Peco TA168-100 Non-Programmable Fan Coil Thermostat User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the Peco TA168-100 Non-Programmable Fan Coil Thermostat. This device is designed for controlling fan coil units in various HVAC systems, including electric, gas, and PTAC systems. It supports multi-speed fan switching and offers auto-heat-cool-off functionality with 2/4 pipe configuration capabilities.

Sila baca manual ini dengan teliti sebelum pemasangan dan pengendalian untuk memastikan fungsi dan keselamatan yang betul.

2. Maklumat Keselamatan

AMARAN: This product operates on line voltage. Installation and servicing should only be performed by a qualified electrician or HVAC technician. Disconnect power at the main service panel before installing or servicing this thermostat to prevent electrical shock or equipment damage.

• Pastikan semua pendawaian mematuhi kod dan ordinan elektrik tempatan.
• Do not install in locations exposed to direct sunlight, drafts, or extreme temperatures.
• Peranti ini bertujuan untuk kegunaan dalaman sahaja.

3. Ciri-ciri Utama

• Operasi tidak boleh diprogramkan untuk kawalan suhu yang mudah.
• Compatible with electric, gas, and PTAC systems.
• Multi-speed fan switching (Off-Hi-Med-Low).
• Operating modes: Auto-Heat-Cool-Off.
• Supports 2-pipe and 4-pipe fan coil configurations.
• Automatic Summer/Winter changeover capability.
• Digital display with backlight.
• Local or remote sensing options.

4. Persediaan dan Pemasangan

4.1 Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• Peco TA168-100 Thermostat Unit
• Skru Pemasangan
• Panduan Pemasangan (manual ini)

4.2 Lokasi Pemasangan

Select a central location on an interior wall, approximately 5 feet (1.5 meters) above the floor. Avoid areas with:

• Cahaya matahari langsung
• Drafts from windows or doors
• Heat sources (e.g., lamps, appliances)
• Paip atau saluran tersembunyi

4.3 Arahan Pendawaian

PENTING: Disconnect power to the HVAC system at the circuit breaker before proceeding with wiring.

1. Carefully remove the front cover of the thermostat to expose the wiring terminals.
2. Sambungkan talian voltage wires from your HVAC system to the appropriate terminals on the thermostat. Refer to the wiring diagram provided with your specific fan coil unit for correct connections.
3. Pastikan semua sambungan selamat dan terlindung.
4. If using remote sensing, connect the remote sensor wires to the designated terminals.
5. Mount the thermostat base to the wall using the provided screws.
6. Reattach the front cover of the thermostat.

Rajah 1: Depan view of the Peco TA168-100 Non-Programmable Fan Coil Thermostat. The image shows the digital display indicating "68.4 HEAT", up/down arrow buttons, a 'MODE' button, and a fan speed slider switch labeled 'OFF HI MED LO FAN' at the bottom. The Peco logo is visible on the lower left.

5. Arahan Operasi

5.1 Kawalan Ke Atasview

• Paparan Digital: Shows current temperature and operating mode.
• Anak panah atas/bawah: Adjust the desired setpoint temperature.
• Butang MOD: Cycles through operating modes (Auto, Heat, Cool, Off).
• Fan Speed Slider: Selects fan operation (Off, Hi, Med, Low).

5.2 Menetapkan Suhu

Gunakan Up or Bawah arrow buttons to increase or decrease the desired temperature setpoint. The display will show the new setpoint briefly before returning to the current room temperature.

5.3 Memilih Mod Pengendalian

Tekan ke MODE butang untuk melihat mod pengendalian yang tersedia:

• MATI: Mematikan sistem pemanasan dan penyejukan.
• HABA: Mengaktifkan sistem pemanasan apabila suhu bilik jatuh di bawah takat set.
• KEREN: Mengaktifkan sistem penyejukan apabila suhu bilik meningkat melebihi takat set.
• AUTO: Automatically switches between heating and cooling to maintain the setpoint.

5.4 Melaraskan Kelajuan Kipas

Use the fan speed slider switch located at the bottom of the thermostat to select the desired fan operation:

• MATI: Fan is off.
• LO: Kelajuan kipas rendah.
• MED: Medium fan speed.
• HI: Kelajuan kipas tinggi.

6. Penyelenggaraan

The Peco TA168-100 thermostat requires minimal maintenance. Follow these guidelines to ensure optimal performance:

• Pembersihan: Lap bahagian luar termostat dengan kain lembutamp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Aliran udara: Pastikan lubang udara pada termostatasing tidak terhalang, kerana ini boleh menjejaskan ketepatan pengesanan suhu.
• Semakan Tahunan: It is recommended to have your HVAC system, including the thermostat, inspected annually by a qualified technician.

7. Penyelesaian masalah

If you experience issues with your thermostat, refer to the following table:

Jika masalah berterusan selepas mencuba penyelesaian ini, hubungi juruteknik HVAC bertauliah untuk mendapatkan bantuan.

8. Spesifikasi

9. Maklumat Waranti

For specific warranty details regarding your Peco TA168-100 thermostat, please refer to the warranty card included with your product or visit the official Peco webtapak. Terma jaminan biasanya meliputi kecacatan bahan dan mutu kerja untuk tempoh tertentu dari tarikh pembelian.

Simpan bukti pembelian anda untuk tuntutan waranti.

10. Sokongan Pelanggan

If you require further assistance or have questions not covered in this manual, please contact Peco customer support. Contact information can typically be found on the product packaging or the official Peco webtapak.

Sumber Dalam Talian: www.peco.com