pengenalan
Terima kasih kerana membeliasing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp direka untuk menyediakan ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Maklumat Keselamatan
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Gunakan hanya mentol daripada jenis dan kuasa yang dinyatakantage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- l iniamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Pastikan lamp diletakkan di atas permukaan yang stabil dan rata untuk mengelakkan terbalik.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Kandungan Pakej
Sila pastikan semua komponen ada sebelum memulakan pemasangan:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp soket)
- Hardware Pack (screws, washers, etc., if applicable)
- Kord Kuasa
Persediaan dan Perhimpunan
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Buka Pembungkusan Komponen: Keluarkan semua bahagian dari bungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan lembut untuk mengelakkan calar.
- Pasang tiang: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Lampirkan Pangkalan: Securely attach the assembled poles to the brushed steel lamp asas.
- Pasang Rak: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- Lampirkan Lamp Soket: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp soket.
- Masukkan Mentol: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp sockets. Do not overtighten.
- Kedudukan Lamp: Letakkan lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Rajah 2: Butiran lamp's base and shades.
Arahan Operasi
- Sambungan Kuasa: Palamkan lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Menghidupkan/Mematikan: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Penyelenggaraan
- Pembersihan: Untuk membersihkan lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Penggantian mentol: Sentiasa cabut plag lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lamp tidak menyala. | 1. Lamp tidak dipasang. 2. Bulb is loose or burnt out. 3. Salur keluar kuasa tidak berfungsi. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| Cahaya berkelip-kelip. | 1. Mentol longgar. 2. Incorrect bulb type/wattage. 3. Mentol rosak. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp adalah tidak stabil. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. Gerakkan lamp ke permukaan yang rata dan stabil. 2. Re-tighten all pole connections. |
Spesifikasi
- Nombor Model: 4305-22
- Dimensi (D x W x H): 11.7"D x 14"W x 68"H
- Berat Barang: 15.2 paun
- Jenis Bahan: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Warna teduhan: putih
- Bilangan Sumber Cahaya: 3
- Pangkalan Mentol: E26 Sederhana
- Wattage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Jenis Suis: Pull Chain (3 individual switches)
- Sumber Kuasa: Elektrik Bertali
- Panjang Kord: Kira-kira 5 kaki (60 inci)
- Jenis Pemasangan: Freestanding
- Penggunaan Dalaman/Luar: Dalaman Sahaja
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Maklumat Waranti
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Sokongan Pelanggan
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso webtapak untuk sumber sokongan.
Adesso Official Webtapak: www.adessohome.com