ET2 Harmony E24506-91PC LED Pendant Light Instruction Manual

1. Pengenalan dan Lebihview

This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 Harmony E24506-91PC LED Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The ET2 Harmony pendant light features multiple bubble glass balls, each illuminated by an integrated LED. The individual pendants are suspended by adjustable cables, allowing for customization of the fixture's overall design and drop height. The fixture is designed for indoor use and is fully dimmable.

Image 1.1: The ET2 Harmony E24506-91PC LED Pendant Light, showcasing its design with multiple bubble glass spheres.

2. Maklumat Keselamatan

WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing any components. Consult a qualified electrician if you are unsure about the installation process.

• Produk ini mesti dipasang mengikut kod pemasangan yang berkenaan oleh orang yang biasa dengan pembinaan dan pengendalian produk serta bahaya yang terlibat.
• Use only UL Listed wire connectors.
• Jangan melebihi vol yang ditentukantage (120 Volt).
• Jangan ubah suai lekapan dalam apa jua cara.
• Jauhkan bahan mudah terbakar daripada lampu.
• Pakai cermin mata dan sarung tangan keselamatan semasa pemasangan.

3. Kandungan Pakej

Carefully unpack the fixture and check that all components are present and undamaged. Retain all packaging materials until installation is complete.

• Pendant Light Fixture (Canopy with integrated LED pendants)
• Mounting Hardware (Mounting plate, screws, wire nuts)
• Manual Arahan (Dokumen ini)

4. Persediaan dan Pemasangan

Installation should be performed by a qualified electrician or a person with experience in electrical wiring.

4.1 Alat Diperlukan (Tidak Termasuk)

• Pemutar skru kepala Phillips
• Pemutar skru kepala rata
• Strippers wayar
• Pita elektrik
• Tangga

4.2 Langkah Pemasangan

1. Matikan Kuasa: Locate the circuit breaker or fuse box controlling the power to the installation location and turn off the power. Verify power is off using a voltage penguji.
2. Sediakan Permukaan Pemasangan: Ensure the junction box is securely mounted and capable of supporting the fixture's weight (approximately 11.07 pounds).
3. Pasang Plat Pemasangan: Secure the fixture's mounting plate to the junction box using the provided screws.
4. Buat Sambungan Elektrik:
   • Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut.
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
   • Ensure all connections are secure and insulated with electrical tape if necessary.
5. Secure Fixture Canopy: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws.
6. Laraskan Panjang Loket: The individual pendant cables are adjustable. To adjust, gently push the cable into the canopy's cable grip and pull to the desired length. Ensure all pendants are securely set before proceeding.
7. Install Glass Balls: The bubble glass balls are pre-installed with LED bulbs. Ensure they are securely attached to their respective pendant cables.
8. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan selamat, pulihkan kuasa pada pemutus litar.

Image 4.1: Dimensional drawing of the ET2 Harmony E24506-91PC, indicating a 12.75-inch width and a maximum overall height of 126 inches.

Image 4.2: Detail of the fixture's polished chrome canopy and the attachment points for the adjustable pendant cables.

5. Arahan Operasi

The ET2 Harmony E24506-91PC LED Pendant Light is designed for simple operation.

• Hidupkan/Mati Kuasa: Kawal lampu menggunakan suis dinding standard yang disambungkan ke litar lekapan.
• Fungsi Peredupan: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch. Consult your electrician for dimmer compatibility.

6. Penyelenggaraan

Penyelenggaraan tetap akan membantu mengekalkan penampilan dan kefungsian lampu loket anda.

• Pembersihan: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the polished chrome finish and glass spheres. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Penggantian LED: The integrated LED bulbs are designed for long life. If replacement is ever needed, contact ET2 customer support for guidance on obtaining compatible replacement parts. Do not attempt to replace LEDs with standard bulbs.

7. Penyelesaian masalah

If you experience issues with your pendant light, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact ET2 customer support.

8. Spesifikasi

9. Waranti dan Sokongan

9.1 Maklumat Waranti

This ET2 Harmony E24506-91PC LED Pendant Light is covered by a Waranti terhad pengeluar 1 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

9.2 Sokongan Pelanggan

For technical assistance, warranty claims, or to order replacement parts, please contact ET2 customer support. Have your model number (E24506-91PC) and proof of purchase ready when contacting support.

You can find contact information for ET2 by visiting their official webtapak atau peruncit tempat produk itu dibeli.