralatan Pelindung Diri: Always wear safety glasses, gloves, and sturdy footwear. A hard hat is recommended for overhead work.
• Kawasan Kerja: Ensure the work area is clear of bystanders, children, and pets. Maintain a safe distance from power lines and other obstacles.
• Kestabilan: Always maintain a firm footing and balance. Do not overreach.
• Pemeriksaan Alat: Before each use, inspect the tool for any damage, loose parts, or worn components. Ensure the chain is properly tensioned and lubricated.
• Keselamatan Bateri: Use only BLACK+DECKER 18V lithium-ion batteries and chargers. Do not expose batteries to water or extreme temperatures.
• Teknik Memotong: Be aware of falling branches. Plan your cuts to avoid kickback. Do not cut branches thicker than the maximum recommended capacity.
• Storan: Store the tool in a dry, secure place out of reach of children. Remove the battery when not in use.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• BLACK+DECKER GPC1820LN Pole Chainsaw Unit
• Tiang Sambungan
• 18V 2.0Ah Lithium-ion Battery (x1)
• Pengecas Rapid
• Beg Simpanan
• Cermin Mata Keselamatan
• Wrench Hex

Image: Components of the BLACK+DECKER GPC1820LN Pole Chainsaw, including the main unit and extension pole.

4. Persediaan

4.1. Mengecas Bateri

1. Sambungkan pengecas pantas ke soket kuasa yang sesuai.
2. Insert the 18V lithium-ion battery into the charger.
3. Allow the battery to charge for approximately 60 minutes until the indicator light shows a full charge.
4. Keluarkan bateri daripada pengecas setelah dicas sepenuhnya.

4.2. Assembling the Pole Chainsaw

1. Ensure the battery is removed from the tool before assembly.
2. Attach the chainsaw head unit to the main pole. Ensure it clicks securely into place.
3. If extended reach is required, attach the extension pole between the chainsaw head unit and the main pole. Ensure all connections are firm and secure.
4. Using the hex wrench, adjust the chain tension. The chain should be snug but still able to be pulled freely around the bar by hand.
5. Fill the oil reservoir with appropriate chain lubricant (not included). Regularly check the oil level during operation.

Image: The BLACK+DECKER GPC1820LN Pole Chainsaw fully assembled with the extension pole.

5. Arahan Operasi

5.1. Pemeriksaan Pra Operasi

• Ensure all safety instructions have been reviewed.
• Confirm the battery is fully charged and securely inserted.
• Periksa ketegangan rantai dan pelinciran.
• Periksa kawasan kerja untuk bahaya.

5.2. Bermula dan Berhenti

• To start: Press the safety lock-off button and then squeeze the trigger switch.
• Untuk berhenti: Lepaskan suis pencetus.

5.3. Teknik Memotong

When cutting high branches, position yourself safely away from the falling path of the branch. Use the pole to reach the desired branch. Make a small undercut first on the underside of the branch to prevent splintering, then make the main cut from the top. Avoid cutting branches thicker than 170mm in diameter.

Image: A person operating the pole chainsaw to prune a high tree branch, demonstrating safe reach.

Image: An operator using the pole chainsaw, with an arrow illustrating the upward reach and cutting action on a high branch.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan hayat alat anda.

• Mengasah/Penggantian Rantai: A sharp chain is essential for efficient cutting. Sharpen the chain regularly or replace it when dull or damaged. Refer to the chain type 90SG-34 (A6158) for replacement.
• Penyelenggaraan Bar: Clean the guide bar groove and oil holes. Flip the bar periodically to ensure even wear.
• Pembersihan: After each use, clean the tool body, chain, and bar. Remove any sawdust or debris.
• Penjagaan Bateri: Simpan bateri di tempat yang sejuk dan kering. Jangan simpan bateri yang telah dinyahcas sepenuhnya untuk tempoh yang lama.
• Storan: Store the pole chainsaw in its storage bag in a dry, secure location. Remove the battery before storing.

Imej: Dari dekat view of the chainsaw head, highlighting the chain and guide bar for maintenance reference.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

Tempoh Waranti: This BLACK+DECKER product is covered by a warranty for 1 year from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical assistance, spare parts, or warranty service, please contact BLACK+DECKER customer support. Refer to the official BLACK+DECKER website or your local dealer for contact information specific to your region.

Sumber Dalam Talian: For additional information, product registration, and FAQs, visit the official BLACK+DECKER webtapak: www.blackanddecker.com