Manual Pengguna Peti Besi Elektronik SIGMA KSF2818

1. Pengenalan

Thank you for choosing the SIGMA KSF2818 Electronic Safe. This manual provides essential instructions for the proper setup, operation, and maintenance of your safe. Please read this manual thoroughly before using the product to ensure optimal security and functionality.

2. Maklumat Keselamatan Penting

• Do not store the emergency keys or this instruction manual inside the safe. Keep them in a secure, separate location.
• Do not store the user code written down inside the safe. Memorize your code or keep it in a secure, separate location.
• Pastikan peti besi dipasang dengan selamat untuk mengelakkan pengalihan yang tidak dibenarkan.
• Jauhkan bateri daripada kanak-kanak.
• Gantikan bateri dengan segera apabila penunjuk bateri lemah kelihatan untuk mengelak daripada terkunci.

3. Kandungan Pakej

Sila pastikan semua item ada dalam pakej:

• 1 x SIGMA KSF2818 Electronic Safe
• 2 x Kekunci Ganti Kecemasan
• Fixing Bolts (for mounting)
• 1 x Manual Pengguna (dokumen ini)

Figure 1: The SIGMA KSF2818 Electronic Safe, featuring a grey finish, an electronic keypad for code entry, and a circular keyhole for emergency access. The brand name "SIGMA" is visible in red on the top right corner of the door.

4. Persediaan dan Pemasangan

4.1. Pemasangan Bateri

1. Cari petak bateri di bahagian dalam pintu selamat.
2. Buka penutup bateri.
3. Insert 4 x AA batteries (not included) according to the polarity indicators (+/-).
4. Tutup penutup bateri.
5. A beep sound indicates successful battery installation.

4.2. Initial Code Setting

The safe comes with a factory default code (usually "159"). It is crucial to change this immediately.

1. Dengan pintu selamat terbuka, tekan butang set semula merah yang terletak di bahagian dalam pintu, berhampiran engsel. Anda akan mendengar bunyi bip.
2. Within 5 seconds, enter your new 3-8 digit code on the keypad.
3. Press the "A" or "#" button to confirm. The safe will beep twice, indicating the new code is set.
4. Uji kod baharu dengan pintu terbuka sebelum menutupnya.

4.3. Memasang Peti Keselamatan

The safe features pre-drilled holes for secure mounting to a wall or floor.

1. Pilih lokasi yang sesuai untuk pemasangan, pastikan permukaannya kukuh.
2. Tandakan titik penggerudian melalui lubang pra-gerudi di dalam peti besi.
3. Tebuk lubang pandu ke dinding atau lantai menggunakan mata gerudi yang sesuai.
4. Align the safe with the drilled holes and secure it using the provided fixing bolts.
5. Ensure the safe is firmly attached and cannot be easily removed.

5. Arahan Operasi

5.1. Membuka Peti Keselamatan dengan Kod Anda

1. Enter your 3-8 digit personal code on the keypad.
2. Press the "A" or "#" button to confirm.
3. If the code is correct, a green light will illuminate, and you will hear a beep.
4. Dalam masa 5 saat, putar tombol mengikut arah jam untuk membuka pintu selamat.

5.2. Membuka Peti Besi dengan Kunci Kecemasan

In case of forgotten code or dead batteries, use the emergency key:

1. Locate the keyhole cover, usually near the knob. Remove it.
2. Masukkan salah satu kunci kecemasan ke dalam lubang kunci.
3. Turn the key counter-clockwise while simultaneously turning the knob clockwise to open the safe.
4. Once open, you can replace the batteries if needed or reset your code.

5.3. Menutup Peti besi

1. Tutup pintu peti keselamatan dengan kuat.
2. Turn the knob counter-clockwise to lock the door.
3. Ensure the door is securely locked by gently pulling on the door.

6. Penyelenggaraan

6.1. Penggantian Bateri

When the batteries are low, the red light will flash, or the safe will beep continuously after entering the code. Replace all four batteries promptly.

1. Open the safe using your code or the emergency key.
2. Open the battery compartment cover on the inside of the door.
3. Tanggalkan bateri lama dan buang dengan bertanggungjawab.
4. Insert new 4 x AA batteries, observing correct polarity.
5. Tutup penutup bateri.
6. Your personal code will be retained even after battery replacement.

6.2. Pembersihan

Bersihkan bahagian luar peti besi dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan kemasan atau komponen elektronik.

7. Penyelesaian masalah

7.1. Peti Besi Tidak Dibuka dengan Kod

• Kod Salah: Ensure you are entering the correct 3-8 digit code followed by "A" or "#".
• Bateri Rendah: If the red light flashes or the safe beeps continuously, replace the batteries. Use the emergency key to open the safe if batteries are completely dead.
• Kepincangan Pad Kekunci: If the keypad is unresponsive, try replacing the batteries. If the issue persists, use the emergency key and contact support.

7.2. Safe Door Will Not Close Properly

• Halangan: Check for any objects blocking the door or the locking bolts.
• salah jajaran: Ensure the safe is mounted on a flat, stable surface and the door is properly aligned.

8. Spesifikasi

9. Waranti dan Sokongan

Specific warranty information for the SIGMA KSF2818 Electronic Safe is not available in this document. For warranty details, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer or the manufacturer directly.

You may also visit the official SIGMA webtapak untuk bantuan lanjut.