Tchibo B00LXY3NEW

TCM Tchibo Digital Radio Clock with Motion Sensor, LCD, and Crescendo Alarm

Model: B00LXY3NEW

pengenalan

Thank you for choosing the Tchibo Digital Radio Clock. This device combines a precise digital clock with a radio function and a convenient motion sensor for display illumination. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your product.

Arahan Keselamatan

  • Baca semua arahan dengan teliti sebelum digunakan dan simpan untuk rujukan pada masa hadapan.
  • Jangan dedahkan peranti kepada air, kelembapan tinggi atau suhu yang melampau.
  • Gunakan hanya jenis bateri yang dinyatakan. Pastikan kekutuban yang betul semasa memasukkan bateri.
  • Jangan cuba membuka atau membaiki peranti sendiri. Hubungi kakitangan perkhidmatan yang berkelayakan.
  • Jauhkan daripada kanak-kanak.
  • Buang bateri secara bertanggungjawab mengikut peraturan tempatan.

Kandungan Pakej

Sila pastikan semua item ada dalam pakej anda:

  • Tchibo Digital Radio Clock (1 unit)
  • Manual Arahan (dokumen ini)
  • Nota: Bateri tidak disertakan dan mesti dibeli secara berasingan.

Produk Selesaiview

Familiarize yourself with the main components of your radio clock:

Tchibo Digital Radio Clock, front view, showing LCD display and control buttons.

Imej 1: Depan view of the Tchibo Digital Radio Clock. The image displays the rectangular anthracite-colored clock with a clear LCD screen in the center. Below the screen, several control buttons are visible, likely for setting time, alarm, and radio functions. The overall design is modern and compact, suitable for a bedside table.

  • Paparan LCD: Menunjukkan masa, status penggera dan frekuensi radio.
  • Penderia Gerakan: Activates display backlight when motion is detected nearby.
  • Butang Kawalan: (e.g., SET, ALARM, MODE, TUNING, SNOOZE) - Specific button functions will be detailed in the "Operating" section.
  • Petak Bateri: Located on the back or bottom of the unit.

Persediaan

1. Powering On (Battery Installation)

  1. Locate the battery compartment cover on the back or bottom of the clock.
  2. Buka penutup.
  3. Insert the required batteries (e.g., 2x AA or AAA, refer to the compartment label) ensuring correct polarity (+/-).
  4. Tutup penutup petak bateri dengan selamat.
  5. The display should now light up, and the clock will attempt to synchronize the time automatically.

2. Penyegerakan Masa Awal

Your radio clock is designed to automatically synchronize with a radio time signal. This process may take a few minutes, especially during the first setup or after battery replacement. Ensure the clock is placed near a window or in an area with good reception.

  • During synchronization, an icon (e.g., an antenna symbol) may flash on the display.
  • Once synchronized, the icon will become solid, and the correct time will be displayed.

3. Manual Time Setting (If Automatic Fails)

If the clock fails to synchronize automatically or if you wish to set the time manually:

  1. Tekan dan tahan butang SET button for approximately 3 seconds until the hour digits start flashing.
  2. Gunakan UP or TURUN buttons (or similar, depending on model) to adjust the hour.
  3. Tekan SET sekali lagi untuk mengesahkan jam dan beralih ke tetapan minit.
  4. Laraskan minit menggunakan UP or TURUN butang.
  5. Tekan SET untuk mengesahkan dan keluar daripada mod tetapan masa.

4. Menetapkan Penggera

Your clock features a Crescendo alarm, which gradually increases in volume.

  1. Tekan dan tahan butang PENGGERA button for approximately 3 seconds until the alarm hour digits flash.
  2. Gunakan UP or TURUN butang untuk menetapkan jam penggera yang diingini.
  3. Tekan PENGGERA sekali lagi untuk mengesahkan jam dan beralih ke tetapan minit.
  4. Adjust the alarm minutes using the UP or TURUN butang.
  5. Tekan PENGGERA to confirm and exit alarm setting mode.
  6. Untuk mengaktifkan/menyahaktifkan penggera, tekan sebentar PENGGERA butang. Ikon penggera akan muncul/hilang pada paparan.

5. Penalaan Radio

(Note: While the product is a "radio clock", specific radio tuning details are not provided. This section assumes basic functionality.)

  1. Tekan ke RADIO or MODE button to switch to radio mode.
  2. Gunakan MENALA or ATAS/BAWAH butang untuk menala secara manual ke stesen yang anda inginkan.
  3. Some models may have an auto-scan function; press and hold the MENALA butang untuk mengaktifkannya.

Beroperasi

1. Ciri Paparan

  • Paparan LCD: The main display shows the current time, and when active, the alarm time or radio frequency.
  • Motion Sensor Backlight: The display is designed to be dim in normal conditions to avoid disturbing sleep. To illuminate the display, wave your hand over the top of the clock or activate the motion sensor area. The backlight will activate for a few seconds.

2. Fungsi Penggera

  • Penggera Crescendo: When the alarm sounds, its volume will gradually increase over a short period to gently wake you up.
  • Fungsi Tunda: Apabila penggera berbunyi, tekan MENGEJUTKAN button (usually a large button on top). The alarm will pause for a set period (e.g., 5-10 minutes) and then sound again.
  • Menghentikan Penggera: To turn off the alarm for the day, press any other button (e.g., PENGGERA, SET) while it is sounding. The alarm will reset for the next day if it is still activated.

3. Radio Functions

  • Switching to Radio: Tekan ke RADIO or MODE butang untuk mendengar radio.
  • Kawalan Kelantangan: Gunakan yang berdedikasi JILID +/- butang atau ATAS/BAWAH buttons in radio mode to adjust the sound level.
  • Switching Off Radio: Tekan ke DIMATIKAN or MODE button again to return to clock display or turn off the radio.

Penyelenggaraan

1. Pembersihan

  • Lap jam dengan kain lembut, kering atau sedikit keringamp kain.
  • Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and electronic components.
  • Pastikan tiada cecair memasuki peranti.

2. Penggantian Bateri

  • When the display becomes dim or functions become erratic, it's time to replace the batteries.
  • Follow the "Powering On (Battery Installation)" steps in the Setup section to replace old batteries with new ones.
  • Buang bateri terpakai mengikut peraturan persekitaran tempatan.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Paparan kosong atau malap.Low or dead batteries; motion sensor not activated.Replace batteries. Wave hand over the motion sensor area to activate backlight.
Masa tidak betul atau tidak disegerakkan.Poor radio signal; interference; initial synchronization failed.Move the clock to a location with better reception (e.g., near a window). Perform manual time setting.
Penggera tidak berbunyi.Alarm is not activated; alarm volume is too low.Ensure the alarm icon is visible on the display. Check alarm settings and volume.
Penerimaan radio kurang baik.Isyarat lemah; gangguan.Adjust the clock's position. Extend any built-in antenna if available.

Spesifikasi

CiriPerincian
JenamaTchibo
ModelB00LXY3NEW
warnaAntrasit
Jenis PaparanLCD Digital
Gayamoden
Ciri KhasAlarm, Radio, Motion Sensor, Crescendo Alarm
Sumber KuasaDikuasakan Bateri
bentuksegi empat tepat
Bahan BingkaiAkrilonitril Butadiena Stirena (ABS)
Bateri TermasukTidak
Jenis PemasanganAtas meja
Jenis PergerakanKuarza

Waranti dan Sokongan

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions.

For technical support or service inquiries, please contact the retailer where you purchased the product or visit the official Tchibo weblaman web untuk maklumat khidmat pelanggan.

© 2023 Tchibo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.