Holzmann BF25VLN Drill and Milling Machine User Manual

1. Pengenalan dan Maklumat Keselamatan

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Holzmann BF25VLN Drill and Milling Machine. Read and understand all instructions before operating the machine. Failure to follow these instructions may result in serious injury or damage to the equipment.

Amaran Keselamatan Am

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and suitable work clothing.
• Pastikan kawasan kerja bersih, terang dan bebas daripada halangan.
• Keep children and bystanders away from the machine during operation.
• Disconnect the machine from the power supply before making any adjustments, changing accessories, or performing maintenance.
• Securely fasten the workpiece before drilling or milling to prevent movement.
• Never operate the machine if it is damaged or malfunctioning.
• Use only accessories and attachments recommended by Holzmann.

2. Produk Lebihview

The Holzmann BF25VLN is a versatile drill and milling machine designed for precision work. It features a variable angle head, allowing for flexible drilling and milling operations. The machine is powered by a corded electric motor, providing consistent performance.

Komponen yang Disertakan

• Holzmann BF25VLN Drill and Milling Machine
• Gerudi mata
• sepana

Image 1: The Holzmann BF25VLN Drill and Milling Machine. This image shows the overall structure of the machine, including the main body, drill head, and base. It provides a visual reference for identifying the product.

3. Persediaan

Proper setup is crucial for safe and accurate operation. Follow these steps to prepare your machine for use:

1. Membongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Periksa untuk sebarang kerosakan penghantaran. Laporkan sebarang kerosakan kepada pembekal anda dengan segera.
2. Pemasangan: Securely mount the machine to a sturdy workbench or stand using appropriate fasteners. Ensure the mounting surface can support the weight of the machine and any workpiece.
3. Sambungan Kuasa: Connect the machine to a grounded 230 Volt power outlet. Ensure the power supply matches the machine's requirements. Do not use extension cords unless absolutely necessary, and ensure they are rated for the machine's power consumption.
4. Pemasangan Alat: Insert the appropriate drill bit or milling cutter into the chuck. Tighten the chuck securely using the provided wrench. Ensure the tool is properly seated and centered.
5. Bahan kerja Clamping: Sentiasa clamp the workpiece firmly to the machine table using suitable clamps or a vise. Never hold the workpiece by hand during operation.

4. Arahan Operasi

Familiarize yourself with the controls and functions before beginning any work.

Operasi Asas

1. Hidupkan kuasa: Hidupkan mesin menggunakan suis kuasa utama.
2. Pemilihan Kelajuan: Adjust the spindle speed according to the material and tool being used. Refer to material-specific guidelines for optimal speeds.
3. Kedudukan: Carefully position the workpiece and adjust the machine head or table to align the tool with the desired drilling or milling location.
4. Penggerudian: Slowly lower the spindle, applying steady pressure. Allow the drill bit to cut through the material. Avoid excessive force.
5. Pengilangan: For milling operations, engage the feed mechanism (if applicable) or manually move the workpiece table. Take light passes to avoid overloading the machine or breaking the cutter.
6. Variable Angle Feature: To utilize the variable angle feature, loosen the locking mechanism for the head, adjust to the desired angle, and securely re-tighten the lock before operation.
7. Matikan: Once the operation is complete, raise the spindle, turn off the machine, and wait for all moving parts to stop before removing the workpiece.

Petua Operasi Penting

• Always use sharp and appropriate cutting tools.
• Apply cutting fluid when necessary to improve tool life and finish.
• Clear chips and debris regularly, but only when the machine is off and stationary.

5. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your Holzmann BF25VLN machine.

Penyelenggaraan Harian

• Clean the machine thoroughly after each use, removing all chips and dust.
• Periksa kord kuasa untuk sebarang kerosakan.
• Periksa sama ada semua pengikat adalah ketat.

Penyelenggaraan Mingguan/Bulanan

• Lubricate all moving parts and sliding surfaces with appropriate machine oil.
• Inspect the chuck and spindle for wear or damage.
• Check belt tension (if applicable) and adjust as needed.

Nota: Always disconnect the machine from the power supply before performing any maintenance or cleaning.

6. Penyelesaian masalah

Bahagian ini menyediakan penyelesaian kepada isu biasa yang mungkin anda hadapi.

If you encounter problems not listed here or if solutions do not resolve the issue, contact Holzmann customer support or a qualified technician.

7. Spesifikasi

Key technical specifications for the Holzmann BF25VLN Drill and Milling Machine:

• Jenama: Holzmann
• model: BF25VLN
• Sumber Kuasa: Elektrik Bertali
• Voltage: 230 Volt
• Ciri Khas: Variable Angle
• Drill Type: Latih Tubi Asas
• Drilling Capacity in Wood: 25 Milimeter
• Komponen yang Disertakan: Drill bit, wrench

8. Waranti dan Sokongan

For specific warranty information, please refer to the documentation provided at the time of purchase or contact your authorized Holzmann dealer. Information regarding the availability of spare parts is not provided in this manual; please contact Holzmann customer service or your retailer for assistance with parts and technical support.

For further assistance, visit the official Holzmann weblaman web atau hubungi jabatan sokongan pelanggan mereka.