Manual Pengguna Penguji TDS Julat Rendah Hach 9531200 Pocket Pro

pengenalan

The Hach Pocket Pro Low Range TDS Tester is designed to provide accurate and reliable measurements of Total Dissolved Solids (TDS) in various water samples. This compact and easy-to-use device features built-in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen, making it ideal for field and laboratory use. This manual provides essential information for the proper setup, operation, and maintenance of your TDS tester.

Apa yang ada dalam Kotak

• Hach Pocket Pro Low Range TDS Tester
• 4 bateri AAA
• Lanyard
• Penyelesaian penentukuran
• Panduan permulaan cepat

Ciri-ciri Utama

• Confidence in results
• Jimat masa dan wang
• Kemudahan penggunaan

Persediaan

Pemasangan Bateri

1. Cari penutup petak bateri di bahagian belakang penguji.
2. Tanggalkan penutup.
3. Insert 4 AAA batteries, ensuring correct polarity as indicated inside the compartment.
4. Gantikan penutup petak bateri dengan selamat.

Penentukuran Awal

For optimal accuracy, it is recommended to perform an initial calibration upon first use or after prolonged storage. Use the provided calibration solution for this process. Refer to the quick start guide for detailed calibration steps specific to your model.

Arahan Operasi

Menghidupkan/Mematikan

Press the power button (circular arrow icon) to turn the tester on. Press and hold the power button for a few seconds to turn it off.

Mengambil Pengukuran

1. Ensure the tester is clean and dry before use.
2. Immerse the probe end of the tester into the sample solution, ensuring the sensor is fully submerged.
3. Allow a few moments for the reading to stabilize on the large LCD screen. The display will show the TDS value and temperature.
4. Record the measurement as needed.
5. Rinse the probe with distilled water after each measurement to prevent cross-contamination.

Memahami Paparan

The LCD screen displays the primary measurement (TDS) and the temperature. The device includes built-in diagnostics to assist with troubleshooting and ensure reliable readings.

Penyelenggaraan

Membersihkan Probe

Regular cleaning of the probe is crucial for accurate readings. Rinse the probe thoroughly with distilled or deionized water after each use. For stubborn residues, gently wipe the probe with a soft cloth or cotton swab. Avoid abrasive materials that could damage the sensor.

Penggantian Bateri

When the battery indicator appears on the display, replace the 4 AAA batteries as described in the Setup section. Always use fresh batteries for optimal performance.

Penyimpanan

Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the probe is clean and dry before storage. If storing for extended periods, remove the batteries to prevent leakage.

Menyelesaikan masalah

Bacaan Tidak Tepat

• Ensure the probe is clean and free of debris.
• Perform a calibration using fresh calibration solution.
• Check for air bubbles around the probe during measurement.
• Sahkan sample temperature is within the operating range.

Tiada Isu Paparan/Kuasa

• Periksa sama ada bateri dipasang dengan betul dan mempunyai cas yang mencukupi. Gantikan jika perlu.
• Pastikan penutup petak bateri ditutup dengan selamat.

Masa Respons Lambat

• Clean the probe thoroughly.
• Allow sufficient time for the reading to stabilize, especially in samples with varying temperatures.

Spesifikasi

Waranti dan Sokongan

Hach products are manufactured to high standards of quality and reliability. For specific warranty information pertaining to your Hach 9531200 Pocket Pro Low Range TDS Tester, please refer to the documentation included with your purchase or visit the official Hach webtapak.

For further assistance, technical support, or to explore other Hach products, please visit the HACH Store on Amazon.