CGOLDENWALL Electric Rotary Fabric Cutter User Manual

1. Pengenalan

Thank you for choosing the CGOLDENWALL Electric Rotary Fabric Cutter. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new device. Please read it thoroughly before first use and keep it for future reference.

Figure 1: CGOLDENWALL Electric Rotary Fabric Cutter, a powerful tool for cutting various materials.

2. Arahan Keselamatan

Sentiasa ikuti langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri.

• Baca semua arahan: Biasakan diri anda dengan kawalan dan penggunaan alat yang betul.
• Pastikan kawasan kerja bersih: Kawasan bersepah mengundang kemalangan.
• Elakkan persekitaran berbahaya: Jangan gunakan alatan kuasa dalam damp atau lokasi basah, atau mendedahkannya kepada hujan. Pastikan kawasan kerja tetap terang.
• Jauhkan kanak-kanak: Semua pelawat hendaklah berada pada jarak yang selamat dari kawasan kerja.
• Berpakaian dengan betul: Jangan memakai pakaian atau barang kemas yang longgar. Mereka boleh ditangkap di bahagian yang bergerak. Sarung tangan getah dan kasut tidak tergelincir disyorkan apabila bekerja di luar rumah. Pakai penutup rambut pelindung untuk mengandungi rambut panjang.
• Gunakan cermin mata keselamatan: Always use safety glasses and hearing protection.
• Jangan melampaui batas: Pastikan pijakan dan keseimbangan yang betul pada setiap masa.
• Disconnect tools: Disconnect the tool from the power supply when not in use, before servicing, or when changing accessories.
• Elakkan permulaan secara tidak sengaja: Ensure the switch is in the off position before plugging in.
• Use right tool: Jangan paksa alat. Gunakan alat yang betul untuk aplikasi anda.
• Simpan alat dengan berhati-hati: Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have them repaired by an authorized service facility.
• Periksa bahagian yang rosak: Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual.
• Do not cut cardboard or fleece: These materials are not recommended for this electric fabric cutter.

3. Kandungan Pakej

Pastikan semua barang ada dan dalam keadaan baik semasa membuka bungkusan.

• CGOLDENWALL Electric Rotary Fabric Cutter (Model: CGoldenWall273)
• Bilah Pengganti
• Abrasive Wheel (Sharpening Stone)
• Cross Connection
• Spanar
• Pin Silinder
• Electrical Brush (x2)
• Kertas pasir

Rajah 2: View of the included accessories and components in the package.

4. Spesifikasi

Figure 3: Key product information and specifications.

5. Persediaan

1. Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Simpan pembungkusan untuk penyimpanan atau pengangkutan masa hadapan.
2. Periksa: Check the cutter and all accessories for any signs of damage. Do not use if any part is damaged.
3. Initial Sharpening: For a new cutter, it is recommended to sharpen the blades first. Lightly press the built-in sharpener for 1-3 seconds to automatically sharpen the blade.
4. Sambungan Kuasa: Ensure the power switch is in the "OFF" position before plugging the cutter into a 110V power outlet.

Figure 4: The cutter features an automatic sharpening stone for easy maintenance.

6. Arahan Operasi

1. Sediakan Bahan: Lay the fabric or material flat on a stable cutting surface. For precise cuts, it is advisable to draw your cutting lines with chalk before operating the cutter.
2. Adjust Knife Guard: The front knife-guard can be adjusted up and down to set the desired cutting thickness. This also acts as a safety device.
3. Hidupkan kuasa: Plug the cutter into a 110V power outlet.
4. Activate Cutter: Press the trigger switch to start the motor. Be careful of the trigger switch and always unplug when not in use.
5. Memotong: Guide the cutter along your drawn lines. The octagonal blade and high speed (2400 RPM) ensure quick, clean, and smooth cuts. The cutter is designed for both straight and curved cutting. It can cut multi-layer cloth, fabric, cotton, silk, synthetic fiber, and leather up to 25mm (1 inch) thick.
6. Handling Heavy Materials: Due to its powerful motor, the machine weighs approximately 3.1lb. For extended use or heavy materials, it is recommended to use both hands or move it by hand-pushing the blade base to save labor.
7. Matikan: Release the trigger switch to stop the motor. Always unplug the cutter from the power outlet immediately after use.

Figure 5: The cutter is versatile for both straight and curved cuts.

Figure 6: Proper use of the trigger switch for starting and stopping the cutter.

Figure 7: The cutter is capable of cutting multiple layers of fabric up to 1 inch thick.

Figure 8: The powerful motor allows cutting of various materials including leather, cloth, fabric, chiffon, and carpet.

6.1. Video Produk Rasmi

7. Penyelenggaraan

1. Mengasah Bilah: The cutter has a built-in sharpening stone. Lightly press the sharpener for 1-3 seconds to automatically sharpen the blade. It is recommended to sharpen the blade before each use or as needed to maintain optimal cutting performance.
2. Pembersihan: After each use, pay attention to clean any remaining cloth scraps on the blade and around the cutting mechanism. This prevents the blade from jamming due to long-term accumulation of debris.
3. Pelinciran: Regularly lubricate moving parts as indicated in the product diagram or as needed to ensure smooth operation and prolong the life of the tool.
4. Penggantian Bilah: If the blade becomes dull or damaged beyond sharpening, replace it with a new one. Use the provided spanner and cylindrical pin to safely remove and install the octagonal blade.

8. Penyelesaian masalah

9. Maklumat Waranti

The CGOLDENWALL Electric Rotary Fabric Cutter comes with a Waranti Pengeluar 1 Tahun. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the documentation provided with your product or contact CGOLDENWALL customer support.

10. Sokongan Pelanggan

For any questions, technical assistance, or warranty inquiries, please contact CGOLDENWALL customer support through the retailer where you purchased the product or visit the official CGOLDENWALL webtapak untuk maklumat hubungan.

Anda juga boleh melawat CGOLDENWALL Store on Amazon untuk lebih banyak produk dan maklumat.