JBM 51838 Industrial Wet and Dry Vacuum Cleaner User Manual

pengenalan

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your JBM 51838 Industrial Wet and Dry Vacuum Cleaner. Please read this manual thoroughly before using the appliance to ensure proper function and to prevent injury or damage.

The JBM 51838 is designed for both wet and dry vacuuming tasks in industrial and commercial environments. Its robust construction and 80-liter capacity make it suitable for demanding cleaning applications.

Arahan Keselamatan

Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan peralatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.

• Baca semua arahan sebelum digunakan.
• Jangan biarkan perkakas tanpa pengawasan apabila dipasang. Cabut plag dari saluran keluar apabila tidak digunakan dan sebelum diservis.
• Jangan gunakan di luar atau di permukaan basah.
• Jangan biarkan digunakan sebagai mainan. Perhatian yang rapi diperlukan apabila digunakan oleh atau berhampiran kanak-kanak.
• Gunakan hanya seperti yang diterangkan dalam manual ini. Gunakan hanya lampiran yang disyorkan pengilang.
• Jangan gunakan dengan kord atau palam yang rosak. Jika perkakas tidak berfungsi sebagaimana mestinya, telah terjatuh, rosak, ditinggalkan di luar rumah, atau terjatuh ke dalam air, kembalikannya ke pusat servis.
• Jangan tarik atau bawa dengan kord, gunakan kord sebagai pemegang, tutup pintu pada kord, atau tarik kord di sekeliling tepi atau sudut yang tajam. Jangan jalankan perkakas di atas kord. Jauhkan kord dari permukaan yang dipanaskan.
• Jangan cabut plag dengan menarik kord. Untuk mencabut palam, pegang palam, bukan kordnya.
• Jangan pegang palam atau perkakas dengan tangan yang basah.
• Jangan letakkan sebarang objek ke dalam bukaan. Jangan gunakan dengan mana-mana bukaan yang disekat; jauhkan daripada habuk, serabut, rambut dan apa sahaja yang boleh mengurangkan aliran udara.
• Jauhkan rambut, pakaian longgar, jari dan semua bahagian badan daripada bukaan dan bahagian yang bergerak.
• Jangan ambil apa-apa yang terbakar atau berasap, seperti rokok, mancis, atau abu panas.
• Jangan gunakan untuk mengambil cecair mudah terbakar atau mudah terbakar, seperti petrol, atau gunakan di kawasan yang mungkin terdapat.
• Jangan gunakan tanpa beg habuk dan/atau penapis di tempatnya.
• Matikan semua kawalan sebelum mencabut plag.
• Gunakan lebih berhati-hati semasa membersihkan di tangga.
• Simpan perkakas anda di dalam rumah di tempat yang sejuk dan kering.

Komponen Produk

The JBM 51838 Industrial Wet and Dry Vacuum Cleaner includes the following main components:

• Motor head assembly
• Stainless steel tank (80 L capacity)
• hos
• Extension wands (chrome-plated)
• muncung lantai
• Cartridge filter (for dry use)
• Foam filter (for wet use)
• Wheeled base with handle

Rajah 1: JBM 51838 Industrial Wet and Dry Vacuum Cleaner. This image shows the complete vacuum cleaner assembly, including the stainless steel tank, motor head (yellow and black), flexible hose, chrome extension wand, and floor nozzle, all mounted on a wheeled base with a handle.

Persediaan dan Perhimpunan

Follow these steps to assemble your JBM 51838 vacuum cleaner:

1. Buka Pembungkusan Komponen: Carefully remove all components from the packaging. Verify that all parts listed in the "Product Components" section are present.
2. Pasang Roda: Secure the wheels to the wheeled base if they are not pre-assembled. Ensure they are firmly attached for stability.
3. Mount Tank to Base: Place the stainless steel tank onto the wheeled base.
4. Pasang Penapis:
   • Untuk Vacuuming Kering: Install the cartridge filter onto the motor head's filter cage. Ensure it is securely seated.
   • Untuk Vacuuming Basah: Remove the cartridge filter and install the foam filter over the filter cage.
5. Attach Motor Head: Place the motor head assembly onto the tank. Secure it with the locking clips on either side of the tank.
6. Sambungkan Hos: Insert the flexible hose into the suction inlet on the tank. Ensure a tight connection.
7. Lampirkan Aksesori: Connect the extension wands to the hose, and then attach the desired floor nozzle or other accessory to the end of the wands.
8. Sambungan Kuasa: Ensure the vacuum cleaner is switched off before plugging the power cord into a suitable 220V electrical outlet.

Arahan Operasi

Vacuuming Kering

1. Pastikan penapis kartrij dipasang dengan betul.
2. Connect the hose and desired dry vacuuming accessory.
3. Palamkan kord kuasa ke alur keluar 220V.
4. Putar suis kuasa ke kedudukan "HIDUP".
5. Begin vacuuming the desired surface.
6. When finished, turn the power switch to "OFF" and unplug the appliance.
7. Empty the tank and clean the filter as described in the Maintenance section.

Vacuuming Basah

Penting: Before wet vacuuming, ensure the cartridge filter is removed and the foam filter is installed. Failure to do so will damage the cartridge filter and potentially the motor.

1. Keluarkan penapis kartrij dan pasangkan penapis buih.
2. Connect the hose and a suitable wet vacuuming accessory (e.g., squeegee nozzle).
3. Palamkan kord kuasa ke alur keluar 220V.
4. Putar suis kuasa ke kedudukan "HIDUP".
5. Begin vacuuming liquids. The vacuum has an automatic shut-off when the tank is full.
6. When the tank is full or you are finished, turn the power switch to "OFF" and unplug the appliance.
7. Empty the tank and clean the foam filter as described in the Maintenance section.

Penyelenggaraan

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner. Always unplug the appliance before performing any maintenance.

Mengosongkan Tangki

1. Cabut plag pembersih vakum.
2. Release the locking clips and remove the motor head assembly.
3. Carefully lift the tank from the wheeled base and empty its contents into a suitable disposal area.
4. Clean the inside of the tank with water and mild detergent if necessary, then dry thoroughly.

Pembersihan dan Penggantian Penapis

• Penapis Kartrij (Penggunaan Kering):
  • Remove the cartridge filter from the motor head.
  • Gently tap the filter to dislodge dust and debris. For heavy dirt, rinse under running water. Allow to air dry completely before reinstallation. Do not use the filter if it is still wet.
  • Gantikan penapis jika ia rosak atau haus secara berlebihan.
• Penapis Buih (Penggunaan Basah):
  • Remove the foam filter from the motor head.
  • Rinse the foam filter thoroughly under running water until clean.
  • Squeeze out excess water and allow to air dry completely before storage or next use.

Pembersihan Am

• Lap bahagian luar pembersih vakum dengan iklanamp kain. Jangan gunakan pembersih atau pelarut yang keras.
• Check the hose and accessories for blockages and clear them as needed.
• Inspect the power cord for any signs of damage. If damaged, have it replaced by a qualified technician.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. JBM products are designed for durability and performance. Should you require technical assistance or spare parts, please contact JBM customer support or an authorized service center.

Pengeluar: JBM

Maklumat Hubungan: Please refer to the official JBM website or your purchase documentation for the most current contact details for customer support and service.