Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Ketua Manual Pengguna

1. Pengenalan

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Ciri-ciri Utama:

Ultra-compact, portable ampkepala penguat.
Inspired by the legendary Vox AC30 ampnada penyaman.
Separate Volume and Gain control knobs.
EQ 3-jalur (Bes, Tengah, Treble) untuk pembentukan ton.
Integrated FX Loop for external effects integration.

2. Arahan Keselamatan

Bekalan Kuasa: Use only the specified 18V DC power adapter (center negative). Incorrect voltage boleh merosakkan unit tersebut.
Pengudaraan: Pastikan pengudaraan yang mencukupi. Jangan sekat bukaan pengudaraan.
Kelembapan: Jauhkan unit daripada air atau kelembapan berlebihan.
haba: Elakkan meletakkan unit berhampiran sumber haba atau di bawah cahaya matahari langsung.
Pembersihan: Bersihkan hanya dengan kain kering.
Servis: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.

3. Produk Lebihview

Hotone Nano Legacy British Invasion AmpKetua pengangkat

Imej: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Ketua, tunjukkanasing its compact size and overall design.

Kawalan Panel Depan:

Hotone Nano Legacy British Invasion Front Panel Diagram

Imej: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

MASUKKAN: 1/4" mono jack for connecting your guitar.
ASAS: Controls the low frequency response of your tone.
TENGAH: Controls the mid frequency response of your tone.
Treble: Controls the high frequency response of your tone.
DAPATKAN: Controls the pre-amp gain level, affecting distortion and sustain.
JILID: Mengawal volum keluaran keseluruhan amplebih hidup.
Suis ON / OFF: Menghidupkan atau mematikan unit.

Sambungan Panel Belakang:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Imej: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

18V DC: Power input for the included 18V DC adapter (center negative).
TELEFON/TALIAN OUTPUT: 1/8" stereo jack for headphones or direct recording.
AUX DI: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
FX LOOP RETURN: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
OUTPUT SPEAKER: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
HANTAR LOOP FX: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Persediaan dan Sambungan

Sambungan Kuasa: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
Sambungan Gitar: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
Sambungan Pembesar Suara: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Amaran: Jangan kendalikan amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
AUX Input (Optional): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Arahan Operasi

Hidupkan kuasa: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
Tetapan Awal: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
Melaraskan Keuntungan: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
Melaraskan Kelantangan: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
Tone Shaping with EQ:
- ASAS: Adjust for low-end warmth and fullness.
- TENGAH: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
- Treble: Adjust for brightness and clarity.
Matikan: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Penyelenggaraan

Pembersihan: Gunakan kain lembut dan kering untuk membersihkan bahagian luar amplifier. Do not use liquid cleaners, aerosols, or solvents.
Storan: Simpan amppenyangga di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
Pengangkutan: When transporting, ensure the amplifier is securely packed to prevent physical damage.
Penjagaan Kabel: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Penyelesaian masalah

Masalah	Kemungkinan Punca	Penyelesaian
Tiada keluaran bunyi	Kuasa tidak disambungkan atau dihidupkan. Kabel gitar rosak atau tidak dipasang sepenuhnya. Speaker cable faulty or not fully inserted. Ketidakpadanan impedans pembesar suara. Volume/Gain knobs set to minimum. Headphones connected to PHONES/LINE OUT.	Periksa sambungan kuasa dan suis ON/OFF. Ensure guitar cable is secure and functional. Ensure speaker cable is secure and functional. Verify speaker impedance is 4-16Ω. Increase Volume and Gain. Disconnect headphones if using speaker output.
Dengungan atau bunyi bising yang berlebihan	Faulty power supply or ground loop. Tetapan gandaan tinggi. Gangguan daripada peranti elektronik lain. Single-coil pickups (inherently more susceptible to hum).	Try a different power outlet or a high-quality isolated power supply. Kurangkan tetapan gandaan. Bergerak amppengalir jauh daripada elektronik lain. Consider using humbucker pickups or a noise gate pedal.
Bunyi herot atau lemah	Kabel rosak. Sambungan pembesar suara yang salah. Pembesar suara rosak. Input signal too hot.	Periksa dan gantikan kabel jika perlu. Ensure speaker cable is correctly connected and speaker impedance is correct. Test with a different speaker if possible. Reduce output from guitar or preceding pedals.

8. Spesifikasi

model:	TANLA1
Output Wattage:	5 Watt
Sumber Kuasa:	Elektrik Berwayar (18V DC, pusat negatif)
Peranti Serasi:	Gitar
Jenis Penyambung:	1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Berat Barang:	15.5 auns (lebih kurang 440 gram)
Dimensi Produk:	2.34 x 5.03 x 2.95 inci (lebih kurang 5.9 x 12.8 x 7.5 cm)
Jenis Bahan:	Keluli Tahan Karat
warna:	Hitam

9. Maklumat Waranti

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

10. Sokongan Pelanggan

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone webtapak.

Visit Hotone Audio Support Page (Cthamppautan le, pautan sebenar mungkin berbeza-beza)

HOTONE TANLA1